Lino guzzella (29 Ergebnisse)

3rd ed. XV, 409 p. Hardcover. 3rd ed. Versand aus Deutschland / We dispatch from Germany via Air Mail. Einband bestoßen, daher Mängelexemplar gestempelt, sonst sehr guter Zustand. Imperfect copy due to slightly bumped cover, apart from this in very good condition. Stamped. Sprache: Englisch.

gebundene Ausgabe. Zustand: Gut. 300 Seiten Das hier angebotene Buch stammt aus einer teilaufgelösten Bibliothek und kann die entsprechenden Kennzeichnungen aufweisen (Rückenschild, Instituts-Stempel.); der Buchzustand ist ansonsten ordentlich und dem Alter entsprechend gut. In ENGLISCHER Sprache. Sprache: Englisch Gewicht in Gramm: 650. …

Gr.-8°, Softcover/Paperback. 3., revised edition. XIV, 376 S. : zahlr. graph. s/w Darst. Sprache: Englisch. Geringe äußere Gebrauchsspuren. Innen tadellos. Sprache: Deutsch Gewicht in Gramm: 825.

Taschenbuch. Zustand: Neu. Neuware - This text supports a first course on feedback control systems in an engineering undergraduate program. Its primary objectives are to introduce the main ideas and to show the basic approaches for the design of simple yet practically relevant control systems.Readers planning to work through this text should have a clear understanding of elementary complex analysis, of matrix algebra and of calculus, including ordinary differential equations. Basic concepts of engineering physics are assumed to be known as well.The text is organized in a top-down way, along the following main points: systems modeling; analysis of open-loop systems in the time and frequency domain; analysis of closed-loop systems in the time and frequency domain; identification of unavoidable performance constraints; specification of the desired closed-loop system behavior; synthesis of feedback control systems; and implementation of control systems.This course introduces all relevant steps of a control system design procedure. The price one must pay for such a breadth is the limitation of the discussion to relatively simple systems.This text is organized in 'lectures', which represent the amount of material that can be discussed in a typical two-hours class. Small exercises are included in the main text. The solutions to these 'quick checks' can be found in the appendix.…

Zustand: Fair. This is an ex-library book and may have the usual library/used-book markings inside.This book has hardback covers. In fair condition, suitable as a study copy. Please note the Image in this listing is a stock photo and may not match the covers of the actual item,800grams, ISBN:9783540222743. …

Paperback. Zustand: New. 3rd ed. 2013. This text provides an introduction to the mathematical modeling and subsequent optimization of vehicle propulsion systems and their supervisory control algorithms.Automobiles are responsible for a substantial part of the world's consumption of primary energy, mostly fossil liquid hydrocarbons and the reduction of the fuel consumption of these vehicles has become a top priority. Increasing concerns over fossil fuel consumption and the associated environmental impacts have motivated many groups in industry and academia to propose new propulsion systems and to explore new optimization methodologies. This third edition has been prepared to include many of these developments.In the third edition, exercises are included at the end of each chapter and the solutions are available on the web. …

Zustand: New.

Zustand: New. This text supports a first course on feedback control systems in an engineering undergraduate program. Its primary objectives are to introduce the main ideas and to show the basic approaches for the design of simple yet practically relevant control systems.

Zustand: New.

Zustand: New. pp. 412.

Zustand: New. pp. x + 300 Illus.

hardcover. Zustand: Very Good.

Taschenbuch. Zustand: Neu. Analysis and Synthesis of Single-Input Single-Output Control Systems | Lino Guzzella | Taschenbuch | 396 S. | Englisch | 2019 | vdf Hochschulverlag AG | EAN 9783728139726 | Verantwortliche Person für die EU: Brockhaus Kommissionsgeschäft GmbH, Kreidlerstr. 9, 70806 Kornwestheim, info[at]brocom[dot]de | Anbieter: preigu.…

Taschenbuch. Zustand: Neu. Vehicle Propulsion Systems | Introduction to Modeling and Optimization | Lino Guzzella (u. a.) | Taschenbuch | xvi | Englisch | 2015 | Springer | EAN 9783642438479 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu. …

Paperback. Zustand: New. 3rd ed. 2013. This text provides an introduction to the mathematical modeling and subsequent optimization of vehicle propulsion systems and their supervisory control algorithms.Automobiles are responsible for a substantial part of the world's consumption of primary energy, mostly fossil liquid hydrocarbons and the reduction of the fuel consumption of these vehicles has become a top priority. Increasing concerns over fossil fuel consumption and the associated environmental impacts have motivated many groups in industry and academia to propose new propulsion systems and to explore new optimization methodologies. This third edition has been prepared to include many of these developments.In the third edition, exercises are included at the end of each chapter and the solutions are available on the web. …

Zustand: As New. Unread book in perfect condition.

