distributed parallel embedded systems (30 Ergebnisse)

Zustand: Good. This is an ex-library book and may have the usual library/used-book markings inside.This book has hardback covers. Clean from markings. In good all round condition. No dust jacket. Please note the Image in this listing is a stock photo and may not match the covers of the actual item,850grams, ISBN:9781119086413.

Gebundene Ausgabe. Zustand: Sehr gut. Gebraucht - Sehr gut - ungelesen, mit leichten Mängeln an Schnitt oder Umschlag durch Lager- oder Transportschaden, Mängelexemplar -This year, the IFIP Working Conference on Distributed and Parallel Embedded Sys tems (DIPES 2008) is held as part of the IFIP World Computer Congress, held in Milan on September 7 10, 2008. The embedded systems world has a great deal of experience with parallel and distributed computing. Many embedded computing systems require the high performance that can be delivered by parallel computing. Parallel and distributed computing are often the only ways to deliver adequate real time performance at low power levels. This year's conference attracted 30 submissions, of which 21 were accepted. Prof. Jor ¿ g Henkel of the University of Karlsruhe graciously contributed a keynote address on embedded computing and reliability. We would like to thank all of the program committee members for their diligence. Wayne Wolf, Bernd Kleinjohann, and Lisa Kleinjohann Acknowledgements We would like to thank all people involved in the organization of the IFIP World Computer Congress 2008, especially the IPC Co Chairs Judith Bishop and Ivo De Lotto, the Organization Chair Giulio Occhini, as well as the Publications Chair John Impagliazzo. Further thanks go to the authors for their valuable contributions to DIPES 2008. Last but not least we would like to acknowledge the considerable amount of work and enthusiasm spent by our colleague Claudius Stern in preparing theproceedingsofDIPES2008. Hemadeitpossibletoproducethemintheircurrent professional and homogeneous style.Libri GmbH, Europaallee 1, 36244 Bad Hersfeld 226 pp. Englisch.

Paperback. Zustand: Brand New. 338 pages. 9.25x6.10x0.77 inches. In Stock.

Zustand: New. pp. 400.

Zustand: Sehr gut. Zustand: Sehr gut | Sprache: Englisch | Produktart: Bücher | International Federation for Information ProcessingThe IFIP series publishes state-of-the-art results in the sciences and technologies of information and communication. The scope of the series includes: foundations of computer science; software theory and practice; education; computer applications in technology; communication systems; systems modeling and optimization; information systems; computers and society; computer systems technology; security and protection in information processing systems; artificial intelligence; and human-computer interaction. Proceedings and post-proceedings of refereed international conferences in computer science and interdisciplinary fields are featured. These results often precede journal publication and represent the most current research. The principal aim of the IFIP series is to encourage education and the dissemination and exchange of information about all aspects of computing.For more information about the 300 other books in the IFIP series, please visit www.springer.com.For more information about IFIP, please visit www.ifip.org. 

Taschenbuch. Zustand: Neu. Design Methods and Applications for Distributed Embedded Systems | IFIP 18th World Computer Congress, TC10 Working Conference on Distributed and Parallel, Embedded Systems (DIPES 2004), 22-27 August, 2004 Toulouse, France | Bernd Kleinjohann (u. a.) | Taschenbuch | xii | Englisch | 2013 | Springer | EAN 9781475780123 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu.

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - The IFIP TC-10 Working Conference on Distributed and Parallel Embedded Systems (DIPES 2004) brings together experts from industry and academia to discuss recent developments in this important and growing field in the splendid city of Toulouse, France. The ever decreasing price/performance ratio of microcontrollers makes it economically attractive to replace more and more conventional mechanical or electronic control systems within many products by embedded real-time computer systems. An embedded real-time computer system is always part of a well-specified larger system, which we call an intelligent product. Although most intelligent products start out as stand-alone units, many of them are required to interact with other systems at a later stage. At present, many industries are in the middle of this transition from stand-alone products to networked embedded systems. This transition requires reflection and architecting: The complexity of the evolving distributed artifact can only be controlled, if careful planning and principled design methods replace the - hoc engineering of the first version of many standalone embedded products.

