Optimieren Sie Ihre Suche

  • Bücher (32)

bis

Benutzerdefinierte Preisspanne (EUR)

bis

Teik cheng lim (32 Ergebnisse)

Autor: 
Mit der Detailsuche verfeinern
  • Sprache: Englisch

    Verlag: Cambridge University Press, 2022

    1009246402 / 9781009246408

    • Softcover

    Anbieter: Kennys Bookstore, Olney, MD, USAKennys Bookstore

    Verkäufer/-in mit 5 Sternen
    Verkäufer/-in kontaktieren

    Zustand: Neu

    EUR 38,83

    EUR 9,41 Versand 
    Versand innerhalb von USA

    Anzahl: Mehr als 20 verfügbar

    Zustand: New.

  • Sprache: Englisch

    Verlag: Cambridge University Press, 2022

    1009246402 / 9781009246408

    • Softcover

    Anbieter: GreatBookPricesUK, Woodford Green, Vereinigtes KönigreichGreatBookPricesUK

    Verkäufer/-in mit 5 Sternen
    Verkäufer/-in kontaktieren

    Zustand: Gebraucht - Wie neu

    EUR 30,28

    EUR 18,00 Versand 
    Versand von Vereinigtes Königreich nach USA

    Anzahl: Mehr als 20 verfügbar

    Zustand: As New. Unread book in perfect condition.

  • Sprache: Englisch

    Verlag: Cambridge University Press Sep 2022, 2022

    1009246402 / 9781009246408

    • Softcover

    Anbieter: AHA-BUCH GmbH, Einbeck, DeutschlandAHA-BUCH GmbH

    Verkäufer/-in mit 5 Sternen
    Verkäufer/-in kontaktieren

    Zustand: Neu

    EUR 44,64

    EUR 35,00 Versand 
    Versand von Deutschland nach USA

    Anzahl: 2 verfügbar

    Taschenbuch. Zustand: Neu. Neuware - A partially-auxetic metamaterial is introduced, inspired by the Maltese cross. Each unit of this metamaterial consists of a pair of counter-rotating equal-armed crosses, which is interconnected to neighboring units via hinge rods and connecting rods. Based on linkage theory, the on-axes Poisson's ratio was established considering a two-fold symmetrical mechanism, while the (anti)tetrachiral mechanisms were identified for on-axes uniaxial compression. A shearing mechanism is suggested for pure shearing and diagonal loading of the metamaterial with square array. Results suggest that the approximated infinitesimal models are valid for the Poisson's ratio of the two-fold symmetrical and the (anti)tetrachiral mechanisms under on-axis tension and compression, respectively; however, the finite model is recommended for quantifying the Poisson's ratio under pure shear and off-axis loading. This metamaterial manifests microstructural trinity, in which three different loading modes result in three different groups of deformation mechanisms. Finally, suggestions are put forth for some unsolved predictive problems.…

  • Sprache: Englisch

    Verlag: CAMBRIDGE, 2022

    1009246402 / 9781009246408

    • Softcover

    Anbieter: moluna, Greven, Deutschlandmoluna

    Verkäufer/-in mit 5 Sternen
    Verkäufer/-in kontaktieren

    Zustand: Neu

    EUR 33,40

    EUR 48,99 Versand 
    Versand von Deutschland nach USA

    Anzahl: Mehr als 20 verfügbar

    Zustand: New. Inhaltsverzeichnis1. Introduction 2. Two-fold Symmetrical Mechanism 3. Tetrachiral Mechanism 4. Anti-tetrachiral Mechanism 5. Shear Mechanism 6. Deformation Path 7. Conclusions and Recommendations References.Klappentex.

  • Sprache: Englisch

    Verlag: CRC Press, 2019

    0367380595 / 9780367380595

    • Softcover

    Anbieter: Majestic Books, Hounslow, Vereinigtes KönigreichMajestic Books

    Verkäufer/-in mit 4 Sternen
    Verkäufer/-in kontaktieren

    Zustand: Neu

    EUR 96,12

    EUR 7,80 Versand 
    Versand von Vereinigtes Königreich nach USA

    Anzahl: 3 verfügbar

    Zustand: New.

  • Sprache: Englisch

    Verlag: CRC Press, 2019

    0367380595 / 9780367380595

    • Softcover

    Anbieter: GreatBookPricesUK, Woodford Green, Vereinigtes KönigreichGreatBookPricesUK

    Verkäufer/-in mit 5 Sternen
    Verkäufer/-in kontaktieren

    Zustand: Gebraucht - Wie neu

    EUR 92,61

    EUR 18,00 Versand 
    Versand von Vereinigtes Königreich nach USA

    Anzahl: 10 verfügbar

    Zustand: As New. Unread book in perfect condition.

