stefano rizzi (23 Ergebnisse)

Paperback. Zustand: Very Good. No Jacket. Former library book; May have limited writing in cover pages. Pages are unmarked. ~ ThriftBooks: Read More, Spend Less.

Zustand: Good. 1st Edition. Former library copy. Pages intact with minimal writing/highlighting. The binding may be loose and creased. Dust jackets/supplements are not included. Includes library markings. Stock photo provided. Product includes identifying sticker. Better World Books: Buy Books. Do Good.

Zustand: Good. 1st Edition. Pages intact with minimal writing/highlighting. The binding may be loose and creased. Dust jackets/supplements are not included. Stock photo provided. Product includes identifying sticker. Better World Books: Buy Books. Do Good.

Softcover. First Edition. A near fine copy. In the Italian language.; 16 x 21 cm; 98 pages.

Zustand: NEW.

Zustand: New. In.

Zustand: New. In.

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - This book constitutes the thoroughly refereed short papers, workshops and doctoral consortium papers of the 21th European Conference on Advances in Databases and Information Systems, ADBIS 2017, held in Nicosia, Cyprus, in September 2017. The 25 full and 4 short workshop papers and the 12 short papers of the main conference were carefully reviewed and selected from 160 submissions. The papers from the following workshops have been included in the proceedings: the first workshop on Data-Driven Approaches for Analyzing and Managing Scholarly Data, AMSD 2017; the first workshop on Novel Techniques for Integrating Big Data, BigNovelTI 2017; the first international workshop on Data Science: Methodologies and Use-Cases, DaS 2017; the second international workshop on Semantic Web for Cultural Heritage, SW4CH 2017.

Paperback. Zustand: Brand New. 434 pages. 9.00x6.00x1.00 inches. In Stock.

Taschenbuch. Zustand: Neu. New Trends in Databases and Information Systems | ADBIS 2017 Short Papers and Workshops, AMSD, BigNovelTI, DAS, SW4CH, DC, Nicosia, Cyprus, September 24-27, 2017, Proceedings | M¿r¿te Kirikova (u. a.) | Taschenbuch | xvi | Englisch | 2017 | Springer | EAN 9783319671611 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu.

Zustand: Sehr gut. Zustand: Sehr gut | Seiten: 480 | Sprache: Englisch | Produktart: Bücher | Publisher's Note: Products purchased from Third Party sellers are not guaranteed by the publisher for quality, authenticity, or access to any online entitlements included with the product.Foreword by Mark Stephen LaRow, Vice President of Products, MicroStrategy"A unique and authoritative book that blends recent research developments with industry-level practices for researchers, students, and industry practitioners."Il-Yeol Song, Professor, College of Information Science and Technology, Drexel University.

Zustand: Sehr gut. Zustand: Sehr gut | Seiten: 480 | Sprache: Englisch | Produktart: Bücher | Publisher's Note: Products purchased from Third Party sellers are not guaranteed by the publisher for quality, authenticity, or access to any online entitlements included with the product.Foreword by Mark Stephen LaRow, Vice President of Products, MicroStrategy"A unique and authoritative book that blends recent research developments with industry-level practices for researchers, students, and industry practitioners."Il-Yeol Song, Professor, College of Information Science and Technology, Drexel University.

Taschenbuch. Zustand: Neu. Design Tools and Methods in Industrial Engineering IV | Proceedings of the Fourth International Conference on Design Tools and Methods in Industrial Engineering, ADM 2024, September 11-13, 2024, Palermo, Italy, Volume 1 | Paolo Di Stefano (u. a.) | Taschenbuch | Lecture Notes in Mechanical Engineering | xxi | Englisch | 2025 | Springer | EAN 9783031765964 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu.

Taschenbuch. Zustand: Neu. Design Tools and Methods in Industrial Engineering V | Proceedings of the Fifth International Conference on Design Tools and Methods in Industrial Engineering, ADM 2025, September 3-5, 2025, Genova, Italy, Volume 1 | Giovanni Berselli (u. a.) | Taschenbuch | Lecture Notes in Mechanical Engineering | xx | Englisch | 2026 | Springer | EAN 9783032149527 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu.

Taschenbuch. Zustand: Neu. Design Tools and Methods in Industrial Engineering V | Proceedings of the Fifth International Conference on Design Tools and Methods in Industrial Engineering, ADM 2025, September 3-5, 2025, Genova, Italy, Volume 2 | Giovanni Berselli (u. a.) | Taschenbuch | xx | Englisch | 2026 | Springer | EAN 9783032149497 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu.

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - This book gathers original peer-reviewed papers reporting on innovative methods and tools in design, modeling, simulation and optimization, and their applications in engineering design, manufacturing, and other relevant industrial sectors. Based on contributions to the Fourth International Conference on Design Tools and Methods in Industrial Engineering, ADM 2024, held on September 11-13, 2024, in Palermo, Italy, and organized by the Italian Association of Design Methods and Tools for Industrial Engineering, and the Department of Engineering of the University of Palermo, this first volume of a 2-volume set focuses on advances indesign for additive manufacturing, product design and engineering, design for sustainability and ecoDesign, experimental methods in product development and integrated methods for product and process design. Further topics include: simulation, analysis and optimization, design of collaborative and soft robots, geometrical product specification and tolerancing, and design methods for mobility. This book provides academics and professionals with a timely overview and extensive information on trends and technologies in industrial design and manufacturing.

