Gesamtpreis (1 Artikel Artikel):
Versandziel:
sdc publications (Mehr als 2.900 Ergebnisse)
Direkt zu den wichtigsten Suchergebnissen
Suchfilter
Produktart
- Alle Product Types
- Bücher (2.958)
- Magazine & Zeitschriften (Keine weiteren Ergebnisse entsprechen dieser Verfeinerung)
- Comics (Keine weiteren Ergebnisse entsprechen dieser Verfeinerung)
- Noten (Keine weiteren Ergebnisse entsprechen dieser Verfeinerung)
- Kunst, Grafik & Poster (Keine weiteren Ergebnisse entsprechen dieser Verfeinerung)
- Fotografien (Keine weiteren Ergebnisse entsprechen dieser Verfeinerung)
- Karten (Keine weiteren Ergebnisse entsprechen dieser Verfeinerung)
- Manuskripte & Papierantiquitäten (Keine weiteren Ergebnisse entsprechen dieser Verfeinerung)
Zustand Mehr dazu
Einband
- alle Einbände
- Hardcover (Keine weiteren Ergebnisse entsprechen dieser Verfeinerung)
- Softcover (2.956)
Weitere Eigenschaften
- Erstausgabe (Keine weiteren Ergebnisse entsprechen dieser Verfeinerung)
- Signiert (Keine weiteren Ergebnisse entsprechen dieser Verfeinerung)
- Schutzumschlag (Keine weiteren Ergebnisse entsprechen dieser Verfeinerung)
- Angebotsfoto (954)
Sprache (2)
Gratisversand
Land des Verkäufers
Verkäuferbewertung
-
Creo Parametric 2.0 Tutorial
Sprache: Englisch
Verlag: SDC Publications (edition 1), 2013
ISBN 10: 1585038156 ISBN 13: 9781585038152
Paperback. Zustand: Fair. 1. Supplements included. The item might be beaten up but readable. May contain markings or highlighting, as well as stains, bent corners, or any other major defect, but the text is not obscured in any way.
-
Creo Parametric 5.0 Tutorial
Sprache: Englisch
Verlag: SDC Publications (edition 1), 2018
ISBN 10: 1630572071 ISBN 13: 9781630572075
Paperback. Zustand: Very Good. 1. It's a well-cared-for item that has seen limited use. The item may show minor signs of wear. All the text is legible, with all pages included. It may have slight markings and/or highlighting.
-
Creo Parametric 5.0 Tutorial
Sprache: Englisch
Verlag: SDC Publications (edition 1), 2018
ISBN 10: 1630572071 ISBN 13: 9781630572075
Paperback. Zustand: New. 1. The item is brand new, never used or read. It's in perfect condition and may include supplements and/or access codes or come shrink-wrapped.
-
Introduction to Finite Element Analysis Using SOLIDWORKS Simulation 2018
Sprache: Englisch
Verlag: SDC Publications (edition 1), 2018
ISBN 10: 1630571555 ISBN 13: 9781630571559
Paperback. Zustand: Very Good. 1. It's a well-cared-for item that has seen limited use. The item may show minor signs of wear. All the text is legible, with all pages included. It may have slight markings and/or highlighting.
-
Introduction to Finite Element Analysis Using SOLIDWORKS Simulation 2018
Sprache: Englisch
Verlag: SDC Publications (edition 1), 2018
ISBN 10: 1630571555 ISBN 13: 9781630571559
Paperback. Zustand: New. 1. The item is brand new, never used or read. It's in perfect condition and may include supplements and/or access codes or come shrink-wrapped.
-
Autodesk Inventor 2020 and Engineering Graphics
Sprache: Englisch
Verlag: SDC Publications (edition 1), 2019
ISBN 10: 1630572837 ISBN 13: 9781630572839
Paperback. Zustand: Very Good. 1. It's a well-cared-for item that has seen limited use. The item may show minor signs of wear. All the text is legible, with all pages included. It may have slight markings and/or highlighting.
-
AutoCAD 2016 Tutorial First Level 2D Fundamentals
Anbieter: ThriftBooks-Atlanta, AUSTELL, GA, USA
Verkäuferbewertung 5 von 5 Sternen
Paperback. Zustand: Good. No Jacket. Pages can have notes/highlighting. Spine may show signs of wear. ~ ThriftBooks: Read More, Spend Less.
-
Tutorial Guide to AutoCAD 2020
Sprache: Englisch
Verlag: SDC Publications (Schroff Development Corpora, 2019
ISBN 10: 1630572764 ISBN 13: 9781630572761
Anbieter: ThriftBooks-Dallas, Dallas, TX, USA
Verkäuferbewertung 5 von 5 Sternen
Paperback. Zustand: Good. No Jacket. Former library book; Pages can have notes/highlighting. Spine may show signs of wear. ~ ThriftBooks: Read More, Spend Less.
