Menezes pradeep (33 Ergebnisse)

XIII, 286 p. Hardcover. Versand aus Deutschland / We dispatch from Germany via Air Mail. Einband bestoßen, daher Mängelexemplar gestempelt, sonst sehr guter Zustand. Imperfect copy due to slightly bumped cover, apart from this in very good condition. Stamped. Sprache: Englisch.

Zustand: New. In English.

HRD. Zustand: New. New Book. Shipped from UK. Established seller since 2000.

Zustand: New. In English.

Zustand: New. pp. 206.

PAP. Zustand: New. New Book. Shipped from UK. Established seller since 2000.

PAP. Zustand: New. New Book. Shipped from UK. Established seller since 2000.

HRD. Zustand: New. New Book. Shipped from UK. Established seller since 2000.

Kartoniert / Broschiert. Zustand: New. Emad Omrani received his Master s degree from K.N. Toosi, Iran in Materials Science and Engineering majored in Materials Selction. He started his Doctorate in Science in University of Wisconsin- Milwaukee in 2013. He is working in Center for Advanced Mat.

Zustand: NEW.

Zustand: New. In English.

Paperback. Zustand: Brand New. 2nd edition. 311 pages. 9.25x6.10x9.25 inches. In Stock.

HRD. Zustand: New. New Book. Shipped from UK. Established seller since 2000.

Zustand: New. In English.

Kartoniert / Broschiert. Zustand: New. No comprehensive literature on self-lubricating materialsAn awareness for industries to employ self-lubricating materialsEnvironmentally friend materials (green materials)Pradeep L. Menezes (corresponding author) is an ass.

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - In most tribological applications, liquid or grease based lubricants are used to facilitate the relative motion of solid bodies to minimize friction and wear between interacting surfaces. The challenges for liquid lubricants arise in extreme environmental conditions, such as very high or low temperatures, vacuum, radiation, and extreme contact pressure. At these conditions, solid lubricants may be the alternative choice which can help to decrease friction and wear without incorporating liquid lubricants. Challenges with solid lubricants are to maintain a continuous supply of solid lubricants on the contact surfaces to act as lubricous layer between two sliding surfaces. Such a continuous supply is more easily maintained in the case of liquid lubricants when compared to solid lubricants. The most innovative development to ensure a continuous supply of solid lubricant to the contact surface during sliding is to introduce solid lubricant as reinforcement into the matrix of one of the sliding components. Composite materials are engineered or naturally occurring materials which contain two or more distinct constituents with significantly different chemical, physical and mechanical properties. Composites consist of reinforcement and matrix (metal, polymer and ceramics). Among various reinforcements, recent emerging material, solid lubricant, is found to have many favorable attributes such as good lubrication property. Self-lubrication is the ability of a material to provide lubrication to the contact surface to decrease friction and wear rate in the absence of an external lubricant by transferring embedded solid lubricants in the composite to the interface. Self-lubricating composites (SLCs) are an important category of engineering materials that are increasingly replacing a number of conventional materials in the automotive, aerospace, and marine industries due to superior tribological properties. In SLCs, solid lubricant materials, including carbonous materials, molybdenum disulfide (MoS2), and hexagonal boron nitride (h-BN) are embedded into the matrices as reinforcements to manufacture a novel material with attractive self-lubricating properties. Several studies have been investigated the tribological properties of self-lubricating materials. This book fills that gap to have a reference book about self-lubricating materials and their properties to help scientists, engineers, and industries. This book discusses mechanisms of self-lubricating materials, self-lubricating properties and the applications for industries. The chapters will be written by authoritative expertise in the field. Additionally, this book will demonstrate fundamental study and most advanced innovations in self-lubricating materials as regards to friction and wear. The chapters also include tribological properties of composites and coatings and some practical applications of self-lubricating materials.…

Buch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - In most tribological applications, liquid or grease based lubricants are used to facilitate the relative motion of solid bodies to minimize friction and wear between interacting surfaces. The challenges for liquid lubricants arise in extreme environmental conditions, such as very high or low temperatures, vacuum, radiation, and extreme contact pressure. At these conditions, solid lubricants may be the alternative choice which can help to decrease friction and wear without incorporating liquid lubricants. Challenges with solid lubricants are to maintain a continuous supply of solid lubricants on the contact surfaces to act as lubricous layer between two sliding surfaces. Such a continuous supply of solid lubricant is more easily maintained in the case of liquid lubricants when compared to solid lubricants. The most innovative development to ensure a continuous supply of solid lubricant to the contact surface during sliding is to introduce solid lubricant as reinforcement into the matrix of one of the sliding components. Composite materials are engineered or naturally occurring materials which contain two or more distinct constituents with significantly different chemical, physical and mechanical properties. Composites consist of reinforcement and matrix (metal, polymer and ceramics). Among various reinforcements, recent emerging material, solid lubricant, is found to have many favorable attributes such as good self-lubricant property. Self-lubrication is the ability of material to transfer embedded solid lubricants to the contact surface to decrease wear rate and friction in the absence of an external lubricant. Self-lubricating metal matrix composites (SLMMCs) are an important category of engineering materials that are increasingly replacing a number of conventional materials in the automotive, aerospace, and marine industries due to superior tribological properties. In SLMMCs, solid lubricant materials including carbonous materials, molybdenum disulfide (MoS2), and hexagonal boron nitride (h-BN) are embedded into the metal matrices as reinforcements to manufacture a novel material with attractive self-lubricating properties. Several studies have been investigated the tribological properties of self-lubricating materials. This book fills that gap to have a reference book about self-lubricating materials and their properties to help scientists, engineers, and industries. This book will try to discuss technically about self-lubricating materials and their properties and the applications for industries. The chapters will be written by authoritative expertise in the field. Additionally, this book will demonstrate fundamental study and most advanced innovations in self-lubricating materials as regards to friction and wear. The chapters also include tribological properties of composites and coatings and some practical application of self-lubricating materials.…

