poultry meat processing (41 Ergebnisse)

Zustand: New. In.

Zustand: Good. 263 pp., hardcover, ex library, else text and binding still clean, tight and bright. - If you are reading this, this item is actually (physically) in our stock and ready for shipment once ordered. We are not bookjackers. Buyer is responsible for any additional duties, taxes, or fees required by recipient's country.

Zustand: New.

Paperback. Zustand: Very Good. No Jacket. May have limited writing in cover pages. Pages are unmarked. ~ ThriftBooks: Read More, Spend Less 1.01.

Zustand: New. pp. 496 Figures.

1st ed. 159 x 235 cm. 380 pages. Hardcover. Versand aus Deutschland / We dispatch from Germany via Air Mail. Einband bestoßen, daher Mängelexemplar gestempelt, sonst sehr guter Zustand. Imperfect copy due to slightly bumped cover, apart from this in very good condition. Stamped. Sprache: Englisch.

Zustand: Good. Most items will be dispatched the same or the next working day. A copy that has been read but remains in clean condition. All of the pages are intact and the cover is intact and the spine may show signs of wear. The book may have minor markings which are not specifically mentioned.

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - The past decade has seen growing interest in the use of robotic technology in the food sector. There is a strong indication that this sector and, in particular, industries dealing with meat, fish and poultry products, would make even more use of robotics if such technology were better suited to the specific needs of the food production environment. Clearly the poten tial is high. This book aims to provide the reader with the state of robotic technology currently under development. For the first time a series of chapters, written by leading international authors, brings together a range of topics in robotics as applicable to meat, fish and poultry processing. The contents will interest researchers, managers, manufacturing engin eers, consultants and students. Manufacturers and suppliers of robotic technology or food machinery are strongly recommended to examine the content and exploit the potential benefits described. The co-operation and indeed the full active involvement of research establishments, manufac turers and food producers in teams, is essential in order to achieve the maximum use of robotics.

Hardcover. Zustand: Very Good. No Jacket. May have limited writing in cover pages. Pages are unmarked. ~ ThriftBooks: Read More, Spend Less 1.06.

Hardcover. Zustand: Good. No Jacket. Pages can have notes/highlighting. Spine may show signs of wear. ~ ThriftBooks: Read More, Spend Less 1.06.

Hardcover. Zustand: Good. No Jacket. Former library book; Missing dust jacket; Pages can have notes/highlighting. Spine may show signs of wear. ~ ThriftBooks: Read More, Spend Less 1.06.

Zustand: Gut. Zustand: Gut | Sprache: Englisch | Produktart: Bücher.

Zustand: Very Good. Ships from the UK. Former library book; may include library markings. Used book that is in excellent condition. May show signs of wear or have minor defects.

Zustand: Gut. Zustand: Gut | Sprache: Englisch | Produktart: Bücher.

Zustand: New. In.

Zustand: New. Editor(s): Khodabandehloo, K. Num Pages: 214 pages, biography. BIC Classification: TDCT. Category: (P) Professional & Vocational. Dimension: 234 x 156 x 12. Weight in Grams: 355. . 2012. Softcover reprint of the original 1st ed. 1993. Paperback. . . . . Books ship from the US and Ireland.

Zustand: New. In.

Zustand: New. In.

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - The RACCP (hazard analysis critical control point) concept for food products was an outgrowth of the US space program with the demand for a safe food supply for manned space flights by the National Aeronautics and Space Administration (NASA). The original work was carried out by the Pillsbury Company under the direction of Roward E. Bauman, who as the author of chapter 1 describes the evolution of the RACCP system and its adaptation to foods. The second chapter discusses the adoption of RACCP principles and explains how they fit into the USDA and FDA meat, poultry and seafood inspection systems. The next chapter discusses how RACCP principles can be extended to production of meat, poultry and seafoods, a most important area involved in producing a safe food supply. Chapter 4 deals with the use of RACCP in controlling hazards encountered in slaughtering and distribution of fresh meat and poultry, while chapter 5 discusses the problem - both spoilage and hazards - involved in processing and distribution of meat, poultry and seafood products. Chapter 6 covers the entire area of fish and seafoods, including both fresh and processed products from the standpoints of spoilage and hazards.

