radzevich stephen (65 Ergebnisse)

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - Many products are designed with aesthetic sculptured surfaces to enhance their appearance, an important factor in customer satisfaction, especially for automotive and consumer electronics products. In other cases, products have sculptured surfaces to meet functional requirements. Functional surfaces interact with the environment or with other surfaces. Because of this, functional surfaces can also be called dynamic surfaces. Functional surfaces do not possess the property to slide over itself, which causes significant complexity in machining of sculptured surfaces. The application of multiaxis numerically controlled (NC) machines is the only way for an efficient machining of sculptured surfaces. Reduction of machining time is a critical issue when machining sculptured surfaces on multiaxis NC machines. To reduce the machining cost of a sculptured surface, the machining time must be as short as possible.Table of Contents: Introduction / Analytical Representation of Scupltured Surfaces / Kinematics of Sculptured-Surface Machining / Analytical Description of the Geometry of Contact of the Sculptured Surface and of the Generating Surface of the Form-Cutting Tool / Form-Cutting Tools of Optimal Design / Conditions of Proper Sculptured-Surface Generation / Predicted Accuracy of the Machined Sculptured Surface / Optimal Sculptured-Surface Machining.

Hardcover. Zustand: Very Good. 2. Auflage. Unread, with some shelfwear. Immediately dispatched from Germany.

Taschenbuch. Zustand: Neu. CAD/CAM of Sculptured Surfaces on Multi-Axis NC Machine | Stephen P. Radzevich | Taschenbuch | Synthesis Lectures on Engineering, Science, and Technology | x | Englisch | 2008 | Springer | EAN 9783031793110 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu.

Zustand: New. In.

Hardcover. Zustand: Very Good. No Jacket. Former library book; May have limited writing in cover pages. Pages are unmarked. ~ ThriftBooks: Read More, Spend Less.

Zustand: New. This is a Brand-new US Edition. This Item may be shipped from US or any other country as we have multiple locations worldwide.

HRD. Zustand: New. New Book. Shipped from UK. Established seller since 2000.

Zustand: New. This is a Brand-new US Edition. This Item may be shipped from US or any other country as we have multiple locations worldwide.

HRD. Zustand: New. New Book. Shipped from UK. Established seller since 2000.

Zustand: Sehr gut. Zustand: Sehr gut | Seiten: 572 | Sprache: Englisch | Produktart: Bücher | This book presents the most up-to-date accomplishments in gear design and gear production, detailing theory of gearing and its application. As an enormous number of gears are used in such sectors as automobiles, aerospace, machines, and similar industries, even a very small improvement in the gear design or production, for example a 10 cent savings on each gear, can result in huge of savings in manufacturing, underscoring critical importance of the subject of the book. Giving a solid background in theory together with the latest advances in design and production, the book is ideal for product designers working in numerous industries. The volume also serves as a useful supplement to required texts well for students in mechanical and industrial engineering as it helps establish a scientific foundation to the subject, and facilitates a systematic learning process of gear kinematics, gear geometry, gear design, gear production/finishing operations, and related competencies.

Zustand: Hervorragend. Zustand: Hervorragend | Seiten: 572 | Sprache: Englisch | Produktart: Bücher | This book presents the most up-to-date accomplishments in gear design and gear production, detailing theory of gearing and its application. As an enormous number of gears are used in such sectors as automobiles, aerospace, machines, and similar industries, even a very small improvement in the gear design or production, for example a 10 cent savings on each gear, can result in huge of savings in manufacturing, underscoring critical importance of the subject of the book. Giving a solid background in theory together with the latest advances in design and production, the book is ideal for product designers working in numerous industries. The volume also serves as a useful supplement to required texts well for students in mechanical and industrial engineering as it helps establish a scientific foundation to the subject, and facilitates a systematic learning process of gear kinematics, gear geometry, gear design, gear production/finishing operations, and related competencies.

Zustand: New. pp. 264.

