Momber andreas (22 Ergebnisse)

Zustand: New. In English.

Taschenbuch. Zustand: Neu. Principles of Abrasive Water Jet Machining | Andreas W. Momber (u. a.) | Taschenbuch | xxv | Englisch | 2012 | Springer | EAN 9781447115748 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu. …

Paperback. Zustand: Brand New. reprint edition. 419 pages. 9.00x6.00x0.75 inches. In Stock.

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - Abrasive water jet machining was introduced to manufacturing ten years ago and has been increasingly used for treating hard-to-machine and multi-layered materials and as an alternative tool for milling, turning, drilling and polishing. This is the first comprehensive review of the technique, dealing with a broad range of issues including mixing and acceleration processes, material removal mechanisms, process optimization and fluid mechanics. Explanations are given as the book follows the development of an abrasive water jet machining process, from tool generation through to machining results, supervision and control. This methodical journey through the field is marked by drawings, graphs and tables, many of which are being published here for the first time. Though the book is written at an academic level, it focuses very much on practical applications, which reflects the authors' extensive involvement with both laboratory research and industrial practices.…

Zustand: New. In English.

Zustand: New. In English.

Zustand: New. pp. 286 52:B&W 6.14 x 9.21in or 234 x 156mm (Royal 8vo) Case Laminate on White w/Gloss Lam.

Hardcover. Zustand: Brand New. 1st edition. 540 pages. 8.75x6.00x1.00 inches. In Stock.

Zustand: New. Explores the literature between 1950 and 2020 and contains over 2000 referencesOffers the most complete monograph on the issueCovers all aspects of corrosion protection in detail, including coatings, cathodic protection, corrosion .

Zustand: New. Explores the literature between 1950 and 2020 and contains over 2000 referencesOffers the most complete monograph on the issueCovers all aspects of corrosion protection in detail, including coatings, cathodic protection, corrosion .

Zustand: New. pp. 216 Illus.

Paperback. Zustand: Brand New. 220 pages. 9.00x6.00x0.50 inches. In Stock.

Paperback. Zustand: Brand New. 292 pages. 9.00x6.00x0.66 inches. In Stock.

Taschenbuch. Zustand: Neu. Neuware - Corrosion and Corrosion Protection of Wind Power Structures in Marine Environments: Volume 2: Corrosion Protection Measures offers the first comprehensive review on corrosion and corrosion protection of offshore wind power structures. The book extensively discusses corrosion phenomena and corrosion types in different marine corrosion zones, including the modeling of corrosion processes and interactions between corrosion and structural stability. The book addresses important design issues, namely materials selection relevant to their performance in marine environments, corrosion allowance, and constructive design. Active and passive corrosion protection measures are emphasized, with special sections on cathodic corrosion protection and the use of protective coatings. Seawater related issues associated with cathodic protection, such as calcareous deposit formation, hydrogen formation, and fouling, are discussed. With respect to protective coatings, the book considers, for the first time, complete loading scenarios, including corrosive loads, mechanical loads, and special loads, and covers a wide range of coating materials. Problems associated with fouling and bacterial-induced corrosion are extensively reviewed. The book closes with a chapter on recent developments in maintenance strategies, inspection techniques, and repair technologies. The book will be of special interest to materials scientists, materials developers, corrosion engineers, maintenance engineers, civil engineers, steel work designers, mechanical engineers, marine engineers, chemists, and coating specialists. Offshore wind power is an emerging renewable technology and a key factor for a cleaner environment. Offshore wind power structures are situated in a demanding and challenging marine environment. The structures are loaded in a complex way, including mechanical loads and corrosive loads. Corrosion is one of the major limiting factors to the reliability and performance of the technology. Maintenance and repair of corrosion protection systems are particularly laborious and costly.…

