system modeling optimization proceedings (26 Ergebnisse)

Hardcover/Pappeinband. Zustand: Sehr gut. XVI, 306 S. Very good. Shrink wrapped. / Sehr guter Zustand. In Folie verschweißt. Sprache: Englisch Gewicht in Gramm: 780.

Paperback. Zustand: Brand New. 2011 edition. 363 pages. 9.00x6.00x0.75 inches. In Stock.

Paperback. Zustand: Brand New. 1st edition. 462 pages. 9.00x6.00x0.75 inches. In Stock.

Paperback. Zustand: Brand New. 1st edition. 583 pages. 9.20x6.70x1.40 inches. In Stock.

Paperback. Zustand: Brand New. 1982 edition. 893 pages. 9.61x6.69x1.80 inches. In Stock.

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - th Welcome to the proceedings of PATMOS 2007, the 17 in a series of international workshops. PATMOS 2007 was organized by Chalmers University of Technology with IEEE Sweden Chapter of the Solid-State Circuit Society technical - sponsorship and IEEE CEDA sponsorship. Over the years, PATMOS has evolved into an important European event, where - searchers from both industry and academia discuss and investigate the emerging ch- lenges in future and contemporary applications, design methodologies, and tools - quired for the development of the upcoming generations of integrated circuits and systems. The technical program of PATMOS 2007 consisted of state-of-the-art te- nical contributions, three invited talks and an industrial session on design challenges in real-life projects. The technical program focused on timing, performance and power consumption, as well as architectural aspects with particular emphasis on m- eling, design, characterization, analysis and optimization in the nanometer era. The Technical Program Committee, with the assistance of additional expert - viewers, selected the 55 papers presented at PATMOS. The papers were organized into 9 technical sessions and 3 poster sessions. As is always the case with the PATMOS workshops, full papers were required, and several reviews were received per manuscript.

Taschenbuch. Zustand: Neu. System Modeling and Optimization | Proceedings of the 10th IFIP Conference New York City, USA, August 31-September 4,1981 | R. F. Drenick (u. a.) | Taschenbuch | xi | Englisch | 1982 | Springer | EAN 9783540116912 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu.

Taschenbuch. Zustand: Neu. Integrated Circuit and System Design. Power and Timing Modeling, Optimization and Simulation | 17th International Workshop, PATMOS 2007, Gothenburg, Sweden, September 3-5, 2007, Proceedings | Nadine Azemard (u. a.) | Taschenbuch | Einband - flex.(Paperback) | Englisch | 2007 | Springer | EAN 9783540744412 | Verantwortliche Person für die EU: Springer Nature Customer Service Center GmbH, Europaplatz 3, 69115 Heidelberg, productsafety[at]springernature[dot]com | Anbieter: preigu.

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - Computational problems in magnetic fusion research.- A simple model of a capital stock in equilibrium with the technology and the preferences.- Some numerical problems arising from linear systems.- Optimal shape design for elliptic systems.- Urban systems analysis and urban policy.- On the treatment of chronic forms of a disease according to a mathematical model.- The applicability of the Hamilton-Jacobi verification technique.- Stationary deterministic flows in discrete systems : I.- Recent trends of the optimal control for stochastic distributed parameter systems.- Models in the policy process: Past, present, and future.- A ritz-type approach to the calculation of optimal control for nonlinear, dynamic systems.- On lower closure and lower semicontinuity in the existence theory for optimal control.- A discrete maximum principle concerning the optimal cost of deterministic control problems.- On the computational complexity of clustering and related problems.- The application of vector minimisation techniques in the analysis of multiloop nonlinear feedback systems.- Singular steady state LQG problems: Estimation and optimization.- On a general method for solving time-optimal linear control problems.- Periodic solutions of discrete matrix Riccati equations with constant coefficient matrices.- A new scheme for discrete implicit observer and controller.- Reachable sets and generalized bang-bang principle for linear control systems.- Periodicity in optimal control and differential games.- Reduced approximations in parameter identification of hereditary systems.- The smoothing problem - a state space recursive computational approach: Applications to econometric time series with trends and seasonalities.- On observability and unbiased estimation of nonlinear systems.- Anaccelerated experimental design algorithm.- A robustized maximum entropy approach to system identification.- A problem of bilinear control in nonlinear coupled distributed parameter reactor systems.- Optimum maneuvers of a supercruiser.- Application of constrained constant optimal output feedback to modern flight control synthesis.- Advanced control laws for experiments in fast rollout and turnoff of the B737-100 aircraft.- Numerical simulation of an alloy solidification problem.- The threshold problem for a FitzHugh-Nagumo system.- Optimal design of a thermal diffuser with minimum weight.- Differential inclusions with multivalued boundary conditions.- On the optimal value function of optimization problems.- Finite element approximation of time optimal control problems for parabolic equations with Dirichelt boundary conditions.- Dirichlet boundary control problems for parabolic equations with quadratic cost: Analyticity and riccati's feedback synthesis.- Optimization in banach spaces of systems involving convex processes.- A decomposition algorithm for a second order elliptic operator using asymptotic expansions.- On the semi group approach for ergodic problems of optimal stopping.- The principal eigenvalue of a transport operator - an asymptotic expansion.- Shape sensitivity analysis for variational inequalities.- A cautious time-optimal control algorithm for stochastic control systems with additional boundary constraints.- On linear-quadratic-Gaussian control of systems with uncertain statistics.- A liapunov-like criterion and a first passage-time problems in non-linear stochastic systems.- Stability analtsis for large scale stochastic systems.- Algorithms for some simple infinite dimensional linear programs.- Entropy optimization via entropy projections.-Resolution of a quadratic combinatorial problem by dynamic programming.- The structure and computation of solutions to continuous linear programs.- The Bayesian approach to global optimization.- An optimization model for energy saving in the heating of buildings.- An optimal dispatching strategy for vehicles in a transportation system.- Asynchronous parallel search in global optimization problems.- A class of m.