Paperback. Zustand: Brand New. 228 pages. 9.00x6.00x0.55 inches. In Stock.

Paperback. Zustand: Brand New. 274 pages. 9.00x6.00x0.65 inches. In Stock.

Taschenbuch. Zustand: Neu. From Model-Driven Design to Resource Management for Distributed Embedded Systems | IFIP TC 10 Working Conference on Distributed and Parallel Embedded Systems (DIPES 2006) October 11-13, 2006, Braga, Portugal | Bernd Kleinjohann (u. a.) | Taschenbuch | xii | Englisch | 2010 | Springer | EAN 9781441942654 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu.

Taschenbuch. Zustand: Neu. Distributed Embedded Systems: Design, Middleware and Resources | IFIP 20th World Computer Congress, TC10 Working Conference on Distributed and Parallel Embedded Systems (DIPES 2008), September 7-10, 2008, Milano, Italy | Bernd Kleinjohann (u. a.) | Taschenbuch | xvi | Englisch | 2010 | Springer | EAN 9781441935052 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu.

Hardcover. Zustand: Brand New. 225 pages. 9.25x6.25x0.75 inches. In Stock.

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - This year, the IFIP Working Conference on Distributed and Parallel Embedded Sys tems (DIPES 2008) is held as part of the IFIP World Computer Congress, held in Milan on September 7 10, 2008. The embedded systems world has a great deal of experience with parallel and distributed computing. Many embedded computing systems require the high performance that can be delivered by parallel computing. Parallel and distributed computing are often the only ways to deliver adequate real time performance at low power levels. This year's conference attracted 30 submissions, of which 21 were accepted. Prof. Jor g Henkel of the University of Karlsruhe graciously contributed a keynote address on embedded computing and reliability. We would like to thank all of the program committee members for their diligence. Wayne Wolf, Bernd Kleinjohann, and Lisa Kleinjohann Acknowledgements We would like to thank all people involved in the organization of the IFIP World Computer Congress 2008, especially the IPC Co Chairs Judith Bishop and Ivo De Lotto, the Organization Chair Giulio Occhini, as well as the Publications Chair John Impagliazzo. Further thanks go to the authors for their valuable contributions to DIPES 2008. Last but not least we would like to acknowledge the considerable amount of work and enthusiasm spent by our colleague Claudius Stern in preparing theproceedingsofDIPES2008. Hemadeitpossibletoproducethemintheircurrent professional and homogeneous style.

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - Embedded computing systems have started to carry out the key control functions in diverse domains such as telecommunications, automotive electronics, avionics and even complete industrial manufacturing lines. Traditionally, such embedded control systems have been implemented in a monolithic, centralized manner. However, distributed and parallel solutions have been steadily gaining popularity. In a distributed setup, the control task is carried out by a number of controllers distributed over the entire system and interconnected as a network by communication components such as field buses. More demanding local control applications require controllers based on parallel architectures or processors with dedicated co-processors. Distribution and parallelism in embedded system design increase the engineering challenges and demand new development methods and tools.From Model-Driven Design to Resource Management for Distributed Embedded Systems contains 16 original contributions as well as 12 invited papers by distinguished invited speakers. These papers were presented at the Working Conference on Distributed and Parallel Embedded Systems (DIPES 2006), which was held in October 2006 in Braga, Portugal, and sponsored by the International Federation for Information Processing (IFIP).This volume covers the following very timely topics: model-driven design, test and evolution of embedded systems, timing analysis and predictability, scheduling, allocation, communication and resource management in distributed real-time systems.