  • Sprache: Englisch

    Verlag: World Scientific Publishing Company, 2005

    9812564543 / 9789812564542

    • Softcover

    Anbieter: GreatBookPricesUK, Woodford Green, Vereinigtes KönigreichGreatBookPricesUK

    Verkäufer/-in mit 5 Sternen
    Verkäufer/-in kontaktieren

    Zustand: Gebraucht - Wie neu

    EUR 121,81

    EUR 18,00 Versand 
    Versand von Vereinigtes Königreich nach USA

    Anzahl: 8 verfügbar

    Zustand: As New. Unread book in perfect condition.

  • Sprache: Englisch

    Verlag: CRC Press, 2019

    0367380595 / 9780367380595

    • Softcover

    Anbieter: Kennys Bookstore, Olney, MD, USAKennys Bookstore

    Verkäufer/-in mit 5 Sternen
    Verkäufer/-in kontaktieren

    Zustand: Neu

    EUR 139,47

    EUR 9,41 Versand 
    Versand innerhalb von USA

    Anzahl: 10 verfügbar

    Zustand: New. 2019. 1st Edition. paperback. . . . . . Books ship from the US and Ireland.

  • Sprache: Englisch

    Verlag: CRC Press, 2019

    0367380595 / 9780367380595

    • Softcover

    Anbieter: moluna, Greven, Deutschlandmoluna

    Verkäufer/-in mit 5 Sternen
    Verkäufer/-in kontaktieren

    Zustand: Neu

    EUR 98,43

    EUR 48,99 Versand 
    Versand von Deutschland nach USA

    Anzahl: 1 verfügbar

    Zustand: New. U. Rajendra Acharya is a visiting faculty member at Ngee Ann Polytechnic in Singapore. His major research interests are in biomedical signal processing, bioimaging, data mining, visualization, and biophysics for better healthcare design..

  • Sprache: Englisch

    Verlag: World Scientific Pub Co Inc, 2005

    9812564543 / 9789812564542

    • Softcover

    Anbieter: Revaluation Books, Exeter, Vereinigtes KönigreichRevaluation Books

    Verkäufer/-in mit 5 Sternen
    Verkäufer/-in kontaktieren

    Zustand: Neu

    EUR 146,67

    EUR 15,00 Versand 
    Versand von Vereinigtes Königreich nach USA

    Anzahl: 2 verfügbar

    Paperback. Zustand: Brand New. illustrated edition. 396 pages. 8.75x6.00x0.75 inches. In Stock.

  • Sprache: Englisch

    Verlag: CRC Pr I Llc, 2019

    0367380595 / 9780367380595

    • Softcover

    Anbieter: Revaluation Books, Exeter, Vereinigtes KönigreichRevaluation Books

    Verkäufer/-in mit 5 Sternen
    Verkäufer/-in kontaktieren

    Zustand: Neu

    EUR 132,55

    EUR 41,99 Versand 
    Versand von Vereinigtes Königreich nach USA

    Anzahl: 1 verfügbar

    Paperback. Zustand: Brand New. 496 pages. 9.50x6.50x1.25 inches. In Stock.

  • Weitere Bilder

    Sprache: Englisch

    Verlag: Springer, 2021

    9811564485 / 9789811564482

    Serie: Buch 84 von 110 - Engineering Materials

    • Softcover

    Anbieter: preigu, Osnabrück, Deutschlandpreigu

    Verkäufer/-in mit 5 Sternen
    Verkäufer/-in kontaktieren

    Zustand: Neu

    EUR 113,20

    EUR 70,00 Versand 
    Versand von Deutschland nach USA

    Anzahl: 5 verfügbar

    Taschenbuch. Zustand: Neu. Mechanics of Metamaterials with Negative Parameters | Teik-Cheng Lim | Taschenbuch | Engineering Materials | xiv | Englisch | 2021 | Springer | EAN 9789811564482 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu. …