Taschenbuch. Zustand: Neu. Neuware - This book constitutes the refereed proceedings of the 21st International Conference on Integrated Circuit and System Design, PATMOS 2011, held in Madrid, Spain, in September 2011. The 34 revised full papers presented were carefully reviewed and selected from numerous submissions. The paper feature emerging challenges in methodologies and tools for the design of upcoming generations of integrated circuits and systems and focus especially on timing, performance and power consumption as well as architectural aspects with particular emphasis on modeling, design, characterization, analysis and optimization.

Paperback. Zustand: Brand New. 300 pages. 9.00x6.00x0.71 inches. In Stock.

Taschenbuch. Zustand: Neu. System Modeling and Optimization | Proceedings of the 21st IFIP TC7 Conference held in July 21st - 25th, 2003, Sophia Antipolis, France | John Cagnol (u. a.) | Taschenbuch | xv | Englisch | 2010 | Springer | EAN 9781441954336 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu.

Taschenbuch. Zustand: Neu. Integrated Circuit and System Design. Power and Timing Modeling, Optimization and Simulation | 15th International Workshop, PATMOS 2005, Leuven, Belgium, September 21-23, 2005, Proceedings | Vassilis Paliouras (u. a.) | Taschenbuch | Einband - flex.(Paperback) | Englisch | 2005 | Springer | EAN 9783540290131 | Verantwortliche Person für die EU: Springer Nature Customer Service Center GmbH, Europaplatz 3, 69115 Heidelberg, productsafety[at]springernature[dot]com | Anbieter: preigu.

Taschenbuch. Zustand: Neu. System Modeling and Optimization | Proceedings of the 22nd IFIP TC7 Conference held from , July 18-22, 2005, Turin, Italy | F. Ceragioli (u. a.) | Taschenbuch | xii | Englisch | 2010 | Springer | EAN 9781441941039 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu.

Taschenbuch. Zustand: Neu. Integrated Circuit and System Design. Power and Timing Modeling, Optimization and Simulation | 13th International Workshop, PATMOS 2003, Torino, Italy, September 10-12, 2003, Proceedings | Jorge Juan Chico (u. a.) | Taschenbuch | Einband - flex.(Paperback) | Englisch | 2003 | Springer | EAN 9783540200741 | Verantwortliche Person für die EU: Springer-Verlag KG, Sachsenplatz 4-6, 1201 WIEN, ÖSTERREICH, productsafety[at]springernature[dot]com | Anbieter: preigu.

Paperback. Zustand: Brand New. 1st edition. 677 pages. 9.20x6.10x0.90 inches. In Stock.

