Gesamtpreis (1 Artikel Artikel):
Versandziel:
weiming shen (39 Ergebnisse)
Direkt zu den wichtigsten Suchergebnissen
Suchfilter
Produktart
- Alle Product Types
- Bücher (39)
- Magazine & Zeitschriften (Keine weiteren Ergebnisse entsprechen dieser Verfeinerung)
- Comics (Keine weiteren Ergebnisse entsprechen dieser Verfeinerung)
- Noten (Keine weiteren Ergebnisse entsprechen dieser Verfeinerung)
- Kunst, Grafik & Poster (Keine weiteren Ergebnisse entsprechen dieser Verfeinerung)
- Fotografien (Keine weiteren Ergebnisse entsprechen dieser Verfeinerung)
- Karten (Keine weiteren Ergebnisse entsprechen dieser Verfeinerung)
- Manuskripte & Papierantiquitäten (Keine weiteren Ergebnisse entsprechen dieser Verfeinerung)
Zustand Mehr dazu
Weitere Eigenschaften
- Erstausgabe (Keine weiteren Ergebnisse entsprechen dieser Verfeinerung)
- Signiert (Keine weiteren Ergebnisse entsprechen dieser Verfeinerung)
- Schutzumschlag (Keine weiteren Ergebnisse entsprechen dieser Verfeinerung)
- Angebotsfoto (14)
Sprache (1)
Gratisversand
Land des Verkäufers
Verkäuferbewertung
-
Process Planning and Scheduling for Distributed Manufacturing.
Buch 10 von 74: Springer Series in Advanced ManufacturingAnbieter: Universitätsbuchhandlung Herta Hold GmbH, Berlin, Deutschland
Verbandsmitglied: GIAQ ILAB VDA
Verkäuferbewertung 4 von 5 Sternen
XIX, 429 p. Hardcover. Versand aus Deutschland / We dispatch from Germany via Air Mail. Einband bestoßen, daher Mängelexemplar gestempelt, sonst sehr guter Zustand. Imperfect copy due to slightly bumped cover, apart from this in very good condition. Stamped. Springer Series in Advanced Manufacturing. Sprache: Englisch.
-
Information Technology for Balanced Manufacturing Systems: IFIP TC 5, WG 5.5 Seventh International Conference on Information Technology for Balanced . and Communication Technology, 220)
Anbieter: Phatpocket Limited, Waltham Abbey, HERTS, Vereinigtes Königreich
Verkäuferbewertung 5 von 5 Sternen
EUR 53,15
EUR 12,30 Versand
Versand von Vereinigtes Königreich nach USAAnzahl: 1 verfügbar
In den WarenkorbZustand: Good. Used - Good. Your purchase helps support Sri Lankan Children's Charity 'The Rainbow Centre.' Ex-library, but has been well cared for. Our donations to The Rainbow Centre have helped provide an education and a safe haven to hundreds of children who live in appalling conditions.
-
Information Technology For Balanced Manufacturing Systems (Hb)
Anbieter: Romtrade Corp., STERLING HEIGHTS, MI, USA
Verkäuferbewertung 5 von 5 Sternen
Zustand: New. This is a Brand-new US Edition. This Item may be shipped from US or any other country as we have multiple locations worldwide.
-
Computer Supported Cooperative Work in Design I: 8th International Conference, CSCWD 2004, Xiamen, China, May 26-28, 2004. Revised Selected Papers (Lecture Notes in Computer Science, 3168)
Anbieter: Ria Christie Collections, Uxbridge, Vereinigtes Königreich
Verkäuferbewertung 5 von 5 Sternen
EUR 60,06
EUR 13,85 Versand
Versand von Vereinigtes Königreich nach USAAnzahl: Mehr als 20 verfügbar
In den WarenkorbZustand: New. In.
