R brunetaud (21 Ergebnisse)

Zustand: Good. 680 pp., hardcover, ex library, else text and binding clean and tight. - If you are reading this, this item is actually (physically) in our stock and ready for shipment once ordered. We are not bookjackers. Buyer is responsible for any additional duties, taxes, or fees required by recipient's country.…

Zustand: New. In.

Paperback. Zustand: Brand New. 704 pages. 9.25x6.10x1.59 inches. In Stock.

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - List of Contents.- 1. Advanced High Temperature Materials.- 2. Materials Potential.- 2.1. Alloys.- 2.1.1. High Temperature Steels for Power Plant R.D. Townsend, CERL Leatherhead.- 2.1.2. Developments in Heat-Resisting Alloys for Petrochemical Plant J.J.Jones, Lake&Elliot Paramount Ltd.- 2.1.3. High Temperature, Oxidation-Resisting FeCrAl Steels S.R. Keown, Consultant Metallurgist.- 2.1.4. Superalloys, base: nickel, cobalt, iron and chromium C.H. White, Inco Alloys Ltd.- 2.1.5 Oxide Dispersion Strengthened (ODS) Alloys C.H. White, IncoAlloysLtd.- 2.1.6. Refractory Metals and Alloys Reck, Metallwerk Plansee GmbH.- 2.1.7. Titanium S.F. Pugh, Consultant Metallurgist.- 2.1.8. The Platinum Group Metals S.F. Pugh, Consultant Metallurgist.- 2.1.9. Intermetallic Compounds for High Temperature Use P. Costa, ONERA.- 2.2. Coatings.- 2.2.1. Claddings and Co-extruded Tubes T. Flatley, C.W. Morris, CEGB Leeds.- Coatings, Metallic and Ceramic (Thermal Barrier) for Turbine ApplicationsR. Mevrel,ONERA.- 2.3. Composites.- 2.3.1. Metal matrix Composites R. Warren, Chalmers University.- 2.3.2. Ceramic matrix Composites R. Warren, Chalmers University.- 2.4. Ceramics.- 2.4.1. Engineering Ceramics and Pyrolytic Materials D.J. Godfrey, Admiralty Research Establishment.- 2.4.2. Refractories J.T. van Konijnenburg, HoogovensB.V.- 3. Materials Production.- 3.1. Alloys.- 3.1.1. Alloy Production R. Brunetaud, Consultant Metallurgist.- R. Brunetaud, Consultant Metallurgist.- High Temperature Materials S.F. Pugh, Consultant Metallurgist.- 3.2. Ceramics and Refractories.- 3.2.1. Ceramics and Pyrolytic Materials D.J. Godfrey, Admiralty Research Establisment.- 3.2.2. Powder Production for Structural Ceramics F. Cambier, A. Leriche, CRIBC.- 3.3. Composites.- 3.3.1. Metal matrix Composites R. Warren, Chalmers University.- 3.3.2. Ceramic matrix Composites R. Warren, Chalmers University.- 3.4. Joining.- 3.4.1. Joining of Metallic Materials T.G. Gooch, Welding Institute.- 3.4.2. Joining of Advanced Ceramics for High Temperature Applications KM. Ostyn, Research Centre of the Belgian Welding Institute S.D. Peteves, Joint Research Centre, Petten A.C. Vinckier, State University Ghent.- 4. Materials Constraints in the High Temperature Industrial Technologies.- 4.1. Energy Production and Conversion -Fossil Energy.- 4.1.1. The Combustion Technologies D.B. Meadowcroft, CERL Leatherhead.- 4.1.2. Steam Cycle Power Plant D.B. Meadowcroft, CERL Leatherhead.- 4.1.3. Coal Gasification Materials for Plant Construction D.M. Lloyd, British Coal Corporation.- 4.1.4. Fuel Cells K Joon, S.B. v.d. Molen, E.H.P. Cordfunke, Netherlands Energy Centre.- 4.1.5. Magneto-hydrodynamic Energy Conversion F. Negrini, University of Bologna.- 4.2. Materials Constraints in Petrochemical Plant F.J. Vaes, Dow Chemicals B.V.- 4.3. High Temperature Materials Problems in Fusion and Fission Power Generation, S.F. Pugh, Consultant Metallurgist.- 4.4. Engines.- 4.4.1. Aero Gas Turbines S. Newsam, Rolls Royce pic.- 4.4.2. Marine Gas Turbines J.F.G. Conde, Materials Consultant.- 4.4.3. Turbines for Motor Vehicles J.F.G. Conde, Materials Consultant.- 4.4.4. Reciprocating Engines -Diesel- Otto D.J. Godfrey, Admiralty Research Establishment.- 4.6. Materials used in the Processing of Super alloys J. Morlet, Imphy SA.- 4.7. Materials for Sensors to be used at High Temperature O. De Pous, Eniricerche Monterondo.- 4.8. Materials for Furnaces D. Brun, Stein Heurtey SA.- 5. Optimisation of Components.- 5.1. Testing MetrologyM.S. Loveday, National Physical Laboratory.- 5.2. Prior Inspection/NDE W.N. Reynolds, NDT Centre, AERE Harwell.- 5.3. Design of Materials for Components.- 5.3.1. Basic Principles for Modelling of Deformation and Rupture D.R. Hayhurst. Sheffield University.- 5.3.2. Life Prediction and Residual Life Assessment G.W. Greenwood. Sheffield University.- 5.3.3. New Approach to Materials Design. Calculated Phase Equilibria for Composition and Structural Con.…

