Samuel bernier (16 Ergebnisse)
- Softcover
Anbieter: World of Books (was SecondSale), Montgomery, IL, USAWorld of Books (was SecondSale)
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Gebraucht - Gut
EUR 5,82
Versand gratisVersand innerhalb von USAAnzahl: 1 verfügbar
Zustand: Very Good. Item in very good condition! Textbooks may not include supplemental items i.e. CDs, access codes etc.
- Softcover
Anbieter: World of Books (was SecondSale), Montgomery, IL, USAWorld of Books (was SecondSale)
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Gebraucht - Befriedigend
EUR 5,82
Versand gratisVersand innerhalb von USAAnzahl: 2 verfügbar
Zustand: Good. Item in good condition. Textbooks may not include supplemental items i.e. CDs, access codes etc.
- Softcover
Anbieter: Better World Books: West, Reno, NV, USABetter World Books: West
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Gebraucht - Gut
EUR 6,00
Versand gratisVersand innerhalb von USAAnzahl: 1 verfügbar
Zustand: Very Good. Former library copy. Pages intact with possible writing/highlighting. Binding strong with minor wear. Dust jackets/supplements may not be included. Includes library markings. Stock photo provided. Product includes identifying sticker. Better World Books: Buy Books. Do Good.
- Softcover
Anbieter: Better World Books, Mishawaka, IN, USABetter World Books
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Gebraucht - Befriedigend
EUR 6,00
Versand gratisVersand innerhalb von USAAnzahl: 1 verfügbar
Zustand: Good. Pages intact with minimal writing/highlighting. The binding may be loose and creased. Dust jackets/supplements are not included. Stock photo provided. Product includes identifying sticker. Better World Books: Buy Books. Do Good.
- Softcover
Anbieter: Better World Books, Mishawaka, IN, USABetter World Books
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Gebraucht - Befriedigend
EUR 6,00
Versand gratisVersand innerhalb von USAAnzahl: 1 verfügbar
Zustand: Good. Former library copy. Pages intact with minimal writing/highlighting. The binding may be loose and creased. Dust jackets/supplements are not included. Includes library markings. Stock photo provided. Product includes identifying sticker. Better World Books: Buy Books. Do Good.
- Softcover
Anbieter: PBShop.store US, Wood Dale, IL, USAPBShop.store US
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 18,20
Versand gratisVersand innerhalb von USAAnzahl: 15 verfügbar
PAP. Zustand: New. New Book. Shipped from UK. Established seller since 2000.
- Softcover
Anbieter: PBShop.store UK, Fairford, GLOS, Vereinigtes KönigreichPBShop.store UK
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 16,59
EUR 4,87 VersandVersand von Vereinigtes Königreich nach USAAnzahl: 15 verfügbar
PAP. Zustand: New. New Book. Shipped from UK. Established seller since 2000.
- Softcover
Anbieter: WorldofBooks, Goring-By-Sea, WS, Vereinigtes KönigreichWorldofBooks
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Gebraucht - Gut
EUR 14,97
EUR 6,55 VersandVersand von Vereinigtes Königreich nach USAAnzahl: 4 verfügbar
Paperback. Zustand: Very Good. France's Le FabShop has extensive experience testing 3D printers and creating digital models for them. From an articulated Makey Robot to a posable elephant model, Samuel N. Bernier and the rest of Le FabShop's team have created some of the most-printed designs in the 3D printing world. This book u…ses their work to teach you how to get professional results out of a desktop 3D printer without needing to be trained in design. Through a series of tutorials and case studies, this book gives you the techniques to turn a product idea into a 3D model and a prototype. Focusing on free design software and affordable technologies, the exercises in this book are the perfect boost to any beginner looking to start designing for 3D printing. Designing for the tool and finding a good tool to fit the design--these are at the core of the product designer's job, and these are the tools this book will help you master. Foreword by Carl Bass, Autodesk's CEO, a passionate and prolific Maker.In Design For 3D Printing, you'll: Learn the different 3D printing technologies Choose the best desktop 3D printer Discover free 3D modeling software Become familiar with 3D scanning solutions Find out how to go from a bad to a good 3D source file, one that's ready-to-print. The book has been read, but is in excellent condition. Pages are intact and not marred by notes or highlighting. The spine remains undamaged.