-
Tutorial Guide to AutoCAD 2020
Sprache: Englisch
Verlag: SDC Publications (Schroff Development Corpora, 2019
ISBN 10: 1630572764 ISBN 13: 9781630572761
Anbieter: ThriftBooks-Dallas, Dallas, TX, USA
Verkäuferbewertung 5 von 5 Sternen
Paperback. Zustand: Good. No Jacket. Pages can have notes/highlighting. Spine may show signs of wear. ~ ThriftBooks: Read More, Spend Less.
-
Microsoft Office Specialist Excel Associate 365 â" 2019 Exam Preparation
Sprache: Englisch
Verlag: SDC Publications (edition 1), 2020
ISBN 10: 1630573329 ISBN 13: 9781630573324
Paperback. Zustand: As New. 1. It's a preowned item in almost perfect condition. It has no visible cosmetic imperfections. May come without any shrink wrap; pages are clean and not marred by notes or folds of any kind.
-
Tutorial Guide to AutoCAD 2019
Sprache: Englisch
Verlag: SDC Publications (Schroff Development Corpora, 2018
ISBN 10: 1630571857 ISBN 13: 9781630571856
Anbieter: ThriftBooks-Atlanta, AUSTELL, GA, USA
Verkäuferbewertung 5 von 5 Sternen
Paperback. Zustand: Very Good. No Jacket. May have limited writing in cover pages. Pages are unmarked. ~ ThriftBooks: Read More, Spend Less.
-
Parametric Modeling with Autodesk Inventor 2017
Sprache: Englisch
Verlag: SDC Publications (edition 1), 2016
ISBN 10: 1630570303 ISBN 13: 9781630570309
Paperback. Zustand: Good. 1. It's a preowned item in good condition and includes all the pages. It may have some general signs of wear and tear, such as markings, highlighting, slight damage to the cover, minimal wear to the binding, etc., but they will not affect the overall reading experience.
-
Technical Drawing 101 with AutoCAD 2017 (Including unique access code)
Sprache: Englisch
Verlag: SDC Publications (edition 1), 2016
ISBN 10: 1630570419 ISBN 13: 9781630570415
Paperback. Zustand: Good. 1. It's a preowned item in good condition and includes all the pages. It may have some general signs of wear and tear, such as markings, highlighting, slight damage to the cover, minimal wear to the binding, etc., but they will not affect the overall reading experience.
-
Beginner's Guide to SolidWorks 2010
Anbieter: Better World Books, Mishawaka, IN, USA
Verkäuferbewertung 5 von 5 Sternen
Zustand: Good. Pages intact with minimal writing/highlighting. The binding may be loose and creased. Dust jackets/supplements are not included. Stock photo provided. Product includes identifying sticker. Better World Books: Buy Books. Do Good.
-
Beginner's Guide to SolidWorks 2010
Anbieter: Better World Books, Mishawaka, IN, USA
Verkäuferbewertung 5 von 5 Sternen
Zustand: Very Good. Former library copy. Pages intact with possible writing/highlighting. Binding strong with minor wear. Dust jackets/supplements may not be included. Includes library markings. Stock photo provided. Product includes identifying sticker. Better World Books: Buy Books. Do Good.
-
Parametric Modeling with Autodesk Inventor 2015
Anbieter: ThriftBooks-Dallas, Dallas, TX, USA
Verkäuferbewertung 5 von 5 Sternen
Paperback. Zustand: Good. No Jacket. Pages can have notes/highlighting. Spine may show signs of wear. ~ ThriftBooks: Read More, Spend Less.
-
Parametric Modeling with Creo Parametric 1.0
Anbieter: ThriftBooks-Atlanta, AUSTELL, GA, USA
Verkäuferbewertung 5 von 5 Sternen
Unknown. Zustand: Good. No Jacket. Pages can have notes/highlighting. Spine may show signs of wear. ~ ThriftBooks: Read More, Spend Less.
-
SOLIDWORKS 2017 Basic Tools
Sprache: Englisch
Verlag: SDC Publications (edition 1), 2016
ISBN 10: 1630570583 ISBN 13: 9781630570583
Paperback. Zustand: Good. 1. It's a preowned item in good condition and includes all the pages. It may have some general signs of wear and tear, such as markings, highlighting, slight damage to the cover, minimal wear to the binding, etc., but they will not affect the overall reading experience.
-
Pro/Engineer Wildfire 3. 0 Tutorial and MultiMedia CD
Anbieter: Better World Books, Mishawaka, IN, USA
Verkäuferbewertung 5 von 5 Sternen
Zustand: Very Good. Pap/Com. Former library copy. Pages intact with possible writing/highlighting. Binding strong with minor wear. Dust jackets/supplements may not be included. Includes library markings. Stock photo provided. Product includes identifying sticker. Better World Books: Buy Books. Do Good.