-
Computer Supported Cooperative Work in Design IV
Anbieter: Majestic Books, Hounslow, Vereinigtes Königreich
Verkäuferbewertung 4 von 5 Sternen
EUR 76,00
EUR 7,52 Versand
Versand von Vereinigtes Königreich nach USAAnzahl: 1 verfügbar
In den WarenkorbZustand: New. pp. 692 Illus.
-
Computer Supported Cooperative Work in Design I: 8th International Conference, Cscwd 2004, Xiamen, China, May 26-28, 2004. Revised Selected Papers
Anbieter: Revaluation Books, Exeter, Vereinigtes Königreich
Verkäuferbewertung 5 von 5 Sternen
EUR 80,59
EUR 14,45 Versand
Versand von Vereinigtes Königreich nach USAAnzahl: 2 verfügbar
In den WarenkorbPaperback. Zustand: Brand New. 1st edition. 458 pages. 8.75x5.75x1.00 inches. In Stock.
-
INFORMATION TECHNOLOGY FOR BALANCED MANUFACTURING SYSTEMS (HB)
Anbieter: Romtrade Corp., STERLING HEIGHTS, MI, USA
Verkäuferbewertung 5 von 5 Sternen
Zustand: New. This is a Brand-new US Edition. This Item may be shipped from US or any other country as we have multiple locations worldwide.
-
EUR 64,80
EUR 48,99 Versand
Versand von Deutschland nach USAAnzahl: Mehr als 20 verfügbar
In den WarenkorbKartoniert / Broschiert. Zustand: New. KlappentextrnrnThe second and final volume of the most important work ever to appear in English on Confucian spiritual thought and practice.
-
Computer Supported Cooperative Work in Design I : 8th International Conference, CSCWD 2004, Xiamen, China, May 26-28, 2004. Revised Selected Papers
Sprache: Englisch
Verlag: Springer Berlin Heidelberg, 2005
ISBN 10: 3540294007 ISBN 13: 9783540294009
Anbieter: AHA-BUCH GmbH, Einbeck, Deutschland
Verkäuferbewertung 5 von 5 Sternen
Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - The design of complex artifacts and systems requires the cooperation of multidisciplinary design teams using multiple commercial and non-commercial engineering tools such as CAD tools, modeling, simulation and optimization software, engineering databases, and knowledge-based systems. Individuals or individual groups of multidisciplinary design teams usually work in parallel and separately with various engineering tools, which are located on different sites, often for quite a long time. At any moment, individual members may be working on different versions of a design or viewing the design from various perspectives, at different levels of detail. In order to meet these requirements, it is necessary to have effective and efficient collaborative design environments. These environments should not only automate individual tasks, in the manner of traditional computer-aided engineering tools, but also enable individual members to share information, collaborate and coordinate their activities within the context of a design project. CSCW (computer-supported cooperative work) in design is concerned with the development of such environments.
-
Taschenbuch. Zustand: Neu. Computer Supported Cooperative Work in Design I | 8th International Conference, CSCWD 2004, Xiamen, China, May 26-28, 2004. Revised Selected Papers | Weiming Shen (u. a.) | Taschenbuch | Einband - flex.(Paperback) | Englisch | 2005 | Springer | EAN 9783540294009 | Verantwortliche Person für die EU: Springer Nature Customer Service Center GmbH, Europaplatz 3, 69115 Heidelberg, productsafety[at]springernature[dot]com | Anbieter: preigu.
-
Computer Supported Cooperative Work in Design III: 10th International Conference, CSCWD 2006, Nanjing, China, May 3-5, 2006, Revised Selected Papers (Lecture Notes in Computer Science, 4402)
Anbieter: Ria Christie Collections, Uxbridge, Vereinigtes Königreich
Verkäuferbewertung 5 von 5 Sternen
EUR 114,52
EUR 13,85 Versand
Versand von Vereinigtes Königreich nach USAAnzahl: Mehr als 20 verfügbar
In den WarenkorbZustand: New. In.
