pineau andré (64 Ergebnisse)

Issoudun, Paris, 1934. Broché. 448 pp. Ills. Dos renforcé. Ex. non rogné. Cachet.

447pp.avec ills.hors-texte, relié en couvert.cart.avec plats marbrés et dos en toile, qqs.cachets, bon état.

8°. 447 S. Halbleinen, Bibliotheksexemplar mit Rückenschild und Stempeln, mit montiertem Rückentitel der Originalbroschur, Einband leicht berieben, Seitenschnitt mit Fleck, Papier stark gebräunt, sonst ordentliches Exemplar. Sprache: Französisch Gewicht in Gramm: 700.

Hardcover. Zustand: Très bon. Ancien livre de bibliothèque avec équipements. Edition 2010. Ammareal reverse jusqu'à 15% du prix net de cet article à des organisations caritatives. ENGLISH DESCRIPTION Book Condition: Used, Very good. Former library book. Edition 2010. Ammareal gives back up to 15% of this item's net price to charity organizations.

Hardcover. Zustand: Très bon. Ancien livre de bibliothèque avec équipements. Edition 2010. Ammareal reverse jusqu'à 15% du prix net de cet article à des organisations caritatives. ENGLISH DESCRIPTION Book Condition: Used, Very good. Former library book. Edition 2010. Ammareal gives back up to 15% of this item's net price to charity organizations.

Broché. Zustand: Etat moyen. in-8 Langue : Français Nb de volumes : 1.

Dillen 1938, grand In-8 broché, 395 pages. Trés bon état.

Zustand: Good. 1934. ouvrage broché 448 pages édité par l'Archiconfrérie de N.D du Sacré C?ur d'Issoudun et les éditions Dillen; avec photos noir et blanc; édition originale en BON ETAT pour son âge§ complet et solide sans annotations ni déchirures peu de pliures sur la couverture intérieur un peu jaunissant mais globalement propre (juste petites 'bavures' de scotch sur pages de garde). Good.

Zustand: New. In.

Broché. Zustand: Très bon. 1 volume broché, 395 pages [1], dos refait et second plat de la couverture factice. Cachet de la Société d'étude coloniale, bibliothèque. Bon exemplaire ( Photographies sur demande / We can send pictures of this book on simple request ).

Zustand: Neuf.

Zustand: Sehr gut. Zustand: Sehr gut | Seiten: 664 | Sprache: Englisch | Produktart: Bücher | Advances in technology are demanding ever-increasing mastery over the materials being used: the challenge is to gain a better understanding of their behaviour, and more particularly of the relations between their microstructure and their macroscopic properties. This work, of which this is the first volume, aims to provide the means by which this challenge may be met. Starting from the mechanics of deformation, it develops the laws governing macroscopic behaviour ¿ expressed as the constitutive equations ¿ always taking account of the physical phenomena which underlie rheological behaviour. The most recent developments are presented, in particular those concerningheterogeneous materials such as metallic alloys, polymers and composites. Each chapter is devoted to one of the major classes of material behaviour.  As the subtitles indicate, Volume 1 deals with micro- and macroscopic constitutive behaviour and Volume 2 with damage and fracture mechanics. A third volume will be devoted to exercises and their full solutions complementing the content of these two first volumes. Most of the chapters end with a set of exercises, to many of which either the full solution or hints on how to obtain this are given; each volume is profusely illustrated with explanatory diagrams and with electron-microscope photographs. This book, now in its second edition, has been rigorously re-written, updated and modernised for a new generation. The authors improved the existing material, in particular in modifying the organisation, and added new up-to-date content. Understanding the subject matter requires a good knowledge of solid mechanics and materialsscience; the main elements of these fields are given in a set of annexes at theend of the first volume. The authors also thought it interesting for the readers to give as footnotes some information about the many scientists whose names are attached to theories and formulae and whose memories must be celebrated. Whilst the present book, as well as Volume 2, is addressed primarily to graduate students, part of it can be used in undergraduate courses; and it is hoped that practising engineers and scientists will find the information it conveys useful. It is the authors¿ hope also that English-speaking readers will want to learn about the aspects of Frenchculture, and more particularly of the French school of micromechanics of materials, which this treatment undoubtedly displays.

Zustand: Gut. Zustand: Gut | Seiten: 532 | Sprache: Englisch | Produktart: Bücher | Keine Beschreibung verfügbar.

Zustand: Gut. Zustand: Gut | Seiten: 452 | Sprache: Englisch | Produktart: Bücher | The IUT AM Symposium on "Micromechanics of Plasticity and Damage of Multiphase Materials" was held in Sevres, Paris, France, 29 August - 1 September 1995. The Symposium was attended by 83 persons from 18 countries. In addition 17 young French students attended the meeting. During the 4 day meeting, a total of 55 papers were presented, including 24 papers in the poster sessions. The meeting was divided into 7 oral and 3 poster sessions. The 7 oral sessions were the following: - Plasticity and Viscoplasticity I and II; - Phase transformations; - Damage I and II; - Statistical and geometrical aspects; - Cracks and interfaces. Each poster session was introduced by a Rapporteur, as follows: - Session I (Plasticity and Viscoplasticity): G. Cailletaud; - Session 2 (Damage): D. Franc;:ois; - Session 3 (Phase transformation; statistical and geometrical aspects): D. Jeulin. The main purpose of the Symposium was the discussion of the state of the art in the development of micromechanical models used to predict the macroscopic mechanical behaviour of mUltiphase solid materials. These materials consist of at least two chemically different phases, present either initially or formed during plastic deformation, when a strain-induced phase transformation takes place. One session was devoted to the latter case. Continuously strengthened composite materials, containing long fibers, were out of the scope of the Symposium.