  • Sprache: Englisch

    Verlag: Springer, 2021

    9811564485 / 9789811564482

    Serie: Buch 84 von 110 - Engineering Materials

    • Softcover

    Anbieter: AHA-BUCH GmbH, Einbeck, DeutschlandAHA-BUCH GmbH

    Verkäufer/-in mit 5 Sternen
    Verkäufer/-in kontaktieren

    Zustand: Neu

    EUR 144,58

    EUR 42,42 Versand 
    Versand von Deutschland nach USA

    Anzahl: 1 verfügbar

    Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - This book discusses bulk solids that derive their mechanical properties not from those of their base materials, but from their designed microstructures. Focusing on the negative mechanical properties, it addresses topics that reveal the counter-intuitive nature of solids, specifically the negativity of properties that are commonly positive, such as negative bulk modulus, negative compressibility, negative hygroexpansion, negative thermal expansion, negative stiffness phase, and negative Poisson's ratio. These topics are significant not only due to the curiosity they have sparked, but also because of the possibility of designing materials and structures that can behave in ways that are not normally expected in conventional solids, and as such, of materials that can outperform solids and structures made from conventional materials.The book includes illustrations to facilitate learning, and, where appropriate, reference tables. The presentation is didactic, starting with simple cases, followed by increasingly complex ones. It provides a solid foundation for graduate students, and a valuable resource for practicing materials engineers seeking to develop novel materials through the judicious design of microstructures and their corresponding mechanisms.…

  • Sprache: Englisch

    Verlag: Springer Nature, 2021

    9811564485 / 9789811564482

    Serie: Buch 84 von 110 - Engineering Materials

    • Softcover

    Anbieter: Revaluation Books, Exeter, Vereinigtes KönigreichRevaluation Books

    Verkäufer/-in mit 5 Sternen
    Verkäufer/-in kontaktieren

    Zustand: Neu

    EUR 193,46

    EUR 15,00 Versand 
    Versand von Vereinigtes Königreich nach USA

    Anzahl: 2 verfügbar

    Paperback. Zustand: Brand New. 712 pages. 9.25x6.10x1.43 inches. In Stock.

  • Sprache: Englisch

    Verlag: World Scientific Publishing Company, 2005

    9812564152 / 9789812564153

    • Hardcover

    Anbieter: GreatBookPricesUK, Woodford Green, Vereinigtes KönigreichGreatBookPricesUK

    Verkäufer/-in mit 5 Sternen
    Verkäufer/-in kontaktieren

    Zustand: Gebraucht - Wie neu

    EUR 202,05

    EUR 18,00 Versand 
    Versand von Vereinigtes Königreich nach USA

    Anzahl: Mehr als 20 verfügbar

    Zustand: As New. Unread book in perfect condition.

  • Sprache: Englisch

    Verlag: Springer, 2020

    9811564450 / 9789811564451

    Serie: Buch 84 von 110 - Engineering Materials

    • Hardcover

    Anbieter: AHA-BUCH GmbH, Einbeck, DeutschlandAHA-BUCH GmbH

    Verkäufer/-in mit 5 Sternen
    Verkäufer/-in kontaktieren

    Zustand: Neu

    EUR 201,52

    EUR 43,18 Versand 
    Versand von Deutschland nach USA

    Anzahl: 1 verfügbar

    Buch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - This book discusses bulk solids that derive their mechanical properties not from those of their base materials, but from their designed microstructures. Focusing on the negative mechanical properties, it addresses topics that reveal the counter-intuitive nature of solids, specifically the negativity of properties that are commonly positive, such as negative bulk modulus, negative compressibility, negative hygroexpansion, negative thermal expansion, negative stiffness phase, and negative Poisson's ratio. These topics are significant not only due to the curiosity they have sparked, but also because of the possibility of designing materials and structures that can behave in ways that are not normally expected in conventional solids, and as such, of materials that can outperform solids and structures made from conventional materials.The book includes illustrations to facilitate learning, and, where appropriate, reference tables. The presentation is didactic, starting with simple cases, followed by increasingly complex ones. It provides a solid foundation for graduate students, and a valuable resource for practicing materials engineers seeking to develop novel materials through the judicious design of microstructures and their corresponding mechanisms.…

  • Sprache: Englisch

    Verlag: Springer Nature Singapore, 2016

    9811011583 / 9789811011580

    Serie: Buch 39 von 110 - Engineering Materials

    • Softcover

    Anbieter: moluna, Greven, Deutschlandmoluna

    Verkäufer/-in mit 5 Sternen
    Verkäufer/-in kontaktieren

    Zustand: Neu

    EUR 206,40

    EUR 48,99 Versand 
    Versand von Deutschland nach USA

    Anzahl: Mehr als 20 verfügbar

    Zustand: New.