-
Computer Supported Cooperative Work in Design IV: 11th International Conference, CSCWD 2007, Melbourne, Australia, April 26-28, 2007. Revised Selected Papers (Lecture Notes in Computer Science, 5236)
Anbieter: Ria Christie Collections, Uxbridge, Vereinigtes Königreich
Verkäuferbewertung 5 von 5 Sternen
EUR 114,52
EUR 13,85 Versand
Versand von Vereinigtes Königreich nach USAAnzahl: Mehr als 20 verfügbar
In den WarenkorbZustand: New. In.
-
Computer Supported Cooperative Work in Design II: 9th International Conference, CSCWD 2005, Coventry, UK, May 24-26, 2005, Revised Selected Papers (Lecture Notes in Computer Science, 3865)
Anbieter: Ria Christie Collections, Uxbridge, Vereinigtes Königreich
Verkäuferbewertung 5 von 5 Sternen
EUR 114,52
EUR 13,85 Versand
Versand von Vereinigtes Königreich nach USAAnzahl: Mehr als 20 verfügbar
In den WarenkorbZustand: New. In.
-
Information Technology For Balanced Manufacturing Systems
Anbieter: Romtrade Corp., STERLING HEIGHTS, MI, USA
Verkäuferbewertung 5 von 5 Sternen
Zustand: New. This is a Brand-new US Edition. This Item may be shipped from US or any other country as we have multiple locations worldwide.
-
Multi-Agent Systems for Concurrent Intelligent Design and Manufacturing
Anbieter: Anybook.com, Lincoln, Vereinigtes Königreich
Verkäuferbewertung 5 von 5 Sternen
EUR 101,24
EUR 32,22 Versand
Versand von Vereinigtes Königreich nach USAAnzahl: 1 verfügbar
In den WarenkorbZustand: Fair. This is an ex-library book and may have the usual library/used-book markings inside.This book has hardback covers. In fair condition, suitable as a study copy. No dust jacket. Please note the Image in this listing is a stock photo and may not match the covers of the actual item,750grams, ISBN:9780748408825.
-
Taschenbuch. Zustand: Neu. Computer Supported Cooperative Work in Design III | 10th International Conference, CSCWD 2006, Nanjing, China, May 3-5, 2006, Revised Selected Papers | Weiming Shen (u. a.) | Taschenbuch | xv | Englisch | 2007 | Springer | EAN 9783540728627 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu.
-
Taschenbuch. Zustand: Neu. Computer Supported Cooperative Work in Design IV | 11th International Conference, CSCWD 2007, Melbourne, Australia, April 26-28, 2007. Revised Selected Papers | Weiming Shen (u. a.) | Taschenbuch | xii | Englisch | 2008 | Springer | EAN 9783540927181 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu.
-
Computer Supported Cooperative Work in Design IV: 11th International Conference, Cscwd 2007, Melbourne, Australia, April 26-28, 2007. Revised Selected Papers
Anbieter: Revaluation Books, Exeter, Vereinigtes Königreich
Verkäuferbewertung 5 von 5 Sternen
EUR 155,93
EUR 14,45 Versand
Versand von Vereinigtes Königreich nach USAAnzahl: 2 verfügbar
In den WarenkorbPaperback. Zustand: Brand New. 2008 edition. 676 pages. 9.25x6.25x1.25 inches. In Stock.
