LAYTON, RICHARD A (24 Ergebnisse)

Zustand: Good. Former library book; may include library markings. Used book that is in clean, average condition without any missing pages.

Zustand: New. In.

Zustand: New. pp. 184.

Zustand: New. A case for teaching classes on world religion and the Bible in public schools Series: New Public Scholarship Series. Num Pages: 176 pages. BIC Classification: 1KBB; JNF; JNU; YQR. Category: (G) General (US: Trade). Dimension: 229 x 152 x 13. Weight in Grams: 272. . 2014. Paperback. . . . . Books ship from the US and Ireland.

Paperback. Zustand: Brand New. 184 pages. 9.00x6.00x0.50 inches. In Stock.

paperback. Zustand: Very Good.

paperback. Zustand: Good.

Zustand: New. In.

Hardcover. Zustand: As New. Unread, like new. Immediately dispatched from Germany.

Hardcover. Zustand: Sehr gut. XIII, 155 S.; Ill. Very good. Shrink wrapped. Sprache: Englisch Gewicht in Gramm: 580.

Zustand: New. In.

Zustand: New. In.

Zustand: New. In.

Zustand: New. In.

Zustand: Gut. Zustand: Gut | Sprache: Englisch | Produktart: Bücher.

Zustand: New. This is a practical introduction to MEMS for advanced undergraduate and graduate students. It describes sensors, actuators, and microfluidics, and their relationship with MEMS. The book has a tested pedagogical structure and an accessible writing style. Num Pages: 460 pages, 20 black & white tables, biography. BIC Classification: PHD; TGM; TJF; TJFC. Category: (G) General (US: Trade). Dimension: 235 x 155 x 24. Weight in Grams: 700. . 2014. Paperback. . . . . Books ship from the US and Ireland.

Taschenbuch. Zustand: Neu. Neuware -Introductory MEMS: Fabrication and Applications is a practical introduction to MEMS for advanced undergraduate and graduate students. Part I introduces the student to the most commonly used MEMS fabrication techniques as well as the MEMS devices produced using these techniques. Part II focuses on MEMS transducers: principles of operation, modeling from first principles, and a detailed look at commercialized MEMS devices, in addition to microfluidics. Multiple field-tested laboratory exercises are included, designed to facilitate student learning about the fundamentals of microfabrication processes. References, suggested reading, review questions, and homework problems are provided at the close of each chapter.Introductory MEMS: Fabrication and Applications is an excellent introduction to the subject, with a tested pedagogical structure and an accessible writing style suitable for students at an advanced undergraduate level across academic disciplines.Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg 460 pp. Englisch.

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - Introductory MEMS: Fabrication and Applications is a practical introduction to MEMS for advanced undergraduate and graduate students. Part I introduces the student to the most commonly used MEMS fabrication techniques as well as the MEMS devices produced using these techniques. Part II focuses on MEMS transducers: principles of operation, modeling from first principles, and a detailed look at commercialized MEMS devices, in addition to microfluidics. Multiple field-tested laboratory exercises are included, designed to facilitate student learning about the fundamentals of microfabrication processes. References, suggested reading, review questions, and homework problems are provided at the close of each chapter.Introductory MEMS: Fabrication and Applications is an excellent introduction to the subject, with a tested pedagogical structure and an accessible writing style suitable for students at an advanced undergraduate level across academic disciplines.

Buch. Zustand: Neu. Neuware -Mechanical engineering, an engineering discipline borne of the needs of the industrial revolution, is once again asked to do its substantial share in the call for industrial renewal. The general call is urgent as we face profound is sues of productivity and competitiveness that require engineering solutions, among others. The Mechanical Engineering Series features graduate texts and research monographs intended to address the need for information in contemporary areas of mechanical engineering. The series is conceived as a comprehensive one that covers a broad range of concentrations important to mechanical engineering graduate education and research. We are fortunate to have a distinguished roster of consult ing editors on the advisory board, each an expert in one of the areas of concentration. The names of the consulting editors are listed on the next page of this volume. The areas of concentration are applied mechanics, biomechanics, computational mechanics, dynamic systems and control, en ergetics, mechanics of materials, processing, thermal science, and tribology. Fred Leckie, our consulting editor for applied mechanics and I are pleased to present this volume in the Series: Principles of Analytical System Dy namics, by Richard A. Layton. The selection of this volume underscores again the interest of the Mechanical Engineering Series to provide our read ers with topical monographs as well as graduate texts in a wide variety of fields.Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg 176 pp. Englisch.

Buch. Zustand: Neu. Neuware -Introductory MEMS: Fabrication and Applications is a practical introduction to MEMS for advanced undergraduate and graduate students. Part I introduces the student to the most commonly used MEMS fabrication techniques as well as the MEMS devices produced using these techniques. Part II focuses on MEMS transducers: principles of operation, modeling from first principles, and a detailed look at commercialized MEMS devices, in addition to microfluidics. Multiple field-tested laboratory exercises are included, designed to facilitate student learning about the fundamentals of microfabrication processes. References, suggested reading, review questions, and homework problems are provided at the close of each chapter.Introductory MEMS: Fabrication and Applications is an excellent introduction to the subject, with a tested pedagogical structure and an accessible writing style suitable for students at an advanced undergraduate level across academic disciplines.Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg 460 pp. Englisch.