  • Sprache: Englisch

    Verlag: Springer Nature Singapore, 2015

    9812872744 / 9789812872746

    Serie: Buch 39 von 110 - Engineering Materials

    • Hardcover

    Anbieter: moluna, Greven, Deutschlandmoluna

    Verkäufer/-in mit 5 Sternen
    Verkäufer/-in kontaktieren

    Zustand: Neu

    EUR 206,40

    EUR 48,99 Versand 
    Versand von Deutschland nach USA

    Anzahl: Mehr als 20 verfügbar

    Gebunden. Zustand: New.

  • Sprache: Englisch

    Verlag: World Scientific Pub Co Inc, 2005

    9812564152 / 9789812564153

    • Hardcover

    Anbieter: Revaluation Books, Exeter, Vereinigtes KönigreichRevaluation Books

    Verkäufer/-in mit 5 Sternen
    Verkäufer/-in kontaktieren

    Zustand: Neu

    EUR 254,45

    EUR 15,00 Versand 
    Versand von Vereinigtes Königreich nach USA

    Anzahl: 2 verfügbar

    Hardcover. Zustand: Brand New. no card pocket edition. 396 pages. 9.00x6.00x1.00 inches. In Stock.

  • Sprache: Englisch

    Verlag: WORLD SCIENTIFIC PUB CO INC, 2023

    9811272484 / 9789811272486

    • Hardcover

    Anbieter: moluna, Greven, Deutschlandmoluna

    Verkäufer/-in mit 5 Sternen
    Verkäufer/-in kontaktieren

    Zustand: Neu

    EUR 214,14

    EUR 48,99 Versand 
    Versand von Deutschland nach USA

    Anzahl: Mehr als 20 verfügbar

    Zustand: New.

  • Sprache: Englisch

    Verlag: World Scientific Pub Co Inc, 2023

    9811272484 / 9789811272486

    • Hardcover

    Anbieter: Revaluation Books, Exeter, Vereinigtes KönigreichRevaluation Books

    Verkäufer/-in mit 5 Sternen
    Verkäufer/-in kontaktieren

    Zustand: Neu

    EUR 259,37

    EUR 15,00 Versand 
    Versand von Vereinigtes Königreich nach USA

    Anzahl: 2 verfügbar

    Hardcover. Zustand: Brand New. 511 pages. 6.00x1.46x9.00 inches. In Stock.

  • Sprache: Englisch

    Verlag: CRC Press, 2012

    1439871736 / 9781439871737

    • Hardcover

    Anbieter: GreatBookPricesUK, Woodford Green, Vereinigtes KönigreichGreatBookPricesUK

    Verkäufer/-in mit 5 Sternen
    Verkäufer/-in kontaktieren

    Zustand: Gebraucht - Wie neu

    EUR 265,21

    EUR 18,00 Versand 
    Versand von Vereinigtes Königreich nach USA

    Anzahl: 10 verfügbar

    Zustand: As New. Unread book in perfect condition.

  • Sprache: Englisch

    Verlag: Springer, 2016

    9811011583 / 9789811011580

    Serie: Buch 39 von 110 - Engineering Materials

    • Softcover

    Anbieter: preigu, Osnabrück, Deutschlandpreigu

    Verkäufer/-in mit 5 Sternen
    Verkäufer/-in kontaktieren

    Zustand: Neu

    EUR 212,10

    EUR 70,00 Versand 
    Versand von Deutschland nach USA

    Anzahl: 5 verfügbar

    Taschenbuch. Zustand: Neu. Auxetic Materials and Structures | Teik-Cheng Lim | Taschenbuch | Engineering Materials | xv | Englisch | 2016 | Springer | EAN 9789811011580 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu. …

  • Sprache: Englisch

    Verlag: CRC Press, 2010

    1439807361 / 9781439807361

    • Hardcover

    Anbieter: GreatBookPricesUK, Woodford Green, Vereinigtes KönigreichGreatBookPricesUK

    Verkäufer/-in mit 5 Sternen
    Verkäufer/-in kontaktieren

    Zustand: Gebraucht - Wie neu

    EUR 280,51

    EUR 18,00 Versand 
    Versand von Vereinigtes Königreich nach USA

    Anzahl: 10 verfügbar

    Zustand: As New. Unread book in perfect condition.