-
Zustand: Sehr gut. Zustand: Sehr gut | Seiten: 692 | Sprache: Englisch | Produktart: Bücher | Design of complex artifacts and systems requires the cooperation of multidisciplinary design teams using multiple sophisticated commercial and non-commercial engine- ing tools such as CAD tools, modeling, simulation and optimization software, en- neering databases, and knowledge-based systems. Individuals or individual groups of multidisciplinary design teams usually work in parallel and independently with various engineering tools, which are located on different sites, often for quite a long period of time. At any moment, individual members may be working on different versions of a design or viewing the design from various perspectives, at different levels of details. In order to meet these requirements, it is necessary to have efficient comput- supported collaborative design systems. These systems should not only automate in- vidual tasks, in the manner of traditional computer-aided engineering tools, but also enable individual members to share information, collaborate, and coordinate their activities within the context of a design project. Based on close international collaboration between the University of Technology of Compiègne in France and the Institute of Computing Technology of the Chinese Ac- emy of Sciences in the early 1990s, a series of international workshops on CSCW in Design started in 1996. In order to facilitate the organization of these workshops, an International Working Group on CSCW in Design (CSCWD) was established and an International Steering Committee was formed in 1998. The series was converted to int- national conferences in 2000 building on the success of the four previous workshops.
-
Computer Supported Cooperative Work in Design 2
Sprache: Englisch
Verlag: Springer Berlin Heidelberg, 2006
ISBN 10: 3540329692 ISBN 13: 9783540329695
EUR 118,64
EUR 48,99 Versand
Versand von Deutschland nach USAAnzahl: Mehr als 20 verfügbar
In den WarenkorbZustand: New. This book constitutes the thoroughly refereed post-proceedings of the 9th International Conference on Computer Supported Cooperative Work in Design, CSCWD 2005, held in Coventry, UK, in May 2005. The 65 revised full papers presented were carefully review.
-
Computer Supported Cooperative Work in Design III: 10th International Conference, Cscwd 2006, Nanjing, China, May 3-5, 2006, Revised Selected Papers
Sprache: Englisch
Verlag: Springer-Verlag New York Inc, 2007
ISBN 10: 3540728627 ISBN 13: 9783540728627
Anbieter: Revaluation Books, Exeter, Vereinigtes Königreich
Verkäuferbewertung 5 von 5 Sternen
EUR 157,66
EUR 17,35 Versand
Versand von Vereinigtes Königreich nach USAAnzahl: 2 verfügbar
In den WarenkorbPaperback. Zustand: Brand New. 1st edition. 763 pages. 9.00x6.00x1.00 inches. In Stock.
-
Process Planning and Scheduling for Distributed Manufacturing (Springer Series in Advanced Manufacturing)
Buch 10 von 74: Springer Series in Advanced ManufacturingAnbieter: Ria Christie Collections, Uxbridge, Vereinigtes Königreich
Verkäuferbewertung 5 von 5 Sternen
EUR 162,92
EUR 13,85 Versand
Versand von Vereinigtes Königreich nach USAAnzahl: Mehr als 20 verfügbar
In den WarenkorbZustand: New. In.
-
Process Planning and Scheduling for Distributed Manufacturing (Springer Series in Advanced Manufacturing)
Buch 10 von 74: Springer Series in Advanced ManufacturingAnbieter: Ria Christie Collections, Uxbridge, Vereinigtes Königreich
Verkäuferbewertung 5 von 5 Sternen
EUR 162,92
EUR 13,85 Versand
Versand von Vereinigtes Königreich nach USAAnzahl: Mehr als 20 verfügbar
In den WarenkorbZustand: New. In.
-
Computer Supported Cooperative Work in Design IV : 11th International Conference, CSCWD 2007, Melbourne, Australia, April 26-28, 2007. Revised Selected Papers
Anbieter: AHA-BUCH GmbH, Einbeck, Deutschland
Verkäuferbewertung 5 von 5 Sternen
Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - Design of complex artifacts and systems requires the cooperation of multidisciplinary design teams using multiple sophisticated commercial and non-commercial engine- ing tools such as CAD tools, modeling, simulation and optimization software, en- neering databases, and knowledge-based systems. Individuals or individual groups of multidisciplinary design teams usually work in parallel and independently with various engineering tools, which are located on different sites, often for quite a long period of time. At any moment, individual members may be working on different versions of a design or viewing the design from various perspectives, at different levels of details. In order to meet these requirements, it is necessary to have efficient comput- supported collaborative design systems. These systems should not only automate in- vidual tasks, in the manner of traditional computer-aided engineering tools, but also enable individual members to share information, collaborate, and coordinate their activities within the context of a design project. Based on close international collaboration between the University of Technology of Compiègne in France and the Institute of Computing Technology of the Chinese Ac- emy of Sciences in the early 1990s, a series of international workshops on CSCW in Design started in 1996. In order to facilitate the organization of these workshops, an International Working Group on CSCW in Design (CSCWD) was established and an International Steering Committee was formed in 1998. The series was converted to int- national conferences in 2000 building on the success of the four previous workshops.
