Perotto simona (29 Ergebnisse)

Zustand: New. In English.

Zustand: New. In English.

Hardcover. Zustand: Brand New. 2015 edition. 300 pages. 9.25x6.25x1.00 inches. In Stock.

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - This volume collects selected contributions from the 'Fourth Tetrahedron Workshop on Grid Generation for Numerical Computations', which was held in Verbania, Italy in July 2013. The previous editions of this Workshop were hosted by the Weierstrass Institute in Berlin (2005), by INRIA Rocquencourt in Paris (2007), and by Swansea University (2010).This book covers different, though related, aspects of the field: the generation of quality grids for complex three-dimensional geometries; parallel mesh generation algorithms; mesh adaptation, including both theoretical and implementation aspects; grid generation and adaptation on surfaces - all with an interesting mix of numerical analysis, computer science and strongly application-oriented problems.…

Zustand: New.

Zustand: New.

Zustand: NEW.

Taschenbuch. Zustand: Neu. New Challenges in Grid Generation and Adaptivity for Scientific Computing | Simona Perotto (u. a.) | Taschenbuch | SEMA SIMAI Springer Series | viii | Englisch | 2016 | Springer | EAN 9783319359267 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu. …

Paperback. Zustand: Brand New. reprint edition. 333 pages. 9.25x6.10x0.79 inches. In Stock.

Zustand: New. In English.

Zustand: New. In English.

Zustand: Sehr gut. Zustand: Sehr gut | Seiten: 336 | Sprache: Englisch | Produktart: Bücher | This volume collects selected contributions from the ¿Fourth Tetrahedron Workshop on Grid Generation for Numerical Computations¿, which was held in Verbania, Italy in July 2013. The previous editions of this Workshop were hosted by the Weierstrass Institute in Berlin (2005), by INRIA Rocquencourt in Paris (2007), and by Swansea University (2010).This book covers different, though related, aspects of the field: the generation of quality grids for complex three-dimensional geometries; parallel mesh generation algorithms; mesh adaptation, including both theoretical and implementation aspects; grid generation and adaptation on surfaces ¿ all with an interesting mix of numerical analysis, computer science and strongly application-oriented problems.…

Zustand: new.

Zustand: new.

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - This book includes selected contributions on applied mathematics, numerical analysis, numerical simulation and scientific computing related to fluid mechanics problems, presented at the FEF-'Finite Element for Flows' conference, held in Rome in spring 2017. Written by leading international experts and covering state-of-the-art topics in numerical simulation for flows, it provides fascinating insights into and perspectives on current and future methodological and numerical developments in computational science. As such, the book is a valuable resource for researchers, as well as Masters and Ph.D students. …

Buch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - This book includes selected contributions on applied mathematics, numerical analysis, numerical simulation and scientific computing related to fluid mechanics problems, presented at the FEF-'Finite Element for Flows' conference, held in Rome in spring 2017. Written by leading international experts and covering state-of-the-art topics in numerical simulation for flows, it provides fascinating insights into and perspectives on current and future methodological and numerical developments in computational science. As such, the book is a valuable resource for researchers, as well as Masters and Ph.D students. …

Zustand: New. In English.

Zustand: New. In English.

Paperback. Zustand: Brand New. 374 pages. 9.25x6.10x0.78 inches. In Stock.

Hardcover. Zustand: Brand New. 374 pages. 9.25x6.10x9.21 inches. In Stock.

Taschenbuch. Zustand: Neu. Numerical Methods for Flows | FEF 2017 Selected Contributions | Harald van Brummelen (u. a.) | Taschenbuch | Lecture Notes in Computational Science and Engineering | xii | Englisch | 2021 | Springer | EAN 9783030307073 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu.…

Zustand: New.

Kartoniert / Broschiert. Zustand: New.

Buch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - The developments in mesh generation are usually driven by the needs of new applications and/or novel algorithms. The last decade has seen a renewed interest in mesh generation and adaptation by the computational engineering community, due to the challenges introduced by complex industrial problems.Another common challenge is the need to handle complex geometries. Nowadays, it is becoming obvious that geometry should be persistent throughout the whole simulation process. Several methodologies that can carry the geometric information throughout the simulation stage are available, but due to the novelty of these methods, the generation of suitable meshes for these techniques is still the main obstacle for the industrial uptake of this technology.This book will cover different aspects of mesh generation and adaptation, with particular emphasis on cutting-edge mesh generation techniques for advanced discretisation methods and complex geometries.…

Taschenbuch. Zustand: Neu. Mesh Generation and Adaptation | Cutting-Edge Techniques | Rubén Sevilla (u. a.) | Taschenbuch | SEMA SIMAI Springer Series | x | Englisch | 2023 | Springer | EAN 9783030925420 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu. …

Zustand: Hervorragend. Zustand: Hervorragend | Seiten: 340 | Sprache: Englisch | Produktart: Bücher | The developments in mesh generation are usually driven by the needs of new applications and/or novel algorithms. The last decade has seen a renewed interest in mesh generation and adaptation by the computational engineering community, due to the challenges introduced by complex industrial problems.Another common challenge is the need to handle complex geometries. Nowadays, it is becoming obvious that geometry should be persistent throughout the whole simulation process. Several methodologies that can carry the geometric information throughout the simulation stage are available, but due to the novelty of these methods, the generation of suitable meshes for these techniques is still the main obstacle for the industrial uptake of this technology.This book will cover different aspects of mesh generation and adaptation, with particular emphasis on cutting-edge mesh generation techniques for advanced discretisation methods and complex geometries.…

Paperback. Zustand: Brand New. 340 pages. 9.25x6.10x0.71 inches. In Stock.

Hardcover. Zustand: Brand New. 250 pages. 9.25x6.10x9.49 inches. In Stock.

Buch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - This book presents up-to-date state of the art for industrial mathematics and covers emerging topics in computational sciences. Mathematical models and computational methods have gained an increasing importance in the simulation of real-world and industrial problems. The employment of such methodologies deeply changed the standard ways of conceiving daily industrial production and strategies for sustainable exploitation of modern cities. The goal pursued by this book is twofold. On the one hand, cases of successful interaction between mathematics and industry are presented. Special emphasis is devoted to the benefits provided by the transfer of knowledge in different fields of applications, including the social challenges of sustainable development. On the other hand, groundbreaking ideas and emerging technologies in computational science are discussed to foster cross-fertilization of academic solutions and real-world problems. Math to Product (M2P) is meant to establish a platform for proposal, discussion, and promotion of current and new trends in industry, sustainability, and innovation, with the goal of supporting creative and interdisciplinary thoughts. Scientific/technical areas covered include transfer of knowledge, innovation in design, computational science and engineering, industrial optimization processes, sustainable mobility, aerospace, automotive, nautical and naval engineering. Target audience is made up by grad students and researchers in the field.…