Gebunden. Zustand: New.

Zustand: Good. Your purchase helps support Sri Lankan Children's Charity 'The Rainbow Centre'. Ex-library, so some stamps and wear, but in good overall condition. Our donations to The Rainbow Centre have helped provide an education and a safe haven to hundreds of children who live in appalling conditions.

Buch. Zustand: Neu. Neuware - 1 Capabilities and potential of robotics.- 1.1 Robotic technology and capability.- 1.2 Current robotic devices in use in the food sector.- 1.3 Production of primal cuts from carcasses.- 1.3.1 Manual methods for pig and sheep butchery.- 1.3.2 Primal cuts and the need for automation.- 1.3.3 Robotics and vision integration for the production of primal cuts.- 1.3.4 Automatic handling and constraints in manipulation.- 1.3.5 System trials and successes in automated production of primal cuts.- 1.4 Concluding remarks.- References.- 2 Fish processing using computer vision and robots.- 2.1 Introduction.- 2.2 Current procedures in fish processing.- 2.2.1 Work procedure.- 2.2.2. Production control.- 2.3 Implementation aspects.- 2.3.1 Fish characteristics.- 2.3.2 Image acquisition.- 2.3.3 Computer vision algorithms.- 2.3.4 Robotic manipulator.- 2.3.5 End-effectors.- 2.3.6 The environment.- 2.4 Robotic and vision systems in use for fish processing.- 2.4.1 Vision systems.- 2.4.2 Robots.- 2.5 New applications and technological needs.- 2.5.1 Handling.- 2.5.2 Sorting.- 2.5.3. Inspection.- 2.6 Concluding remarks.- References.- 3 Robotics and the poultry processing industry.- 3.1 Introduction.- 3.2 The typical poultry processing operation.- 3.3 Issues impacting the potential for robotics in poultry processing.- 3.4 Evolution of automation in processing plants.- 3.5 Traypack workcell.- 3.5.1 Manual operation.- 3.5.2 Cell design.- 3.5.3 System programming/path planning.- 3.5.4 End-effector design.- 3.5.5 Discussion.- 3.6 Parts transfer/loading workcell.- 3.6.1 Current operation.- 3.6.2 Workcell design.- 3.6.3 Gripper design.- 3.6.4 Software design/programming.- 3.6.5 Cycle time optimization.- 3.6.6 Grip reliability.- 3.6.7 Discussion.- 3.7 Vision for quality and machine control.- 3.7.1 Introduction.- 3.7.2 Grey-scale analysis.- 3.7.3 Color analysis.- 3.7.4 Machine guidance.- 3.7.5 Discussion.- 3.8 Future directions and development needs.- References.- 4 Robotic packaging of poultry products.- 4.1 Introduction.- 4.2 The end-effector.- 4.2.1 Parallel action base.- 4.2.2 Finger assemblies.- 4.3 The vision system.- 4.3.1 Object recognition.- 4.3.2 Recognition algorithms.- 4.3.3 Comparison of recognition algorithms.- 4.4 Vision system software.- 4.4.1 Training and recognition.- 4.4.2 Sensitivity.- 4.4.3 Grey-scale resolution.- 4.4.4 Threshold setting.- 4.4.5 Bruise detection.- 4.5 Robot system integration.- 4.6 Poultry weight saving simulation.- 4.6.1 The product type simulated.- 4.6.2 FWFP production without a picking strategy.- 4.6.3 FWFP production using a picking strategy.- 4.6.4 Results of the simulation programs.- 4.6.5 Refinement of the picking strategy.- 4.7 Conclusions.- Acknowledgements.- References.- 5 Robotic cutting of beef and deboning.- 5.1 Introduction.- 5.2 Robotic butchery system requirements.- 5.3 Butchery system operation scheme.- 5.3.1 Forequarter clamping.- 5.3.2 Cutting scheme.- 5.3.3 Forequarter database (FQDB).- 5.3.4 Cutting devices.- 5.3.5 Cutting trials.- 5.3.6 Cutting control algorithm.- 5.4 Further work.- 5.5 Conclusions.- Acknowledgements.- Appendix 1: Cutting scheme definition.- Appendix 2: Forequarter measurement points.- References.- 6 Automation in the production of pork meat.- 6.1 Processes in pig carcass production and handling.- 6.1.1 Handling and stunning.- 6.1.2 Sticking, bleeding and surface treatment.- 6.1.3 Evisceration and trimming.- 6.1.4 Meat inspection and carcass classification.- 6.1.5 Chilling, selection and further processing.- 6.2 Current trends in mechanisation and automation in the pork industry.- 6.2.1 Single process automation.- 6.2.2 Transport and handling automation.- 6.2.3 Integrated systems.- 6.3 Potential for improving quality by automation.- 6.3.1 Welfare and meat quality.- 6.3.2 Hygiene and process control.- 6.3.3 Potential for classification technology.- 6.4 Automatic grading system and description of a current system in use.- 6.4.1 Measurement of anatomical dimensions.- 6.4.2 Prob.