-
Computer Supported Cooperative Work in Design III : 10th International Conference, CSCWD 2006, Nanjing, China, May 3-5, 2006, Revised Selected Papers
Anbieter: AHA-BUCH GmbH, Einbeck, Deutschland
Verkäuferbewertung 5 von 5 Sternen
Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - The design of complex artifacts and systems requires the cooperation of multidiscip- nary design teams using multiple commercial and proprietary engineering software tools (e.g., CAD, modeling, simulation, visualization, and optimization), engineering databases, and knowledge-based systems. Individuals or individual groups of mult- isciplinary design teams usually work in parallel and separately with various en- neering software tools which are located at different sites. In addition, individual members may be working on different versions of a design or viewing the design from different perspectives, at different levels of detail. In order to accomplish the work, it is necessary to have effective and efficient c- laborative design environments. Such environments should not only automate in- vidual tasks, in the manner of traditional computer-aided engineering tools, but also enable individual members to share information, collaborate, and coordinate their activities within the context of a design project. CSCW (computer-supported coope- tive work) in design is concerned with the development of such environments.
-
Information Technology for Balanced Manufacturing Systems: IFIP TC 5, WG 5.5 Seventh International Conference on Information Technology for Balanced ... and Communication Technology, 220)
Anbieter: Ria Christie Collections, Uxbridge, Vereinigtes Königreich
Verkäuferbewertung 5 von 5 Sternen
EUR 175,03
EUR 13,85 Versand
Versand von Vereinigtes Königreich nach USAAnzahl: Mehr als 20 verfügbar
In den WarenkorbZustand: New. In.
-
Multi-Agent Systems for Concurrent Intelligent Design and Manufacturing
Anbieter: PBShop.store US, Wood Dale, IL, USA
Verkäuferbewertung 5 von 5 Sternen
HRD. Zustand: New. New Book. Shipped from UK. Established seller since 2000.
-
Multi-Agent Systems for Concurrent Intelligent Design and Manufacturing
Anbieter: PBShop.store UK, Fairford, GLOS, Vereinigtes Königreich
Verkäuferbewertung 5 von 5 Sternen
EUR 191,90
EUR 6,79 Versand
Versand von Vereinigtes Königreich nach USAAnzahl: 1 verfügbar
In den WarenkorbHRD. Zustand: New. New Book. Shipped from UK. Established seller since 2000.
-
Process Planning and Scheduling for Distributed Manufacturing
Buch 10 von 74: Springer Series in Advanced ManufacturingAnbieter: Majestic Books, Hounslow, Vereinigtes Königreich
Verkäuferbewertung 4 von 5 Sternen
EUR 201,07
EUR 7,52 Versand
Versand von Vereinigtes Königreich nach USAAnzahl: 1 verfügbar
In den WarenkorbZustand: New. pp. 452 Illus.
-
Information Technology for Balanced Manufacturing Systems: IFIP TC 5, WG 5.5 Seventh International Conference on Information Technology for Balanced ... and Communication Technology, 220)
Anbieter: Ria Christie Collections, Uxbridge, Vereinigtes Königreich
Verkäuferbewertung 5 von 5 Sternen
EUR 223,44
EUR 13,85 Versand
Versand von Vereinigtes Königreich nach USAAnzahl: Mehr als 20 verfügbar
In den WarenkorbZustand: New. In.