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - This book gathers original peer-reviewed papers reporting on innovative methods and tools in design, modeling, simulation and optimization, and their applications in engineering design, manufacturing, and other relevant industrial sectors. Based on contributions to the Fifth International Conference on Design Tools and Methods in Industrial Engineering, ADM 2025, held on September 3 5, 2025, in Genova, Italy, and organized by the Italian Association of Design Methods and Tools for Industrial Engineering, this first volume of a 2-volume set focuses on advances in design for additive manufacturing, product design and engineering, design for sustainability and ecoDesign. Further topics include geometric dimensioning, tolerancing, and inspection, and engineering education. All in all, this book provides academics and professionals with a timely overview and extensive information on trends and technologies in industrial design and manufacturing.

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - This book gathers original peer-reviewed papers reporting on innovative methods and tools in design, modeling, simulation and optimization, and their applications in engineering design, manufacturing, and other relevant industrial sectors. Based on contributions to the Fourth International Conference on Design Tools and Methods in Industrial Engineering, ADM 2024, held on September 11-13, 2024, in Palermo, Italy, and organized by the Italian Association of Design Methods and Tools for Industrial Engineering, and the Department of Engineering of the University of Palermo, this second volume of a 2-volume set focuses on engineering methods in medicine, human factors and ergonomics, and reverse engineering. Further topics include: digital acquisition, image processing and inspection, virtual and augmented reality, virtual prototyping and digital twin, as well as engineering education, and knowledge and product data management. All in all, this book provides academics and professionals with a timely overview and extensive information on trends and technologies in industrial design and manufacturing.

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - This book gathers original peer-reviewed papers reporting on innovative methods and tools in design, modeling, simulation and optimization, and their applications in engineering design, manufacturing, and other relevant industrial sectors. Based on contributions to the Fifth International Conference on Design Tools and Methods in Industrial Engineering, ADM 2025, held on September 3 5, 2025, in Genova, Italy, and organized by the Italian Association of Design Methods and Tools for Industrial Engineering, this second volume of a 2-volume set focuses on design methods for medical and other applications, human factors and ergonomics, image processing and 3D technologies. It also covers advances in virtual and augmented reality, virtual prototyping and digital twins, and 3D models and geometric processing. All in all, this book provides academics and professionals with a timely overview and extensive information on trends and technologies in industrial design and manufacturing.

Paperback. Zustand: Brand New. 558 pages. 9.25x6.10x9.23 inches. In Stock.

Paperback. Zustand: Brand New. 593 pages. 6.14x1.21x9.21 inches. In Stock.

Zustand: Sehr gut. Zustand: Sehr gut | Seiten: 440 | Sprache: Italienisch | Produktart: Bücher | Keine Beschreibung verfügbar.

No Binding. Zustand: Near Fine. 1st Edition. Halle (Salle), East Germany: UNI/vers (;), 1994. Assembling edited by Guillermo Deisler from his home in East Germany from 1987-1995. Each issue is an edition of 100, each artist contributing receiving an issue. Any mistakes are my own, consultation of Deisler s 5 Jahre 5 Years Peacedream-Project UNI/vers (;) (1987-1992) has not corrected my own failings at reading certain handwriting. Issue 33 comes enclosed in a shallow cardboard box with a string affixed to front, 31 hand stamped in red and a UNI/vers (;) pastedown as well as stickers. Present is an index sheet. 44 Works present, many hand stamped, hand signed, hand altered, etc by: Gregorio Borchenko, Cesar Figueiredo, Karla Sachse, Willie Marlowe, Litsa Kaschau-Spathi, Pat Collins, M.B. Corbet, Ralf Langer, Stefano Schiavaoni, Hartmut Graf, W. Mark, Norbert Klassen, Royston du Maurier-Lebek, Valentine Verhaeghe, Siggi Liersch, Henning Mittendorf, Paulo Bruscky, Bruno Chiarlone, Toner Works, Jurgen O. Olbrich, Pedro Juan Gutierrez, Jurgen Kierspel, Pete Spence, Hartmut Andryczuk, ART-NO DOMAIN, Antonio Gomez, Andreas & Theo Breuer, Franco Santini, Carlos Montes de Oca, Christian Bedor, Thomas Wingrich, Hans-Ulrich Prautzsch, Corpa, R. Axel Westphal, Magda Lagerwerf, Clemente Padin, Alberto Rizzi, Virginia M. Raimondi, and Guillermo Deisler. Cover by Berchenko, Langer, Kierspel, Stagel, Dahl, Jacob, & Deisler. Signed by Illustrator(s).