Roy m mortier (10 Ergebnisse)
- Hardcover
Anbieter: Anybook.com, Lincoln, Vereinigtes KönigreichAnybook.com
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Gebraucht - Befriedigend
EUR 77,25
EUR 15,83 VersandVersand von Vereinigtes Königreich nach USAAnzahl: 1 verfügbar
Zustand: Good. This is an ex-library book and may have the usual library/used-book markings inside.This book has hardback covers. In good all round condition. Dust jacket in good condition. Please note the Image in this listing is a stock photo and may not match the covers of the actual item,850grams, ISBN:0216929210.
- Hardcover
Anbieter: Revaluation Books, Exeter, Vereinigtes KönigreichRevaluation Books
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 140,10
EUR 14,55 VersandVersand von Vereinigtes Königreich nach USAAnzahl: 2 verfügbar
Hardcover. Zustand: Brand New. 324 pages. 6.14x0.75x9.21 inches. In Stock.
- Hardcover
Anbieter: moluna, Greven, Deutschlandmoluna
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 105,14
EUR 48,99 VersandVersand von Deutschland nach USAAnzahl: Mehr als 20 verfügbar
Zustand: New. InhaltsverzeichnisHistorical review, D.Dowson traditional base oils, D.A.Roberts synthetic base oils, R.M.Mortier dispersants/detergents, C.C.Colyer and W.C.Gergel extreme pressure and antiwear additives, I.Goldblatt and F.Lockwoode.
- Hardcover
Anbieter: AHA-BUCH GmbH, Einbeck, DeutschlandAHA-BUCH GmbH
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 133,35
EUR 30,50 VersandVersand von Deutschland nach USAAnzahl: 2 verfügbar
Buch. Zustand: Neu. Neuware - 1 Base oils from petroleum.- 1.1 Introduction.- 1.2 Base oil composition.- 1.2.1 Components of crude oil.- 1.2.2 Characteristics of the hydrocarbons for lubricant performance.- 1.2.3 Crude oil selection for base oil manufacture.- 1.3 Products and specifications.- 1.3.1 Physical properties.- 1.3.2 Ch…emical properties.- 1.3.3 Base oil categories.- 1.4 Conventional base oil manufacturing methods.- 1.4.1 Historic methods.- 1.4.2 Base oil manufacture in a modern refinery.- 1.4.3 Base oil production economics.- 1.4.4 Distillation.- 1.4.5 De-asphalting.- 1.4.6 Solvent extraction.- 1.4.7 Solvent de-waxing.- 1.4.8 Finishing.- 1.5 Modern catalytic processes.- 1.5.1 Severe hydro treatment.- 1.5.2 Special base oils from hydrocracking.- 1.5.3 Special base oils by wax isomerisation.- 1.5.4 Catalytic de-waxing.- 1.6 Future developments.- References.- 2 Synthetic base fluids.- 2.1 Introduction.- 2.2 Polyalphaolefins.- 2.2.1 Free radical oligomerisation.- 2.2.2 Ziegler catalysed oligomerisation.- 2.2.3 Friedel-Crafts catalysed oligomerisation.- 2.3 Alkylated aromatics.- 2.3.1 Introduction.- 2.3.2 Production and general properties.- 2.3.3 Applications.- 2.4 Polybutenes.- 2.4.1 Introduction.