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - Welcome to the proceedings of PATMOS 2003. This was the 13th in a series of international workshops held in several locations in Europe. Over the years, PATMOS has gained recognition as one of the major European events devoted to power and timing aspects of integrated circuit and system design. Despite its signi cant growth and development, PATMOS can still be considered as a very informal forum, featuring high-level scienti c presentations together with open discussions and panel sessions in a free and relaxed environment. This year, PATMOS took place in Turin, Italy, organized by the Politecnico di Torino, with technical co-sponsorship from the IEEE Circuits and Systems Society and the generous support of the European Commission, as well as that of several industrial sponsors, including BullDAST, Cadence, Mentor Graphics, STMicroelectronics, and Synopsys. The objective of the PATMOS workshop is to provide a forum to discuss and investigate the emerging problems in methodologies and tools for the design of new generations of integrated circuits and systems. A major emphasis of the technical program is on speed and low-power aspects, with particular regard to modeling, characterization, design, and architectures.

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - Welcome to the proceedings of PATMOS 2005, the 15th in a series of international workshops.PATMOS2005wasorganizedbyIMECwithtechnicalco-sponsorshipfrom the IEEE Circuits and Systems Society. Over the years, PATMOS has evolved into an important European event, where - searchers from both industry and academia discuss and investigate the emerging ch- lenges in future and contemporary applications, design methodologies, and tools - quired for the developmentof upcominggenerationsof integrated circuits and systems. The technical program of PATMOS 2005 contained state-of-the-art technical contri- tions, three invited talks, a special session on hearing-aid design, and an embedded - torial. The technical program focused on timing, performance and power consumption, as well as architectural aspects with particular emphasis on modeling, design, char- terization, analysis and optimization in the nanometer era. The Technical Program Committee, with the assistance of additional expert revi- ers, selected the 74 papers to be presented at PATMOS. The papers were divided into 11 technical sessions and 3 poster sessions. As is always the case with the PATMOS workshops, the review process was anonymous, full papers were required, and several reviews were carried out per paper. Beyond the presentations of the papers, the PATMOS technical program was - riched by a series of speeches offered by world class experts, on important emerging research issues of industrial relevance. Prof. Jan Rabaey, Berkeley, USA, gave a talk on 'Traveling the Wild Frontier of Ulta Low-Power Design', Dr. Sung Bae Park, S- sung, gave a presentation on 'DVL (Deep Low Voltage): Circuits and Devices', Prof.

Zustand: New. Presents the most current research in system modeling and optimizationThis book presents selected proceedings from the 22nd biennial IFIP conference on System Modeling and Optimization, held in Turin, Italy in July of 2005. This edition of the confer.

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - We publish in this volume the plenary talks and a selection of the papers on numerics, optimization and their applications, presented at the 22nd Conference on System Modeling and Optimization, held at the Politecnico di Torino in July 2005. The conference has been organized by the Mathematical Department of the Politecnico di Torino. IFIP is a multinational federation of professional and technical organi- tions concerned with information processes. It was established in 1959 under the auspices of UNESCO. IFIP still mantains friendly connections with s- cialized agencies of the UN systems. It consists of Technical Committees. The Seventh Technical Committee, established in 1972, was created in 1968 by A.V. Balakrishnan, J.L. Lions and G.I. Marchuk with a joint conference held in Sanremo and Novosibirsk. The present edition of the conference is dedicated to Camillo Possio, lulled by a bomb during the last air raid over Torino, in the sixtieth anniversary of his death. The special session 'On the Possio equation and its special role in aeroelasticity' was devoted to his achievements. The special session 'Shape Analysis and optimization' commemorates the 100th anniversary of Pompeiu thesis.

Zustand: Sehr gut. Zustand: Sehr gut | Seiten: 324 | Sprache: Englisch | Produktart: Bücher | System Modeling and Optimization is an indispensable reference for anyone interested in the recent advances in these two disciplines. The book collects, for the first time, selected articles from the 21st and most recent IFIP TC 7 conference in Sophia Antipolis, France. Applied mathematicians and computer scientists can attest to the ever-growing influence of these two subjects. The practical applications of system modeling and optimization can be seen in a number of fields: environmental science, transport and telecommunications, image analysis, free boundary problems, bioscience, and non-cylindrical evolution control, to name just a few.New developments in each of these fields have contributed to a more complex understanding of both system modeling and optimization. Editors John Cagnol and Jean-Paul Zolésio, chairs of the conference, have assembled System Modeling and Optimization to present the most up-to-date developments to professionals and academics alike.

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - System Modeling and Optimization is an indispensable reference for anyone interested in the recent advances in these two disciplines. The book collects, for the first time, selected articles from the 21st and most recent IFIP TC 7 conference in Sophia Antipolis, France. Applied mathematicians and computer scientists can attest to the ever-growing influence of these two subjects. The practical applications of system modeling and optimization can be seen in a number of fields: environmental science, transport and telecommunications, image analysis, free boundary problems, bioscience, and non-cylindrical evolution control, to name just a few.New developments in each of these fields have contributed to a more complex understanding of both system modeling and optimization. Editors John Cagnol and Jean-Paul Zolésio, chairs of the conference, have assembled System Modeling and Optimization to present the most up-to-date developments to professionals and academics alike.