Taschenbuch. Zustand: Neu. Neuware - Corrosion and Corrosion Protection of Wind Power Structures in Marine Environments: Volume 1: Introduction and Corrosive Loads offers the first comprehensive review on corrosion and corrosion protection of offshore wind power structures. The book provides extensive discussion on corrosion phenomena and types in different marine corrosion zones, including the modeling of corrosion processes and interactions between corrosion and structural stability. The book addresses important design issues, namely materials selection relative to performance in marine environments, corrosion allowance, and constructive design. Active and passive corrosion protection measures are emphasized, with special sections on cathodic corrosion protection and the use of protective coatings. Seawater related issues associated with cathodic protection, such as calcareous deposit formation, hydrogen formation and fouling, are discussed. With respect to protective coatings, the book considers for the first time complete loading scenarios, including corrosive loads, mechanical loads, and special loads, and covers a wide range of coating materials. Problems associated with fouling and bacterial-induced corrosion are extensively reviewed. The book closes with a chapter on recent developments in maintenance strategies, inspection techniques, and repair technologies. The book is of special interest to materials scientists, materials developers, corrosion engineers, maintenance engineers, civil engineers, steel work designers, mechanical engineers, marine engineers. Offshore wind power is an emerging renewable technology and a key factor for a cleaner environment. Offshore wind power structures are situated in a demanding and challenging marine environment. The structures are loaded in a complex way, including mechanical loads and corrosive loads. Corrosion is one of the major limiting factors to the reliability and performance of the technology. Maintenance and repair of corrosion protection systems are particularly laborious and costly.…

2 Titel, 3 Bl., 114 S., 1 Bl. Orig.-Karton (Rücken unten mit Klarsichtstreifen und Signatur-Schild). - Sehr guter Zustand, lediglich Vorsatz mit Strichcode-Etikett. * Mit Beiträgen von: Andreas Wilfried Momber ("Druckwasserstrahl-Technik. Materialrecycling mit Hochdruckwasserstrahlen bis 250 Mpa (2500 bar)", M. Knirsch und Roland Meyer-Pittroff ("Der Einsatz von Hochdruckwasserstrahlen bei der Zerkleinerung weicher Stoffe am Beispiel von Altetiketten"), M. Knirsch und Marcus Weiß ("Teppichbodenrecycling mit Hochdruckwasserstrahlen"), H.-J. Heimhard ("Anwendung der Wasserstrahltechnik beim "Hochdruck-Bodenwaschverfahren"), Wolfgang Sondermann ("Bodenverfestigung und -reinigung mit Druckwasserstrahl-Technik"), C. van de Bogaerde ("Entlacken und Entschichten mit Hochdruckwasserstrahl-Technik"), Dirk Watermann ("Arbeits- und Gesundheitsschutz beim Einsatz von Hochdruckwasserstrahlmaschinen"). * Stichworte: Hochdruckreinigung, Kärchern, Industrielles Recycling usw. * ISBN 3-8169-2048-9 * (Kontakt & Studium, 575. Hrsg. Wilfried J. Bartz).…

Taschenbuch. Zustand: Neu. Materialrecycling mit Hochdruckwasserstrahlen | Grundlagen und praktische Anwendungen, Kontakt & Studium 575 | Andreas W Momber | Taschenbuch | 114 S. | Deutsch | 2000 | expert verlag GmbH | EAN 9783816915942 | Verantwortliche Person für die EU: Narr Francke Attempto Verlag GmbH + Co. KG, Cora Schikora, Dischingerweg 5, 72070 Tuebingen, info[at]narr[dot]de | Anbieter: preigu.…

Zustand: Gut. Zustand: Gut | Seiten: 114 | Sprache: Deutsch | Produktart: Bücher | Keine Beschreibung verfügbar.

Buch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - Die Bearbeitung und Prüfung von Betonoberflächen ist in zweierlei Hinsicht von Bedeutung: Zum einen werden in der Architektur Verfahren zur Oberflächenbearbeitung gezielt zur Gestaltung von Betonoberflächen eingesetzt; zum anderen müssen im Rahmen von Instandsetzungsmaßnahmen Betontraggründe wiederhergestellt und für die Beschichtung saniert werden. Das Buch beschreibt die Verfahren zur Oberflächenbearbeitung nach den Kriterien: Wirkungsmechanismus, Komponenten, Anwendungsbereiche, erzeugte Traggrundqualität, Arbeits- und Gesundheitsschutz sowie Entsorgung und Kosten. Im zweiten Teil des Buches werden Prüfungsmethoden und Beurteilungskriterien beschrieben, die für die Qualität des Betonuntergrundes ausschlaggebend sind. Abschliessend geben die Autoren Hinweise zur Verfahrensauswahl, zu Ausschreibungs- und Vergaberichtlinien sowie zu Umweltschutzmaßnahmen.…

Softcover. Zustand: gut. Materialrecycling mit Hochdruckwasserstrahlen - Grundlagen und praktische Anwendungen In deutscher Sprache. pages.

Zustand: gut. Handbuch Druckwasserstrahl-Technik In deutscher Sprache. pages.

Zustand: Very Good.