- Softcover
Anbieter: Majestic Books, Hounslow, Vereinigtes KönigreichMajestic Books
Verkäufer/-in kontaktierenVerkäufer/-in mit 4 SternenZustand: Neu
EUR 23,29
EUR 7,61 VersandVersand von Vereinigtes Königreich nach USAAnzahl: 3 verfügbar
Zustand: New. pp. 12+ years.
- Softcover
Anbieter: Ria Christie Collections, Uxbridge, Vereinigtes KönigreichRia Christie Collections
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 19,27
EUR 14,02 VersandVersand von Vereinigtes Königreich nach USAAnzahl: 1 verfügbar
Zustand: New. In.
- Softcover
Anbieter: Revaluation Books, Exeter, Vereinigtes KönigreichRevaluation Books
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 22,95
EUR 11,70 VersandVersand von Vereinigtes Königreich nach USAAnzahl: 2 verfügbar
Paperback. Zustand: Brand New. 1st edition. 160 pages. 9.75x7.75x0.25 inches. In Stock.
- Softcover
Anbieter: Kennys Bookstore, Olney, MD, USAKennys Bookstore
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 30,61
EUR 9,10 VersandVersand innerhalb von USAAnzahl: 1 verfügbar
Zustand: New. Through a series of tutorials and case studies, this book gives you the techniques to turn a product idea into a 3D model and a prototype. Focusing on free design software and affordable technologies, the exercises in this book are the perfect boost to any beginner looking to start designing for 3D printing. Num Pa…ges: 160 pages. BIC Classification: UKS. Category: (G) General (US: Trade). Dimension: 197 x 249 x 13. Weight in Grams: 362. . 2015. 1st Edition. Paperback. . . . . Books ship from the US and Ireland.
- Softcover
Anbieter: Speedyhen, Hertfordshire, Vereinigtes KönigreichSpeedyhen
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 15,90
EUR 47,98 VersandVersand von Vereinigtes Königreich nach USAAnzahl: 1 verfügbar
Zustand: NEW.
- Softcover
Anbieter: moluna, Greven, Deutschlandmoluna
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 22,06
EUR 48,99 VersandVersand von Deutschland nach USAAnzahl: 1 verfügbar
Zustand: New. Through a series of tutorials and case studies, this book gives you the techniques to turn a product idea into a 3D model and a prototype. Focusing on free design software and affordable technologies, the exercises in this book are the perfect boost to any .
- Softcover
Anbieter: AHA-BUCH GmbH, Einbeck, DeutschlandAHA-BUCH GmbH
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 20,23
EUR 61,84 VersandVersand von Deutschland nach USAAnzahl: 1 verfügbar
Taschenbuch. Zustand: Neu. Neuware - France's Le FabShop has extensive experience testing 3D printers and creating digital models for them. From an articulated Makey Robot to a posable elephant model, Samuel N. Bernier and the rest of Le FabShop's team have created some of the most-printed designs in the 3D printing world. This…book uses their work to teach you how to get professional results out of a desktop 3D printer without needing to be trained in design. Through a series of tutorials and case studies, this book gives you the techniques to turn a product idea into a 3D model and a prototype. Focusing on free design software and affordable technologies, the exercises in this book are the perfect boost to any beginner looking to start designing for 3D printing.Designing for the tool and finding a good tool to fit the design--these are at the core of the product designer's job, and these are the tools this book will help you master.Foreword by Carl Bass, Autodesk's CEO, a passionate and prolific Maker.In Design For 3D Printing, you'll:- Learn the different 3D printing technologies- Choose the best desktop 3D printer- Discover free 3D modeling software- Become familiar with 3D scanning solutions- Find out how to go from a bad to a good 3D source file, one that's ready-to-print.
- Softcover
Anbieter: RECYCLIVRE, Paris, FrankreichRECYCLIVRE
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Gebraucht - Gut bis sehr gut
EUR 10,40
EUR 65,00 VersandVersand von Frankreich nach USAAnzahl: 1 verfügbar
Zustand: Bon. Merci, votre achat aide à financer des programmes de lutte contre l'illettrisme.