- 2.4.2 Production and general chemical properties.- 2.4.3 Application of PIB fluids.- 2.5 Synthetic esters.- 2.5.1 Introduction.- 2.5.2 Ester types.- 2.5.3 Manufacture of esters.- 2.5.4 Physicochemical properties of ester lubricants.- 2.5.5 Application areas.- 2.5.6 Future trends.- 2.6 Polyalkylene glycols.- 2.6.1 Introduction.- 2.6.2 Production.- 2.6.3 Chemistry.- 2.6.4 Key properties.- 2.6.5 Applications.- 2.7 Phosphate esters.- 2.7.1 Introduction.- 2.7.2 Manufacture.- 2.7.3 Physical and chemical properties.- 2.7.4 Applications.- References.- 3 Detergents/dispersants.- 3.1 Introduction.- 3.2 Detergents.- 3.2.1 Sulfonates.- 3.2.2 Phenates/salicylates/phosphonates.- 3.2.3 Detergent classification.- 3.3 Dispersants.- 3.4 Other lubricants.- 3.4.1 Automatic transmission fluids (ATFs).- 3.4.2 Gear lubricants.- 3.4.3 Tractor hydraulic oils.- 3.5 Performance evaluation.- References.- Further reading.- 4 Oxidative degradation and stabilisation of mineral oil based lubricants.- 4.1 Introduction.- 4.2 Autoxidation of hydrocarbons.- 4.2.1 Oxidation of hydrocarbons at low temperature (30-120°C).- 4.2.2 Oxidation of hydrocarbons at high temperature (> 120°C).- 4.2.3 Metal catalysed autoxidation of hydrocarbons.- 4.3 Oxidation stability of base oils.- 4.4 Inhibition of oxidative degradation of lubricants.- 4.4.1 Radical scavengers.- 4.4.2 Hydroperoxide decomposers.- 4.4.3 Multifunctional additives.- 4.4.4 Synergism between antioxidants.- 4.5 Application of antioxidants.- 4.5.1 Industrial lubricants.- 4.5.2 Engine oil.- 4.6 Future antioxidant technology.- 4.6.1 Antioxidants for industrial lubricants.- 4.6.2 Antioxidants for engine oils.- Acknowledgements.- References.- 5 Viscosity index improvers and thickeners.- 5.1 Introduction.- 5.2 Overview of VI improver chemistry.- 5.3 Chemistry and manufacture of commercial VI improvers.- 5.3.1 Polymethacrylates.- 5.3.2 Olefin copolymers.- 5.3.3 Hydrogenated styrene-diene copolymers.- 5.3.4 Styrene polyester.- 5.3.5 Concentrate-compatible PMA/OCP blends.- 5.4 Function and properties.- 5.4.1 Solution properties.- 5.4.2 Mechanism offunction.- 5.4.3 Shear stability.- 5.4.4 Thermal-oxidative stability.- 5.5 Performance.- 5.5.1 Low temperature viscosity.- 5.5.2 High temperature viscosity.- 5.5.3 Deposits.- 5.6 Prognosis for future developments.- References.- 6 Miscellaneous additives.- 6.1 Friction modifiers.- 6.1.1 Introduction.- 6.1.2 Friction and lubricating regimes.- 6.1.3 Friction modifier mechanisms.- 6.1.4 Chemical aspects of friction modifiers.- 6.2 Pour point depressants.- 6.2.1 Low temperature operations.- 6.2.2 Mechanism of pour point depressants.- 6.2.3 Pour point depressant additives.- 6.3 Demulsifiers and antifoams.- 6.3.1 Introduction.- 6.3.2 Emulsion stabilisation.- 6.3.3 Demulsification.- 6.3.4 Demulsifiers.- 6.3.5 Fo.