Taschenbuch. Zustand: Neu. Neuware - Welcome to the proceedings of PATMOS 2006, the 16th in a series of international workshops. PATMOS 2006 was organized by LIRMM with CAS technical - sponsorship and CEDA sponsorship. Over the years, the PATMOS workshop has evolved into an important European event, where researchers from both industry and academia discuss and investigate the emerging challenges in future and contemporary applications, design methodologies, and tools required for the development of upcoming generations of integrated circuits and systems. The technical program of PATMOS 2006 contained state-of-the-art technical contributions, three invited talks, a special session on hearing-aid design, and an embedded tutorial. The technical program focused on timing, performance and power consumption, as well as architectural aspects with particular emphasis on modeling, design, characterization, analysis and optimization in the nanometer era. The Technical Program Committee, with the assistance of additional expert reviewers, selected the 64 papers presented at PATMOS. The papers were organized into 11 technical sessions and 3 poster sessions. As is always the case with the PATMOS workshops, full papers were required, and several reviews were received per manuscript.

Buch. Zustand: Neu. Neuware - We publish in this volume the plenary talks and a selection of the papers on numerics, optimization and their applications, presented at the 22nd Conference on System Modeling and Optimization, held at the Politecnico di Torino in July 2005. The conference has been organized by the Mathematical Department of the Politecnico di Torino. IFIP is a multinational federation of professional and technical organi- tions concerned with information processes. It was established in 1959 under the auspices of UNESCO. IFIP still mantains friendly connections with s- cialized agencies of the UN systems. It consists of Technical Committees. The Seventh Technical Committee, established in 1972, was created in 1968 by A.V. Balakrishnan, J.L. Lions and G.I. Marchuk with a joint conference held in Sanremo and Novosibirsk. The present edition of the conference is dedicated to Camillo Possio, lulled by a bomb during the last air raid over Torino, in the sixtieth anniversary of his death. The special session 'On the Possio equation and its special role in aeroelasticity' was devoted to his achievements. The special session 'Shape Analysis and optimization' commemorates the 100th anniversary of Pompeiu thesis.

Buch. Zustand: Neu. Neuware - System Modeling and Optimization is an indispensable reference for anyone interested in the recent advances in these two disciplines. The book collects, for the first time, selected articles from the 21st and most recent IFIP TC 7 conference in Sophia Antipolis, France. Applied mathematicians and computer scientists can attest to the ever-growing influence of these two subjects. The practical applications of system modeling and optimization can be seen in a number of fields: environmental science, transport and telecommunications, image analysis, free boundary problems, bioscience, and non-cylindrical evolution control, to name just a few.New developments in each of these fields have contributed to a more complex understanding of both system modeling and optimization. Editors John Cagnol and Jean-Paul Zolésio, chairs of the conference, have assembled System Modeling and Optimization to present the most up-to-date developments to professionals and academics alike.

Taschenbuch. Zustand: Neu. Neuware - WelcometotheproceedingsofPATMOS2004,thefourteenthinaseriesofint- national workshops. PATMOS 2004 was organized by the University of Patras with technical co-sponsorship from the IEEE Circuits and Systems Society. Over the years, the PATMOS meeting has evolved into an important - ropean event, where industry and academia meet to discuss power and timing aspects in modern integrated circuit and system design. PATMOS provides a forum for researchers to discuss and investigate the emerging challenges in - sign methodologies and tools required to develop the upcoming generations of integrated circuits and systems. We realized this vision this year by providing a technical program that contained state-of-the-art technical contributions, a keynote speech, three invited talks and two embedded tutorials. The technical program focused on timing, performance and power consumption, as well as architectural aspects, with particular emphasis on modelling, design, charac- rization, analysis and optimization in the nanometer era. This year a record 152 contributions were received to be considered for p- sible presentation at PATMOS. Despite the choice for an intense three-day m- ting, only 51 lecture papers and 34 poster papers could be accommodated in the single-track technical program. The Technical Program Committee, with the - sistance of additional expert reviewers, selected the 85 papers to be presented at PATMOS and organized them into 13 technical sessions. As was the case with the PATMOS workshops, the review process was anonymous, full papers were required, and several reviews were received per manuscript.