Zustand: New.

Paperback. Zustand: Brand New. 393 pages. 8.75x6.00x1.00 inches. In Stock.

Hardcover. Zustand: Brand New. 1st edition. 393 pages. 9.75x6.50x1.25 inches. In Stock.

Zustand: New. In.

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - The central theme for this volume was chosen since consumers have great interest in purchasing low fat, low salt and reduced cholesterol meat, poultry and fish products. As in past volumes, experts in the field have been chosen to write chapters with emphasis on their breadth of knowl edge in each specific area. Efforts were also made to obtain authors from different countries in order to give the book a worldwide perspective. Chapter I stresses the nutritional and sensory properties that meat, poultry and fish products make to healthful diets and discusses consumer concerns about these products. Chapter 2 covers dietary recommendations in major consumer nations, along with data from food composition tables and the dietary contributions of meat, poultry and fish to meeting dietary needs. Chapter 3 discusses the labeling of low and reduced fat/salt prod ucts which, although written mainly from the US viewpoint, may serve as a model for labeling in other countries. Chapter 4 reviews the rationale for reducing fat-energy levels in muscle foods, problems encountered in their production and how these may be solved. Chapter 5 discusses the scientific basis for reducing the salt (sodium) content in food products and the health benefits derived from lowering salt intake. Methods of reducing the cholesterol content of these animal products is reviewed in Chapter 6.

Zustand: New. Series: Advances in Meat Research (Closed). Num Pages: 408 pages, 2 black & white illustrations, biography. BIC Classification: TDCT. Category: (P) Professional & Vocational. Dimension: 235 x 155 x 21. Weight in Grams: 629. . 2013. Softcover reprint of the original 1st ed. 1995. Paperback. . . . . Books ship from the US and Ireland.

Zustand: New. In.

Buch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - The central theme for this volume was chosen since consumers have great interest in purchasing low fat, low salt and reduced cholesterol meat, poultry and fish products. As in past volumes, experts in the field have been chosen to write chapters with emphasis on their breadth of knowl edge in each specific area. Efforts were also made to obtain authors from different countries in order to give the book a worldwide perspective. Chapter I stresses the nutritional and sensory properties that meat, poultry and fish products make to healthful diets and discusses consumer concerns about these products. Chapter 2 covers dietary recommendations in major consumer nations, along with data from food composition tables and the dietary contributions of meat, poultry and fish to meeting dietary needs. Chapter 3 discusses the labeling of low and reduced fat/salt prod ucts which, although written mainly from the US viewpoint, may serve as a model for labeling in other countries. Chapter 4 reviews the rationale for reducing fat-energy levels in muscle foods, problems encountered in their production and how these may be solved. Chapter 5 discusses the scientific basis for reducing the salt (sodium) content in food products and the health benefits derived from lowering salt intake. Methods of reducing the cholesterol content of these animal products is reviewed in Chapter 6.