- Hardcover
Anbieter: AHA-BUCH GmbH, Einbeck, DeutschlandAHA-BUCH GmbH
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 143,70
EUR 30,50 VersandVersand von Deutschland nach USAAnzahl: 2 verfügbar
Buch. Zustand: Neu. Neuware - 1 Base oils from petroleum.- 1.1 Introduction.- 1.2 Base oil composition.- 1.2.1 Components of crude oil.- 1.2.2 Characteristics of the hydrocarbons for lubricant performance.- 1.2.3 Crude oil selection for base oil manufacture.- 1.3 Products and specifications.- 1.3.1 Physical properties.- 1.3.2 Ch…emical properties.- 1.3.3 Base oil categories.- 1.4 Conventional base oil manufacturing methods.- 1.4.1 Historic methods.- 1.4.2 Base oil manufacture in a modern refinery.- 1.4.3 Base oil production economics.- 1.4.4 Distillation.- 1.4.5 De-asphalting.- 1.4.6 Solvent extraction.- 1.4.7 Solvent de-waxing.- 1.4.8 Finishing.- 1.5 Modern catalytic processes.- 1.5.1 Severe hydrotreatment.- 1.5.2 Special base oils from hydrocracking.- 1.5.3 Special base oils by wax isomerisation.- 1.5.4 Catalytic de-waxing.- 1.6 Future developments.- References.- 2 Synthetic base fluids.- 2.1 Introduction.- 2.2 Polyalphaolefins.- 2.2.1 Free radical oligomerisation.- 2.2.2 Ziegler catalysed oligomerisation.- 2.2.3 Friedel-Crafts catalysed oligomerisation.- 2.3 Alkylated aromatics.- 2.3.1 Introduction.- 2.3.2 Production and general properties.- 2.3.3 Applications.- 2.4 Polybutenes.- 2.4.1 Introduction.- 2.4.2 Production and general chemical properties.- 2.4.3 Application of PIB fluids.- 2.5 Synthetic esters.- 2.5.1 Introduction.- 2.5.2 Ester types.- 2.5.3 Manufacture of esters.- 2.5.4 Physicochemical properties of ester lubricants.- 2.5.5 Application areas.- 2.5.6 Future trends.- 2.6 Polyalkylene glycols.- 2.6.1 Introduction.- 2.6.2 Production.- 2.6.3 Chemistry.- 2.6.4 Key properties.- 2.6.5 Applications.- 2.7 Phosphate esters.- 2.7.1 Introduction.- 2.7.2 Manufacture.- 2.7.3 Physical and chemical properties.- 2.7.4 Applications.- References.- 3 Detergents/dispersants.- 3.1 Introduction.- 3.2 Detergents.- 3.2.1 Sulfonates.- 3.2.2 Phenates/salicylates/phosphonates.- 3.2.3 Detergent classification.- 3.3 Dispersants.- 3.4 Other lubricants.- 3.4.1 Automatic transmission fluids (ATFs).- 3.4.2 Gear lubricants.- 3.4.3 Tractor hydraulic oils.- 3.5 Performance evaluation.- References.- Further reading.- 4 Oxidative degradation and stabilisation of mineral oil based lubricants.- 4.1 Introduction.- 4.2 Autoxidation of hydrocarbons.- 4.2.1 Oxidation of hydrocarbons at low temperature (30-120°C).- 4.2.2 Oxidation of hydrocarbons at high temperature (> 120°C).- 4.2.3 Metal catalysed autoxidation of hydrocarbons.- 4.3 Oxidation stability of base oils.- 4.4 Inhibition of oxidative degradation of lubricants.- 4.4.1 Radical scavengers.- 4.4.2 Hydroperoxide decomposers.- 4.4.3 Multifunctional additives.- 4.4.4 Synergism between antioxidants.- 4.5 Application of antioxidants.- 4.5.1 Industrial lubricants.- 4.5.2 Engine oil.- 4.6 Future antioxidant technology.- 4.6.1 Antioxidants for industrial lubricants.- 4.6.2 Antioxidants for engine oils.- Acknowledgements.- References.- 5 Viscosity index improvers and thickeners.- 5.1 Introduction.- 5.2 Overview of VI improver chemistry.- 5.3 Chemistry and manufacture of commercial VI improvers.- 5.3.1 Polymethacrylates.- 5.3.2 Olefin copolymers.- 5.3.3 Hydrogenated styrene-diene copolymers.- 5.3.4 Styrene polyester.- 5.3.5 Concentrate-compatible PMA/OCP blends.- 5.4 Function and properties.- 5.4.1 Solution properties.- 5.4.2 Mechanism of function.- 5.4.3 Shear stability.- 5.4.4 Thermal-oxidative stability.- 5.5 Performance.- 5.5.1 Low temperature viscosity.- 5.5.2 High temperature viscosity.- 5.5.3 Deposits.- 5.6 Prognosis for future developments.- References.- 6 Miscellaneous additives.- 6.1 Friction modifiers.- 6.1.1 Introduction.- 6.1.2 Friction and lubricating regimes.- 6.1.3 Friction modifier mechanisms.- 6.1.4 Chemical aspects of friction modifiers.- 6.2 Pour point depressants.- 6.2.1 Low temperature operations.- 6.2.2 Mechanism of pour point depressants.- 6.2.3 Pour point depressant additives.- 6.3 Demulsifiers and antifoams.- 6.3.1 Introduction.- 6.3.2 Emulsion stabilisation.- 6.3.3 Demulsification.- 6.3.4 Demulsifiers.- 6.3.5 Fo.