Zustand: Hervorragend. Zustand: Hervorragend | Seiten: 332 | Sprache: Englisch | Produktart: Bücher | This updated and expanded edition presents a highly accurate specification for part surface machining. Precise specification reduces the cost of this widely used industrial operation as accurately specified and machined part surfaces do not need to undergo costly final finishing. Dr. Radzevich describes techniques in this volume based primarily on classical differential geometry of surfaces. He then transitions from differential geometry of surfaces to engineering geometry of surfaces, and examines how part surfaces are either machined themselves, or are produced by tools with surfaces that are precisely machined. The book goes on to explain specific methods, such as derivation of planar characteristic curves based on Plücker conoid constructed at a point of the part surface, and that analytical description of part surface is vital for surfaces machined using CNC technology, and especially so for multi-axes NC machines. Providing readers with a powerful tool for analytical description of part surfaces machined on conventional machine tools and numerically controlled machines, this book maximizes understanding on optimal treatment of part surfaces to meet the requirements of today¿s high tech industry.

Zustand: Hervorragend. Zustand: Hervorragend | Seiten: 550 | Sprache: Englisch | Produktart: Bücher | Keine Beschreibung verfügbar.

Zustand: New. This is a Brand-new US Edition. This Item may be shipped from US or any other country as we have multiple locations worldwide.

Zustand: New. In.

Zustand: New. pp. 738.

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - This updated and expanded edition presents a highly accurate specification for part surface machining. Precise specification reduces the cost of this widely used industrial operation as accurately specified and machined part surfaces do not need to undergo costly final finishing. Dr. Radzevich describes techniques in this volume based primarily on classical differential geometry of surfaces. He then transitions from differential geometry of surfaces to engineering geometry of surfaces, and examines how part surfaces are either machined themselves, or are produced by tools with surfaces that are precisely machined. The book goes on to explain specific methods, such as derivation of planar characteristic curves based on Plücker conoid constructed at a point of the part surface, and that analytical description of part surface is vital for surfaces machined using CNC technology, and especially so for multi-axes NC machines. Providing readers with a powerful tool for analytical description of part surfaces machined on conventional machine tools and numerically controlled machines, this book maximizes understanding on optimal treatment of part surfaces to meet the requirements of today's high tech industry.

Zustand: New. In.

Zustand: New. This is a Brand-new US Edition. This Item may be shipped from US or any other country as we have multiple locations worldwide.

Zustand: New.

Taschenbuch. Zustand: Neu. Novikov/Conformal Gearing | Scientific Theory and Practice | Stephen P. Radzevich | Taschenbuch | xxxiii | Englisch | 2023 | Springer International Publishing | EAN 9783031100215 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu.

Paperback. Zustand: Brand New. 493 pages. 9.25x6.10x1.12 inches. In Stock.

Taschenbuch. Zustand: Neu. Generation of Surfaces | Kinematic Geometry of Surface Machining | Stephen P. Radzevich | Taschenbuch | Einband - flex.(Paperback) | Englisch | 2017 | CRC Press | EAN 9781138074439 | Verantwortliche Person für die EU: Libri GmbH, Europaallee 1, 36244 Bad Hersfeld, gpsr[at]libri[dot]de | Anbieter: preigu.

Buch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - This updated and expanded edition presents a highly accurate specification for part surface machining. Precise specification reduces the cost of this widely used industrial operation as accurately specified and machined part surfaces do not need to undergo costly final finishing. Dr. Radzevich describes techniques in this volume based primarily on classical differential geometry of surfaces. He then transitions from differential geometry of surfaces to engineering geometry of surfaces, and examines how part surfaces are either machined themselves, or are produced by tools with surfaces that are precisely machined. The book goes on to explain specific methods, such as derivation of planar characteristic curves based on Plücker conoid constructed at a point of the part surface, and that analytical description of part surface is vital for surfaces machined using CNC technology, and especially so for multi-axes NC machines. Providing readers with a powerful tool for analytical description of part surfaces machined on conventional machine tools and numerically controlled machines, this book maximizes understanding on optimal treatment of part surfaces to meet the requirements of today's high tech industry.

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - This book presents the latest accomplishments inNovikov/conformal gearingas well ashigh-conformal gearing.It is focused primarily on strength calculation of gear teeth and the manufacturing of gears forNovikov/conformalandhigh-conformal gearingalong with a brief discussion of achievements in the modern theory of gearing. The modern theory of gearing is the foundation of all optimal designs of gears, gear-sets, and transmissions of all known designs, as well as, of all those to be developed in the future. As even a small improvement in efficiency on a single gear can represent a significant cost saving, given the millions of gears used in industry every year, this volume provides the design and manufacturing engineer in invaluable resource.

Zustand: New. In.

Zustand: New. In.

Zustand: New.

Paperback. Zustand: Brand New. reprint edition. 698 pages. 9.00x6.25x1.75 inches. In Stock.