Buch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - This year, the IFIP Working Conference on Distributed and Parallel Embedded Sys tems (DIPES 2008) is held as part of the IFIP World Computer Congress, held in Milan on September 7 10, 2008. The embedded systems world has a great deal of experience with parallel and distributed computing. Many embedded computing systems require the high performance that can be delivered by parallel computing. Parallel and distributed computing are often the only ways to deliver adequate real time performance at low power levels. This year's conference attracted 30 submissions, of which 21 were accepted. Prof. Jor g Henkel of the University of Karlsruhe graciously contributed a keynote address on embedded computing and reliability. We would like to thank all of the program committee members for their diligence. Wayne Wolf, Bernd Kleinjohann, and Lisa Kleinjohann Acknowledgements We would like to thank all people involved in the organization of the IFIP World Computer Congress 2008, especially the IPC Co Chairs Judith Bishop and Ivo De Lotto, the Organization Chair Giulio Occhini, as well as the Publications Chair John Impagliazzo. Further thanks go to the authors for their valuable contributions to DIPES 2008. Last but not least we would like to acknowledge the considerable amount of work and enthusiasm spent by our colleague Claudius Stern in preparing theproceedingsofDIPES2008. Hemadeitpossibletoproducethemintheircurrent professional and homogeneous style.

Gebunden. Zustand: New. Arslan Munir, University of Nevada, Reno (UNR), USAArslan Munir is currently an Assistant Professor in the Department of Computer Science and Engineering (CSE) at the UNR. Before then he was a postdoctoral research associate in the Electrical and Computer E.

Zustand: Sehr gut. Zustand: Sehr gut | Seiten: 400 | Sprache: Englisch | Produktart: Bücher | Keine Beschreibung verfügbar.

Taschenbuch. Zustand: Neu. Architecture and Design of Distributed Embedded Systems | IFIP WG10.3/WG10.4/WG10.5 International Workshop on Distributed and Parallel Embedded Systems (DIPES 2000) October 18-19, 2000, Schloß Eringerfeld, Germany | Bernd Kleinjohann | Taschenbuch | xiv | Englisch | 2013 | Springer | EAN 9781475745351 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu.

Taschenbuch. Zustand: Neu. Design and Analysis of Distributed Embedded Systems | IFIP 17th World Computer Congress - TC10 Stream on Distributed and Parallel Embedded Systems (DIPES 2002) August 25-29, 2002, Montréal, Québec, Canada | Bernd Kleinjohann (u. a.) | Taschenbuch | xvi | Englisch | 2013 | Springer | EAN 9781475749373 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu.

Buch. Zustand: Neu. Neuware - Embedded computing systems have started to carry out the key control functions in diverse domains such as telecommunications, automotive electronics, avionics and even complete industrial manufacturing lines. Traditionally, such embedded control systems have been implemented in a monolithic, centralized manner. However, distributed and parallel solutions have been steadily gaining popularity. In a distributed setup, the control task is carried out by a number of controllers distributed over the entire system and interconnected as a network by communication components such as field buses. More demanding local control applications require controllers based on parallel architectures or processors with dedicated co-processors. Distribution and parallelism in embedded system design increase the engineering challenges and demand new development methods and tools.From Model-Driven Design to Resource Management for Distributed Embedded Systems contains 16 original contributions as well as 12 invited papers by distinguished invited speakers. These papers were presented at the Working Conference on Distributed and Parallel Embedded Systems (DIPES 2006), which was held in October 2006 in Braga, Portugal, and sponsored by the International Federation for Information Processing (IFIP).This volume covers the following very timely topics: model-driven design, test and evolution of embedded systems, timing analysis and predictability, scheduling, allocation, communication and resource management in distributed real-time systems.