Zustand: New. KlappentextThere is a critical need for engineers to move away from using conventional petroleum-based oils and lubricants in mechanical systems due to their environmental impact. As the first book dedicated to multifunctional bio-bas.

Buch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - In most tribological applications, liquid or grease based lubricants are used to facilitate the relative motion of solid bodies to minimize friction and wear between interacting surfaces. The challenges for liquid lubricants arise in extreme environmental conditions, such as very high or low temperatures, vacuum, radiation, and extreme contact pressure. At these conditions, solid lubricants may be the alternative choice which can help to decrease friction and wear without incorporating liquid lubricants. Challenges with solid lubricants are to maintain a continuous supply of solid lubricants on the contact surfaces to act as lubricous layer between two sliding surfaces. Such a continuous supply is more easily maintained in the case of liquid lubricants when compared to solid lubricants. The most innovative development to ensure a continuous supply of solid lubricant to the contact surface during sliding is to introduce solid lubricant as reinforcement into the matrix of one of the sliding components. Composite materials are engineered or naturally occurring materials which contain two or more distinct constituents with significantly different chemical, physical and mechanical properties. Composites consist of reinforcement and matrix (metal, polymer and ceramics). Among various reinforcements, recent emerging material, solid lubricant, is found to have many favorable attributes such as good lubrication property. Self-lubrication is the ability of a material to provide lubrication to the contact surface to decrease friction and wear rate in the absence of an external lubricant by transferring embedded solid lubricants in the composite to the interface. Self-lubricating composites (SLCs) are an important category of engineering materials that are increasingly replacing a number of conventional materials in the automotive, aerospace, and marine industries due to superior tribological properties. In SLCs, solid lubricant materials, including carbonous materials, molybdenum disulfide (MoS2), and hexagonal boron nitride (h-BN) are embedded into the matrices as reinforcements to manufacture a novel material with attractive self-lubricating properties. Several studies have been investigated the tribological properties of self-lubricating materials. This book fills that gap to have a reference book about self-lubricating materials and their properties to help scientists, engineers, and industries. This book discusses mechanisms of self-lubricating materials, self-lubricating properties and the applications for industries. The chapters will be written by authoritative expertise in the field. Additionally, this book will demonstrate fundamental study and most advanced innovations in self-lubricating materials as regards to friction and wear. The chapters also include tribological properties of composites and coatings and some practical applications of self-lubricating materials.…

Zustand: New. In English.

Taschenbuch. Zustand: Neu. Tribology of Additively Manufactured Materials | Fundamentals, Modeling, and Applications | Pradeep Menezes (u. a.) | Taschenbuch | Einband - flex.(Paperback) | Englisch | 2022 | Elsevier Inc | EAN 9780128213285 | Verantwortliche Person für die EU: Kolibri 360 GmbH, Ettore-Bugatti-Str. 6-14, 51149 Köln, produktsicherheit[at]kolibri360[dot]de | Anbieter: preigu. …

Zustand: New. Provides a complete overview of tribocorrosion testing, experimentation and modeling methods that in turn empower safer, environmentally-friendlier and cost-saving applications Balances experimental and computational methods, thus encourag.

hardcover. Zustand: Very Good.

Hardcover. Zustand: Brand New. 2nd edition. 311 pages. 9.25x6.10x0.91 inches. In Stock.

Zustand: New. In English.

Kartoniert / Broschiert. Zustand: New. Provides theoretical, experimental and computational data for a better understanding of the complex tribological behaviors in additively manufactured components Discusses applications of additively manufactured components, considering the.

Taschenbuch. Zustand: Neu. Neuware - Tribocorrosion: Fundamentals, Methods, and Materials provides a balanced coverage of recent advancements in both experimental and computational areas of tribocorrosion, covering the basic concepts of tribology and electrochemistry, as well as testing set-ups, protocols, electrochemical methods, and more. It outlines experimental methods, demonstrating the different effects of material loss due to mechanical and electrochemical actions and looks at their effects in applied automotive, aerospace and biomedical settings. Standard testing protocols, tribocorrosion mechanisms in sliding contacts, and modeling and simulation techniques are all covered at length, as is bio-tribocorrosion and the best ways to prevent it. …

Zustand: New. Discusses the mechanics, synthesis, processing, properties, and applications of lightweight compositesCovers the recent cutting-edge advancements in design and development of metallic, polymeric, and ceramic-based lightweight composites.

Zustand: New. In English.

Buch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - This book describes available tribology technologies and introdces a comprehensive overview of tribology. General, up-to-date knowledge on how tribology is approached in various related areas of research, both experimental and computational is provided.…