Zustand: Sehr gut. Zustand: Sehr gut | Seiten: 424 | Sprache: Englisch | Produktart: Bücher | Designing new structural materials, extending lifetimes and guarding against fracture in service are among the preoccupations of engineers, and to deal with these they need to have command of the mechanics of material behaviour. The first volume of this two-volume work deals with elastic and elastoplastic behaviour; this second volume continues with viscoelasticity, damage, fracture (resistance to cracking) and contact mechanics. As in Volume I, the treatment starts from the active mechanisms on the microscopic scale and develops the laws of macroscopic behaviour. Chapter I deals with viscoplastic behaviour, as shown, for example, at low temperatures by the effects of oscillatory loads and at high temperatures by creep under steady load. Chapter 2 treats damage phenomena encountered in all materials - for example, metals, polymers, glasses, concretes - such as cavitation, fatigue and stress-corrosion cracking. Chapter 3 treats those concepts of fracture mechanics that are needed for the understanding of resistance to cracking and Chapter 4 completes the volume with a survey of the main concepts of contact mechanics. As with Volume I, each chapter has a set of exercises, either with solutions or with indications of how to attack the problem; and there are many explanatory diagrams and other illustrations.

in 8, 1 vol, 448 p, br.

Zustand: New. In.

Zustand: Hervorragend. Zustand: Hervorragend | Seiten: 696 | Sprache: Englisch | Produktart: Bücher | Designing new structural materials, extending lifetimes and guarding against fracture in service are among the preoccupations of engineers, and to deal with these they need to have command of the mechanics of material behaviour. This ought to reflect in the training of students. In this respect, the first volume of this work deals with elastic, elastoplastic, elastoviscoplastic and viscoelastic behaviours; this second volume continues with fracture mechanics and damage, and with contact mechanics, friction and wear. As in Volume I, the treatment links the active mechanisms on the microscopic scale and the laws of macroscopic behaviour. Chapter I is an introduction to the various damage phenomena. Chapter II gives the essential of fracture mechanics. Chapter III is devoted to brittle fracture, chapter IV to ductile fracture and chapter V to the brittle-ductile transition. Chapter VI is a survey of fatigue damage. Chapter VII is devoted to hydrogen embrittlement and to environment assisted cracking, chapter VIII to creep damage. Chapter IX gives results of contact mechanics and a description of friction and wear mechanisms. Finally, chapter X treats damage in non metallic materials: ceramics, glass, concrete, polymers, wood and composites. The volume includes many explanatory diagrams and illustrations. A third volume will include exercises allowing deeper understanding of the subjects treated in the first two volumes.  .

Zustand: Gut. Zustand: Gut | Seiten: 528 | Sprache: Englisch | Produktart: Bücher | Fatigue and fracture result in billions of dollars of damage each year. This book examines the various causes of fatigue including crack growth, defects, temperature, environmental, and corrosion.

Couverture souple. Zustand: bon. RO30007518: 1934. In-8. Broché. Etat d'usage, Couv. légèrement passée, Dos satisfaisant, Intérieur bon état. 447 pages illustrées de photographies noir et blanc sur planches hors texte; couverture de remplacement, dos d'origine restauré, étiquette bibliotheque sur dos. . . . Classification Dewey : 922-Religieux.

Couverture rigide. Zustand: bon. RO60011127: 1937. In-12. Relié toilé. Bon état, Couv. convenable, Dos satisfaisant, Intérieur frais. 337 pages. . . . Classification Dewey : 430-Langues germaniques. Allemand.

Zustand: New. The design of mechanical structures with improved and predictable durability cannot be achieved without a thorough understanding of the mechanisms of fatigue damage and more specifically the relationships between the microstructure of materials and their fa.

Zustand: New. The design of mechanical structures with predictable and improved durability cannot be achieved without a thorough understanding of the mechanisms of fatigue damage and more specifically the relationships between the microstructure of materials and their fa.

Zustand: New.

Gebunden. Zustand: New.

Zustand: New. In.

Zustand: New. In.

Hardcover. Zustand: Very Good. Very good condition hard cover, some wear to cover and spine, internally clean and tidy with unmarked pages, in a good readable condition.

Zustand: New. The design of mechanical structures with improved and predictable durability cannot be achieved without a thorough understanding of the mechanisms of fatigue damage and more specifically the relationships between the microstructure of materials and their fatigue properties. Editor(s): Bathias, Claude; Pineau, Andre. Num Pages: 318 pages, Illustrations. BIC Classification: TGMD5. Category: (P) Professional & Vocational. Dimension: 164 x 241 x 22. Weight in Grams: 602. . 2011. 1st Edition. Hardcover. . . . . Books ship from the US and Ireland.

Zustand: New. The design of mechanical structures with predictable and improved durability cannot be achieved without a thorough understanding of the mechanisms of fatigue damage and more specifically the relationships between the microstructure of materials and their fatigue properties. Editor(s): Bathias, Claude; Pineau, Andre. Num Pages: 358 pages, Illustrations. BIC Classification: TG. Category: (P) Professional & Vocational. Dimension: 234 x 163 x 27. Weight in Grams: 662. . 2011. 1st Edition. Hardcover. . . . . Books ship from the US and Ireland.