Taschenbuch. Zustand: Neu. Research and Development of High Temperature Materials for Industry | E. Bullock (u. a.) | Taschenbuch | 680 S. | Englisch | 2011 | Springer | EAN 9789401070089 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu. …

Zustand: Good. 1094 pp., hardcover, ex library, light age toning to edges, else text and binding clean and tight. - If you are reading this, this item is actually (physically) in our stock and ready for shipment once ordered. We are not bookjackers. Buyer is responsible for any additional duties, taxes, or fees required by recipient's country. Photos available upon request. …

Zustand: New. In.

Zustand: New. In.

Zustand: New.

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - The European Collaborative Programme on Materials for Gas Turbines known as COST-50 was initiated in 1971 and has been supported since then by the Commission of European Communities. The achievements made during the first phase of COST-50 were reviewed at the Conference held in Liege, September 25-27, 1978 and published by Applied Science Publishers Ltd. Nine European Countries : Austria, Belgium, the Federal Republic of Germany, France, Italy, The Netherlands, Sweden, Switzerland, the United Kingdom, and the Joint Research Center of the Community, agreed to continue their participation in COST-50 and the results of the second phase were presented at the Conference held in Liege, October 4-6, 1982 under the following headings : - Corrosion and Coatings - Fatigue, Creep and Structural Stability - Processing The technical sessions consisted of invited papers reviewing recent progress in the development of high temperature alloys with particular emphasis on the results of the European Collaborative Programme. Furthermore, some areas were reviewed by eminent speakers from the United States of America, due to their expertise in their respective fields. In this context and as a tradition introduced in 1978, the keynote lecture 'Superalloys technology : today and tomorrow' was del ivered by Dr. F. L. Versnyder. The Conference was completed with a significant Poster Session comprising about fifty contributions from Europe and elsewhere. This book comprises a total of fifty four contributions representing almost all of the papers delivered at the technical sessions and a large part of the presentations made at the Poster Session.…

Zustand: New.

Paperback. Zustand: Brand New. 1100 pages. 9.21x6.14x2.16 inches. In Stock.

Buch. Zustand: Neu. Neuware - The European Collaborative Programme on Materials for Gas Turbines known as COST-50 was initiated in 1971 and has been supported since then by the Commission of European Communities. The achievements made during the first phase of COST-50 were reviewed at the Conference held in Liege, September 25-27, 1978 and published by Applied Science Publishers Ltd. Nine European Countries : Austria, Belgium, the Federal Republic of Germany, France, Italy, The Netherlands, Sweden, Switzerland, the United Kingdom, and the Joint Research Center of the Community, agreed to continue their participation in COST-50 and the results of the second phase were presented at the Conference held in Liege, October 4-6, 1982 under the following headings : - Corrosion and Coatings - Fatigue, Creep and Structural Stability - Processing The technical sessions consisted of invited papers reviewing recent progress in the development of high temperature alloys with particular emphasis on the results of the European Collaborative Programme. Furthermore, some areas were reviewed by eminent speakers from the United States of America, due to their expertise in their respective fields. In this context and as a tradition introduced in 1978, the keynote lecture 'Superalloys technology : today and tomorrow' was del ivered by Dr. F. L. Versnyder. The Conference was completed with a significant Poster Session comprising about fifty contributions from Europe and elsewhere. This book comprises a total of fifty four contributions representing almost all of the papers delivered at the technical sessions and a large part of the presentations made at the Poster Session.…

Zustand: New.

Zustand: New.

Zustand: New. In.

Zustand: New. In.

Hardcover. Zustand: Brand New. 858 pages. 10.00x7.00x1.75 inches. In Stock.

Hardcover. Zustand: Brand New. 1st edition. 832 pages. 9.30x6.30x3.60 inches. In Stock.

Buch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - Proceedings of a Conference held in Liège, Belgium, October 6-9, 1986.

Buch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - Proceedings of a Conference held in Liège, Belgium, September 24-27, 1990.