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - Due to the decreasing production costs of IT systems, applications that had to be realised as expensive PCBs formerly, can now be realised as a system-on-chip. Furthermore, low cost broadband communication media for wide area communication as well as for the realisation of local distributed systems are available. Typically the market requires IT systems that realise a set of specific features for the end user in a given environment, so called embedded systems. Some examples for such embedded systems are control systems in cars, airplanes, houses or plants, information and communication devices like digital TV, mobile phones or autonomous systems like service- or edutainment robots. For the design of embedded systems the designer has to tackle three major aspects: The application itself including the man-machine interface, The (target) architecture of the system including all functional and non-functional constraints and, the design methodology including modelling, specification, synthesis, test and validation. The last two points are a major focus of this book. This book documents the high quality approaches and results that were presented at the International Workshop on Distributed and Parallel Embedded Systems (DIPES 2000), which was sponsored by the International Federation for Information Processing (IFIP), and organised by IFIP working groups WG10.3, WG10.4 and WG10.5. The workshop took place on October 18-19, 2000, in Schloß Eringerfeld near Paderborn, Germany. Architecture and Design of Distributed Embedded Systems is organised similar to the workshop. Chapters 1 and 4 (Methodology I and II) deal with different modelling and specification paradigms and the corresponding design methodologies. Generic system architectures for different classes of embedded systems are presented in Chapter 2. In Chapter 3 several design environments for the support ofspecific design methodologies are presented. Problems concerning test and validation are discussed in Chapter 5. The last two chapters include distribution and communication aspects (Chapter 6) and synthesis techniques for embedded systems (Chapter 7). This book is essential reading for computer science researchers and application developers.

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - Design and Analysis of Distributed Embedded Systems is organized similar to the conference. Chapters 1 and 2 deal with specification methods and their analysis while Chapter 6 concentrates on timing and performance analysis. Chapter 3 describes approaches to system verification at different levels of abstraction. Chapter 4 deals with fault tolerance and detection. Middleware and software reuse aspects are treated in Chapter 5. Chapters 7 and 8 concentrate on the distribution related topics such as partitioning, scheduling and communication. The book closes with a chapter on design methods and frameworks.

Buch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - Due to the decreasing production costs of IT systems, applications that had to be realised as expensive PCBs formerly, can now be realised as a system-on-chip. Furthermore, low cost broadband communication media for wide area communication as well as for the realisation of local distributed systems are available. Typically the market requires IT systems that realise a set of specific features for the end user in a given environment, so called embedded systems. Some examples for such embedded systems are control systems in cars, airplanes, houses or plants, information and communication devices like digital TV, mobile phones or autonomous systems like service- or edutainment robots. For the design of embedded systems the designer has to tackle three major aspects: The application itself including the man-machine interface, The (target) architecture of the system including all functional and non-functional constraints and, the design methodology including modelling, specification, synthesis, test and validation. The last two points are a major focus of this book. This book documents the high quality approaches and results that were presented at the International Workshop on Distributed and Parallel Embedded Systems (DIPES 2000), which was sponsored by the International Federation for Information Processing (IFIP), and organised by IFIP working groups WG10.3, WG10.4 and WG10.5. The workshop took place on October 18-19, 2000, in Schloß Eringerfeld near Paderborn, Germany. Architecture and Design of Distributed Embedded Systems is organised similar to the workshop. Chapters 1 and 4 (Methodology I and II) deal with different modelling and specification paradigms and the corresponding design methodologies. Generic system architectures for different classes of embedded systems are presented in Chapter 2. In Chapter 3 several design environments for the support ofspecific design methodologies are presented. Problems concerning test and validation are discussed in Chapter 5. The last two chapters include distribution and communication aspects (Chapter 6) and synthesis techniques for embedded systems (Chapter 7). This book is essential reading for computer science researchers and application developers.

Buch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - Design and Analysis of Distributed Embedded Systems is organized similar to the conference. Chapters 1 and 2 deal with specification methods and their analysis while Chapter 6 concentrates on timing and performance analysis. Chapter 3 describes approaches to system verification at different levels of abstraction. Chapter 4 deals with fault tolerance and detection. Middleware and software reuse aspects are treated in Chapter 5. Chapters 7 and 8 concentrate on the distribution related topics such as partitioning, scheduling and communication. The book closes with a chapter on design methods and frameworks.

Paperback. Zustand: Brand New. 252 pages. 9.25x6.10x0.57 inches. In Stock.

Paperback. Zustand: Brand New. reprint edition. 297 pages. 9.26x6.11x0.69 inches. In Stock.

