Mindforge press (10 Ergebnisse)
- Softcover
Anbieter: PBShop.store UK, Fairford, GLOS, Vereinigtes KönigreichPBShop.store UK
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 65,77
EUR 5,84 VersandVersand von Vereinigtes Königreich nach USAAnzahl: Mehr als 20 verfügbar
PAP. Zustand: New. New Book. Shipped from UK. Established seller since 2000.
- Softcover
Anbieter: PBShop.store UK, Fairford, GLOS, Vereinigtes KönigreichPBShop.store UK
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 65,77
EUR 8,88 VersandVersand von Vereinigtes Königreich nach USAAnzahl: Mehr als 20 verfügbar
PAP. Zustand: New. New Book. Shipped from UK. Established seller since 2000.
- Softcover
Anbieter: PBShop.store UK, Fairford, GLOS, Vereinigtes KönigreichPBShop.store UK
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 69,78
EUR 7,87 VersandVersand von Vereinigtes Königreich nach USAAnzahl: Mehr als 20 verfügbar
PAP. Zustand: New. New Book. Shipped from UK. Established seller since 2000.
- Softcover
Anbieter: PBShop.store UK, Fairford, GLOS, Vereinigtes KönigreichPBShop.store UK
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 79,01
EUR 8,88 VersandVersand von Vereinigtes Königreich nach USAAnzahl: Mehr als 20 verfügbar
PAP. Zustand: New. New Book. Shipped from UK. Established seller since 2000.
- Softcover
Anbieter: PBShop.store UK, Fairford, GLOS, Vereinigtes KönigreichPBShop.store UK
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 82,39
EUR 7,87 VersandVersand von Vereinigtes Königreich nach USAAnzahl: Mehr als 20 verfügbar
PAP. Zustand: New. New Book. Shipped from UK. Established seller since 2000.
- Softcover
Anbieter: PBShop.store UK, Fairford, GLOS, Vereinigtes KönigreichPBShop.store UK
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 96,41
EUR 6,83 VersandVersand von Vereinigtes Königreich nach USAAnzahl: Mehr als 20 verfügbar
PAP. Zustand: New. New Book. Shipped from UK. Established seller since 2000.
- Softcover
Anbieter: PBShop.store UK, Fairford, GLOS, Vereinigtes KönigreichPBShop.store UK
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 112,91
EUR 6,83 VersandVersand von Vereinigtes Königreich nach USAAnzahl: Mehr als 20 verfügbar
PAP. Zustand: New. New Book. Shipped from UK. Established seller since 2000.
- Softcover
Anbieter: AHA-BUCH GmbH, Einbeck, DeutschlandAHA-BUCH GmbH
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 121,44
EUR 39,92 VersandVersand von Deutschland nach USAAnzahl: 2 verfügbar
Taschenbuch. Zustand: Neu. Neuware.
- Softcover
Anbieter: AHA-BUCH GmbH, Einbeck, DeutschlandAHA-BUCH GmbH
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 139,66
EUR 30,50 VersandVersand von Deutschland nach USAAnzahl: 2 verfügbar
Taschenbuch. Zustand: Neu. Neuware - The complete, modern guide to Geometric Dimensioning and Tolerancing. Master the language of precision engineering. GD&T is the symbolic language that defines how much a manufactured part may vary and still work - and this handbook teaches all of it, from first principles to advanced applicat…ion, in one rigorous, richly illustrated volume built around ASME Y14.5-2018 with ISO GPS comparisons throughout. Whether you are an engineering student, a practicing mechanical or manufacturing engineer, a machinist, a quality inspector, or a designer, this book takes you from why a round tolerance zone accepts more good parts than a square one all the way to composite position, profile, runout, tolerance stack-up, and functional gauge design - with every equation derived, every worked example solved step by step, and every practice problem answered. Inside, you will learn to: read and write feature control frames, datums, and every geometric symbol; apply material condition modifiers (MMC, LMC, RFS) and compute bonus tolerance and virtual condition; build datum reference frames and use datum targets on castings, forgings, and non-rigid parts; master position, profile, orientation, form, and runout through fully worked examples; perform tolerance stack-up analysis (worst-case and statistical) and design functional gauges; and connect GD&T to limits & fits (ISO 286), surface texture, CAD / model-based definition, and inspection. What sets this handbook apart: 27 chapters, 170+ technical figures, roughly 100 fully worked examples, a comprehensive problem set with solutions, complete case studies that tolerance real parts end to end, and quick-reference appendices. A book to learn from and a reference to keep on the bench. Stop guessing what a drawing means. Speak the language of precision - clearly, correctly, and with confidence.
- Softcover
Anbieter: AHA-BUCH GmbH, Einbeck, DeutschlandAHA-BUCH GmbH
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 163,94
EUR 30,50 VersandVersand von Deutschland nach USAAnzahl: 2 verfügbar
Taschenbuch. Zustand: Neu. Neuware - Ask ten engineers what caused an incident, and most will say 'human error.' In the industries where a mistake can cost lives, that answer is where the real work should begin - not where it ends. When something goes wrong at a process facility, the reflex is to blame the person at the panel, r…etrain them, and add one more line to a procedure, while the conditions that made the error likely remain in place, waiting for the next capable operator. The same class of incident returns under a new name, because its true cause was never touched. This handbook offers a better way to think about human performance, and a practical method to match. It treats human error as a symptom of how systems, jobs, and organizations are designed, and it equips you to find and remove the conditions that turn an ordinary slip into a catastrophe, so that safe, reliable operation becomes the outcome the design makes easy. Inside, you will be able to: - Understand why competent, well-trained people make predictable mistakes, and why 'trying harder' is the wrong fix- Analyze tasks and reason honestly about human reliability to find where error is most likely and most costly- Evaluate and improve control rooms, interfaces, and alarm systems so the signals that matter are not lost in noise- Write procedures people can follow under pressure, and judge where automation helps or quietly introduces new risks- Manage workload, fatigue, and shift patterns as measurable contributors to performance- Strengthen situation awareness, communication, and handover, and build the culture and competence that surface problems early Key topics: operator cognition and its limits; error taxonomies and mechanisms; human reliability analysis; task analysis; control-room, workstation, and interface design; alarm management; procedures; automation and function allocation; workload, fatigue, and shift work; situation awareness and decision-making; communication, handover, and teamwork; safety culture; the integration of human factors into process-safety management; and competence, training, and learning from experience. Every chapter includes worked examples, practice problems, and answer keys. Written for: Written for practicing engineers, operations and process-safety professionals, control-room and interface designers, plant and shift managers, and advanced students preparing to take responsibility for hazardous processes. It assumes familiarity with process operations but develops the human-factors science from first principles. Open this handbook and begin developing the knowledge to design out error, support the people at the center of the plant, and operate extraordinary hazards safely.