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - Mechanical engineering, an engineering discipline borne of the needs of the industrial revolution, is once again asked to do its substantial share in the call for industrial renewal. The general call is urgent as we face profound is sues of productivity and competitiveness that require engineering solutions, among others. The Mechanical Engineering Series features graduate texts and research monographs intended to address the need for information in contemporary areas of mechanical engineering. The series is conceived as a comprehensive one that covers a broad range of concentrations important to mechanical engineering graduate education and research. We are fortunate to have a distinguished roster of consult ing editors on the advisory board, each an expert in one of the areas of concentration. The names of the consulting editors are listed on the next page of this volume. The areas of concentration are applied mechanics, biomechanics, computational mechanics, dynamic systems and control, en ergetics, mechanics of materials, processing, thermal science, and tribology. Fred Leckie, our consulting editor for applied mechanics and I are pleased to present this volume in the Series: Principles of Analytical System Dy namics, by Richard A. Layton. The selection of this volume underscores again the interest of the Mechanical Engineering Series to provide our read ers with topical monographs as well as graduate texts in a wide variety of fields.

Buch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - Mechanical engineering, an engineering discipline borne of the needs of the industrial revolution, is once again asked to do its substantial share in the call for industrial renewal. The general call is urgent as we face profound is sues of productivity and competitiveness that require engineering solutions, among others. The Mechanical Engineering Series features graduate texts and research monographs intended to address the need for information in contemporary areas of mechanical engineering. The series is conceived as a comprehensive one that covers a broad range of concentrations important to mechanical engineering graduate education and research. We are fortunate to have a distinguished roster of consult ing editors on the advisory board, each an expert in one of the areas of concentration. The names of the consulting editors are listed on the next page of this volume. The areas of concentration are applied mechanics, biomechanics, computational mechanics, dynamic systems and control, en ergetics, mechanics of materials, processing, thermal science, and tribology. Fred Leckie, our consulting editor for applied mechanics and I are pleased to present this volume in the Series: Principles of Analytical System Dy namics, by Richard A. Layton. The selection of this volume underscores again the interest of the Mechanical Engineering Series to provide our read ers with topical monographs as well as graduate texts in a wide variety of fields.

Buch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - Introductory MEMS: Fabrication and Applications is a practical introduction to MEMS for advanced undergraduate and graduate students. Part I introduces the student to the most commonly used MEMS fabrication techniques as well as the MEMS devices produced using these techniques. Part II focuses on MEMS transducers: principles of operation, modeling from first principles, and a detailed look at commercialized MEMS devices, in addition to microfluidics. Multiple field-tested laboratory exercises are included, designed to facilitate student learning about the fundamentals of microfabrication processes. References, suggested reading, review questions, and homework problems are provided at the close of each chapter.Introductory MEMS: Fabrication and Applications is an excellent introduction to the subject, with a tested pedagogical structure and an accessible writing style suitable for students at an advanced undergraduate level across academic disciplines.

Cloth. Zustand: Very Good Indeed. Zustand des Schutzumschlags: Very Good. Not Stated (illustrator). First edition. A collection of nine charming volumes on pubs and inns across British history, with commentary on drinking customs through the ages. Nine volumes. This set contains: We Keep a Pub, 1955. Third impression. An amusing and informative book following a set of engaging characters whose lives intersect at the public-house. Illustrated throughout by Starke. Written by Tom Berkley. A Year at the Peacock, 1964. First edition. A record of the author's own experiences during his first year of owning a charming little inn called Peacock Inn. Illustrated throughout by Biro. Written by T. A. Layton. Tickner's Pub, 1965. First edition. A misguided guide to Britain's pubs, created after years of research in depth and swaths of empty kegs. Illustrated throughout. Written and illustrated by John Tickner. The Romance of Essex Inns, 1967. Third impression. An enjoyable work on the inns of Essex, both famous and infamous, with a history of each establishment. Illustrated with twenty plates. Collated complete. Written and illustrated by Glyn Morgan. Historic English Inns, 1972. First edition. A historic study of English inns from the monastic hospice, through the coaching age and beyond. Illustrated with sixteen plates. Collated complete. Written by A. W. Coysh. The English Country Inn, 1974. First edition. Capturing the essentials of the unique institution that is the English country inn, from Hertfordshire and Yorkshire to Devon and Kent. Illustrated with a frontispiece and twenty-two plates. Collated complete. Written by Garry Hogg. Beer and Skittles, 1976. First edition. An amble through the pubs and hop-gardens of Britain, containing histories, stories, and facts. Written by Richard Boston. Dr. Foster's Book of Beer, 1979. First edition. A book for the beer enthusiast, telling the story of what has happened to beer over the last few years. Illustrated throughout. Written by Terence Foster. Inns, Ales, and Drinking Customs of Old England, 1985. First edition. A historical study of some of England's most famous and characteristic institutions. Illustrated with a frontispiece and forty plates. Collated complete. Written by Frederick W. Hackwood with an introduction from Paul Jennings. In the original full cloth binding. Externally, smart with light rubbing to the extremities and the odd small mark to the boards. Fading to the cloth of We Keep a Pub. Original dust wrappers are price-clipped other than We Keep a Pub, A Year at the Peacock, and Inns, Ales, and Drinking Customs of Old England, which remain unclipped. Wrappers are also smart with light wear and chipping to the extremities. Light fading to the spines with the odd small mark. Small closed tears to the panel edges of the odd volume. Internally, firmly bound. Pages are very bright with the odd small spot. Minor age toning to the endpapers. Very Good Indeed. book.