  • Sprache: Englisch

    Verlag: CRC Press, 2010

    1439807361 / 9781439807361

    • Hardcover

    Anbieter: Kennys Bookstore, Olney, MD, USAKennys Bookstore

    Verkäufer/-in mit 5 Sternen
    Verkäufer/-in kontaktieren

    Zustand: Neu

    EUR 297,55

    EUR 9,41 Versand 
    Versand innerhalb von USA

    Anzahl: 10 verfügbar

    Zustand: New. Editor(s): Lim, Teik-Cheng. Num Pages: 334 pages, 119 black & white illustrations, 11 black & white tables. BIC Classification: TBN; TDPB; TGM. Category: (UP) Postgraduate, Research & Scholarly. Dimension: 241 x 161 x 21. Weight in Grams: 642. . 2010. 1st Edition. hardcover. . . . . Books ship from the US and Ireland. …

  • Sprache: Englisch

    Verlag: Springer Nature, 2020

    9811564450 / 9789811564451

    Serie: Buch 84 von 110 - Engineering Materials

    • Hardcover

    Anbieter: Revaluation Books, Exeter, Vereinigtes KönigreichRevaluation Books

    Verkäufer/-in mit 5 Sternen
    Verkäufer/-in kontaktieren

    Zustand: Neu

    EUR 293,47

    EUR 18,00 Versand 
    Versand von Vereinigtes Königreich nach USA

    Anzahl: 2 verfügbar

    Hardcover. Zustand: Brand New. 712 pages. 9.25x6.10x9.21 inches. In Stock.

  • Sprache: Englisch

    Verlag: CRC Press, 2012

    1439871736 / 9781439871737

    • Hardcover

    Anbieter: moluna, Greven, Deutschlandmoluna

    Verkäufer/-in mit 5 Sternen
    Verkäufer/-in kontaktieren

    Zustand: Neu

    EUR 254,95

    EUR 48,99 Versand 
    Versand von Deutschland nach USA

    Anzahl: Mehr als 20 verfügbar

    Zustand: New. U. Rajendra Acharya is a visiting faculty member at Ngee Ann Polytechnic in Singapore. His major research interests are in biomedical signal processing, bioimaging, data mining, visualization, and biophysics for better healthcare design..

  • Sprache: Englisch

    Verlag: Springer, 2016

    9811011583 / 9789811011580

    Serie: Buch 39 von 110 - Engineering Materials

    • Softcover

    Anbieter: AHA-BUCH GmbH, Einbeck, DeutschlandAHA-BUCH GmbH

    Verkäufer/-in mit 5 Sternen
    Verkäufer/-in kontaktieren

    Zustand: Neu

    EUR 276,84

    EUR 35,00 Versand 
    Versand von Deutschland nach USA

    Anzahl: 1 verfügbar

    Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - This book lays down the foundation on the mechanics and design of auxetic solids and structures, solids that possess negative Poisson's ratio. It will benefit two groups of readers: (a) industry practitioners, such as product and structural designers, who need to control mechanical stress distributions using auxetic materials, and (b) academic researchers and students who intend to produce unique mechanical and other physical properties of structures using auxetic materials.…

  • Sprache: Englisch

    Verlag: Springer, 2015

    9812872744 / 9789812872746

    Serie: Buch 39 von 110 - Engineering Materials

    • Hardcover

    Anbieter: AHA-BUCH GmbH, Einbeck, DeutschlandAHA-BUCH GmbH

    Verkäufer/-in mit 5 Sternen
    Verkäufer/-in kontaktieren

    Zustand: Neu

    EUR 276,84

    EUR 42,08 Versand 
    Versand von Deutschland nach USA

    Anzahl: 1 verfügbar

    Buch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - This book lays down the foundation on the mechanics and design of auxetic solids and structures, solids that possess negative Poisson's ratio. It will benefit two groups of readers: (a) industry practitioners, such as product and structural designers, who need to control mechanical stress distributions using auxetic materials, and (b) academic researchers and students who intend to produce unique mechanical and other physical properties of structures using auxetic materials.…

  • Sprache: Englisch

    Verlag: CRC Pr I Llc, 2010

    1439807361 / 9781439807361

    • Hardcover

    Anbieter: Revaluation Books, Exeter, Vereinigtes KönigreichRevaluation Books

    Verkäufer/-in mit 5 Sternen
    Verkäufer/-in kontaktieren

    Zustand: Neu

    EUR 316,02

    EUR 15,00 Versand 
    Versand von Vereinigtes Königreich nach USA

    Anzahl: 1 verfügbar

    Hardcover. Zustand: Brand New. 1st edition. 334 pages. 9.37x6.50x0.94 inches. In Stock.