- Hardcover
Anbieter: Ria Christie Collections, Uxbridge, Vereinigtes KönigreichRia Christie Collections
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 435,32
EUR 13,94 VersandVersand von Vereinigtes Königreich nach USAAnzahl: Mehr als 20 verfügbar
Zustand: New. In.
- Softcover
Anbieter: Ria Christie Collections, Uxbridge, Vereinigtes KönigreichRia Christie Collections
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 435,32
EUR 13,94 VersandVersand von Vereinigtes Königreich nach USAAnzahl: Mehr als 20 verfügbar
Zustand: New. In.
Chemistry and Technology of Lubricants
Mortier, Roy M. (Editor)/ Orszulik, Stefan T. (Editor)/ Fox, Malcolm F. (Editor)
- Hardcover
Anbieter: Revaluation Books, Exeter, Vereinigtes KönigreichRevaluation Books
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 814,40
EUR 17,46 VersandVersand von Vereinigtes Königreich nach USAAnzahl: 2 verfügbar
Hardcover. Zustand: Brand New. 3rd ed. edition. 560 pages. 9.50x6.25x1.25 inches. In Stock.
- Softcover
Anbieter: AHA-BUCH GmbH, Einbeck, DeutschlandAHA-BUCH GmbH
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 623,88
EUR 30,50 VersandVersand von Deutschland nach USAAnzahl: 1 verfügbar
Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - 'Chemistry and Technology of Lubricants' describes the chemistry and technology of base oils, additives and applications of liquid lubricants. This Third Edition reflects how the chemistry and technology of lubricants has developed since the First Ed…ition was published in 1992. The acceleration of performance development in the past 35 years has been as significant as in the previous century: Refinery processes have become more precise in defining the physical and chemical properties of higher quality mineral base oils. New and existing additives have improved performance through enhanced understanding of their action. Specification and testing of lubricants has become more focused and rigorous. 'Chemistry and Technology of Lubricants' is directed principally at those working in the lubricants industry as well as individuals working within academia seeking a chemist's viewpoint of lubrication. It is also of value to engineers and technologists requiring a more fundamental understanding of the subject.
- Hardcover
Anbieter: AHA-BUCH GmbH, Einbeck, DeutschlandAHA-BUCH GmbH
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 625,86
EUR 38,39 VersandVersand von Deutschland nach USAAnzahl: 1 verfügbar
Buch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - 'Chemistry and Technology of Lubricants' describes the chemistry and technology of base oils, additives and applications of liquid lubricants. This Third Edition reflects how the chemistry and technology of lubricants has developed since the First Edition w…as published in 1992. The acceleration of performance development in the past 35 years has been as significant as in the previous century: Refinery processes have become more precise in defining the physical and chemical properties of higher quality mineral base oils. New and existing additives have improved performance through enhanced understanding of their action. Specification and testing of lubricants has become more focused and rigorous. 'Chemistry and Technology of Lubricants' is directed principally at those working in the lubricants industry as well as individuals working within academia seeking a chemist's viewpoint of lubrication. It is also of value to engineers and technologists requiring a more fundamental understanding of the subject.