Taschenbuch. Zustand: Neu. Distributed and Parallel Embedded Systems | IFIP WG10.3/WG10.5 International Workshop on Distributed and Parallel Embedded Systems (DIPES'98) October 5-6, 1998, Schloß Eringerfeld, Germany | Franz J. Rammig | Taschenbuch | x | Englisch | 2013 | Springer | EAN 9781475750065 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu.

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - Embedded systems are becoming one of the major driving forces in computer science. Furthermore, it is the impact of embedded information technology that dictates the pace in most engineering domains. Nearly all technical products above a certain level of complexity are not only controlled but increasingly even dominated by their embedded computer systems. Traditionally, such embedded control systems have been implemented in a monolithic, centralized way. Recently, distributed solutions are gaining increasing importance. In this approach, the control task is carried out by a number of controllers distributed over the entire system and connected by some interconnect network, like fieldbuses. Such a distributed embedded system may consist of a few controllers up to several hundred, as in today's top-range automobiles. Distribution and parallelism in embedded systems design increase the engineering challenges and require new development methods and tools. This book is the result of the International Workshop on Distributed and Parallel Embedded Systems (DIPES'98), organized by the International Federation for Information Processing (IFIP) Working Groups 10.3 (Concurrent Systems) and 10.5 (Design and Engineering of Electronic Systems). The workshop took place in October 1998 in Schloss Eringerfeld, near Paderborn, Germany, and the resulting book reflects the most recent points of view of experts from Brazil, Finland, France, Germany, Italy, Portugal, and the USA. The book is organized in six chapters: `Formalisms for Embedded System Design': IP-based system design and various approaches to multi-language formalisms. `Synthesis from Synchronous/Asynchronous Specification': Synthesis techniques based on Message Sequence Charts (MSC), StateCharts, and Predicate/Transition Nets. `Partitioning and Load-Balancing': Application in simulation models and target systems. `Design Environments' for distributed embedded systems and their impact on the industrial state of the art. `Object Oriented Approaches': Impact of OO-techniques on distributed embedded systems. £/LIST£ This volume will be essential reading for computer science researchers and application developers.

Gebunden. Zustand: New. Embedded systems are becoming one of the major driving forces in computer science. Furthermore, it is the impact of embedded information technology that dictates the pace in most engineering domains. Nearly all technical products above a certain level of.

Buch. Zustand: Neu. Neuware - Embedded systems are becoming one of the major driving forces in computer science. Furthermore, it is the impact of embedded information technology that dictates the pace in most engineering domains. Nearly all technical products above a certain level of complexity are not only controlled but increasingly even dominated by their embedded computer systems. Traditionally, such embedded control systems have been implemented in a monolithic, centralized way. Recently, distributed solutions are gaining increasing importance. In this approach, the control task is carried out by a number of controllers distributed over the entire system and connected by some interconnect network, like fieldbuses. Such a distributed embedded system may consist of a few controllers up to several hundred, as in today's top-range automobiles. Distribution and parallelism in embedded systems design increase the engineering challenges and require new development methods and tools. This book is the result of the International Workshop on Distributed and Parallel Embedded Systems (DIPES'98), organized by the International Federation for Information Processing (IFIP) Working Groups 10.3 (Concurrent Systems) and 10.5 (Design and Engineering of Electronic Systems). The workshop took place in October 1998 in Schloss Eringerfeld, near Paderborn, Germany, and the resulting book reflects the most recent points of view of experts from Brazil, Finland, France, Germany, Italy, Portugal, and the USA. The book is organized in six chapters: `Formalisms for Embedded System Design': IP-based system design and various approaches to multi-language formalisms. `Synthesis from Synchronous/Asynchronous Specification': Synthesis techniques based on Message Sequence Charts (MSC), StateCharts, and Predicate/Transition Nets. `Partitioning and Load-Balancing': Application in simulation models and target systems. `Design Environments' for distributed embedded systems and their impact on the industrial state of the art. `Object Oriented Approaches': Impact of OO-techniques on distributed embedded systems. £/LIST£ This volume will be essential reading for computer science researchers and application developers.