-
Parametric Modeling with SolidWorks 2011
Anbieter: ThriftBooks-Dallas, Dallas, TX, USA
Verkäuferbewertung 5 von 5 Sternen
Unknown. Zustand: Very Good. No Jacket. May have limited writing in cover pages. Pages are unmarked. ~ ThriftBooks: Read More, Spend Less 2.55.
-
Technical Drawing 101 with AutoCAD 2019
Sprache: Englisch
Verlag: SDC Publications (Schroff Development Corpora, 2018
ISBN 10: 1630572012 ISBN 13: 9781630572013
Anbieter: ThriftBooks-Atlanta, AUSTELL, GA, USA
Verkäuferbewertung 5 von 5 Sternen
Paperback. Zustand: Fair. No Jacket. Readable copy. Pages may have considerable notes/highlighting. ~ ThriftBooks: Read More, Spend Less.
-
Parametric Modeling with Creo Parametric 1.0
Anbieter: Wonder Book, Frederick, MD, USA
Verkäuferbewertung 5 von 5 Sternen
Zustand: Good. .
-
Design Workbook Using Solidworks 2020
Sprache: Englisch
Verlag: SDC Publications (Schroff Development Corpora, 2020
ISBN 10: 1630573043 ISBN 13: 9781630573041
Anbieter: ThriftBooks-Dallas, Dallas, TX, USA
Verkäuferbewertung 5 von 5 Sternen
Paperback. Zustand: Very Good. No Jacket. May have limited writing in cover pages. Pages are unmarked. ~ ThriftBooks: Read More, Spend Less.
-
Creo Parametric 2.0 Tutorial
Anbieter: ThriftBooks-Dallas, Dallas, TX, USA
Verkäuferbewertung 5 von 5 Sternen
Paperback. Zustand: Very Good. No Jacket. May have limited writing in cover pages. Pages are unmarked. ~ ThriftBooks: Read More, Spend Less.
-
Creo Parametric 5.0 Tutorial
Sprache: Englisch
Verlag: SDC Publications (Schroff Development Corpora, 2018
ISBN 10: 1630572071 ISBN 13: 9781630572075
Anbieter: ThriftBooks-Dallas, Dallas, TX, USA
Verkäuferbewertung 5 von 5 Sternen
Paperback. Zustand: Very Good. No Jacket. May have limited writing in cover pages. Pages are unmarked. ~ ThriftBooks: Read More, Spend Less.
-
An Engineer's Introduction to Programming with MATLAB 2017
Sprache: Englisch
Verlag: SDC Publications (edition 1), 2017
ISBN 10: 1630571253 ISBN 13: 9781630571252
Paperback. Zustand: Good. 1. It's a preowned item in good condition and includes all the pages. It may have some general signs of wear and tear, such as markings, highlighting, slight damage to the cover, minimal wear to the binding, etc., but they will not affect the overall reading experience.
-
Designing with Creo Parametric 5.0
Sprache: Englisch
Verlag: SDC Publications (edition 1), 2018
ISBN 10: 1630572098 ISBN 13: 9781630572099
Paperback. Zustand: Very Good. 1. It's a well-cared-for item that has seen limited use. The item may show minor signs of wear. All the text is legible, with all pages included. It may have slight markings and/or highlighting.
-
AutoCAD 2014 Tutorial - First Level : 2D Fundamentals
Anbieter: Better World Books, Mishawaka, IN, USA
Verkäuferbewertung 5 von 5 Sternen
Zustand: Good. Pages intact with minimal writing/highlighting. The binding may be loose and creased. Dust jackets/supplements are not included. Stock photo provided. Product includes identifying sticker. Better World Books: Buy Books. Do Good.
-
Parametric Modeling with Creo Parametric 1.0
Anbieter: Wonder Book, Frederick, MD, USA
Verkäuferbewertung 5 von 5 Sternen
Zustand: Good. Good condition. Paperback edition. A copy that has been read but remains intact. May contain markings such as bookplates, stamps, limited notes and highlighting, or a few light stains.
-
Introduction to Finite Element Analysis Using Solidworks Simulation 2018
Sprache: Englisch
Verlag: SDC Publications (Schroff Development Corpora, 2018
ISBN 10: 1630571555 ISBN 13: 9781630571559
Anbieter: ThriftBooks-Atlanta, AUSTELL, GA, USA
Verkäuferbewertung 5 von 5 Sternen
Paperback. Zustand: Fair. No Jacket. Readable copy. Pages may have considerable notes/highlighting. ~ ThriftBooks: Read More, Spend Less.