Hardback. Zustand: New. 3rd ed. 2013.

Zustand: New.

Hardback. Zustand: New. 2nd ed. 2010. Internal combustion engines (ICE) still have potential for substantial improvements, particularly with regard to fuel efficiency and environmental compatibility. In order to fully exploit the remaining margins, increasingly sophisticated control systems have to be applied. This book offers an introduction to cost-effective model-based control-system design for ICE. The primary emphasis is put on the ICE and its auxiliary devices. Mathematical models for these processes are developed and solutions for selected feedforward and feedback control-problems are presented.The discussions concerning pollutant emissions and fuel economy of ICE in automotive applications constantly intensified since the first edition of this book was published. Concerns about the air quality, the limited resources of fossil fuels and the detrimental effects of greenhouse gases exceedingly spurred the interest of both the industry and academia in further improvements.The most important changes and additions included in this second edition are: restructured and slightly extended section on superchargers, short subsection on rotational oscillations and their treatment on engine test-benches, complete section on modeling, detection, and control of engine knock, improved physical and chemical model for the three-way catalytic converter, new methodology for the design of an air-to-fuel ratio controller, short introduction to thermodynamic engine-cycle calculation and corresponding control-oriented aspects.…

Zustand: New.

Taschenbuch. Zustand: Neu. Introduction to Modeling and Control of Internal Combustion Engine Systems | Lino Guzzella (u. a.) | Taschenbuch | xii | Englisch | 2014 | Springer | EAN 9783642424700 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu. …

Softcover. Zustand: Sehr gut. 2. Auflage. 384 Seiten Verlag: Vdf Hochschulverlag; Auflage: 2nd Revised edition 2009) fine probly not used, nr-xl-672 Language: DEU.

Buch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - Internal combustion engines (ICE) still have potential for substantial improvements, particularly with regard to fuel efficiency and environmental compatibility. In order to fully exploit the remaining margins, increasingly sophisticated control systems have to be applied. This book offers an introduction to cost-effective model-based control-system design for ICE. The primary emphasis is put on the ICE and its auxiliary devices. Mathematical models for these processes are developed and solutions for selected feedforward and feedback control-problems are presented.The discussions concerning pollutant emissions and fuel economy of ICE in automotive applications constantly intensified since the first edition of this book was published. Concerns about the air quality, the limited resources of fossil fuels and the detrimental effects of greenhouse gases exceedingly spurred the interest of both the industry and academia in further improvements.The most important changes and additions included in this second edition are: restructured and slightly extended section on superchargers, short subsection on rotational oscillations and their treatment on engine test-benches, complete section on modeling, detection, and control of engine knock, improved physical and chemical model for the three-way catalytic converter, new methodology for the design of an air-to-fuel ratio controller, short introduction to thermodynamic engine-cycle calculation and corresponding control-oriented aspects.…

Zustand: gut. 2019. Analysis and Synthesis of Single-Input Single-Output Control Systems (vdf Lehrbuch) In deutscher Sprache. pages.

Hardback. Zustand: New. 2nd ed. 2010. Internal combustion engines (ICE) still have potential for substantial improvements, particularly with regard to fuel efficiency and environmental compatibility. In order to fully exploit the remaining margins, increasingly sophisticated control systems have to be applied. This book offers an introduction to cost-effective model-based control-system design for ICE. The primary emphasis is put on the ICE and its auxiliary devices. Mathematical models for these processes are developed and solutions for selected feedforward and feedback control-problems are presented.The discussions concerning pollutant emissions and fuel economy of ICE in automotive applications constantly intensified since the first edition of this book was published. Concerns about the air quality, the limited resources of fossil fuels and the detrimental effects of greenhouse gases exceedingly spurred the interest of both the industry and academia in further improvements.The most important changes and additions included in this second edition are: restructured and slightly extended section on superchargers, short subsection on rotational oscillations and their treatment on engine test-benches, complete section on modeling, detection, and control of engine knock, improved physical and chemical model for the three-way catalytic converter, new methodology for the design of an air-to-fuel ratio controller, short introduction to thermodynamic engine-cycle calculation and corresponding control-oriented aspects.…

Zustand: As New. Unread book in perfect condition.

Hardcover. Zustand: gut. 2004. Introduction to Modeling and Control of Internal Combustion Engine Systems In deutscher Sprache. pages.

Softcover. Zustand: Sehr gut. LEICHTE KNICK AM COVER, SONST WIE UNGELESEN, 3. AUFL. 2011 Language: DEU.

paperback. Zustand: New. Language:Chinese.Translations of international advanced technology and electrical engineering: a vehicle drive system modeling and optimization (original book the 3rd edition).