Kumar kaushik (597 Ergebnisse)

Paperback. Zustand: Very Good. It's a well-cared-for item that has seen limited use. The item may show minor signs of wear. All the text is legible, with all pages included. It may have slight markings and/or highlighting.

Zustand: New. pp. 264.

Zustand: New. pp. 440.

Zustand: New. pp. 288.

Zustand: New.

Zustand: New.

Hardcover. Zustand: New.

Zustand: New.

Zustand: New.

Soft cover. Zustand: New. 1st Edition. Contents: 1. Pharmaceutical Analysis. 2. Errors. 3. Pharmacopoeia. 4. Acid-Base Titrations. 5. Non-Aqueous Titrations. 6. Precipitation Titrations. 7. Complexometric Titrations. 8. Gravimetry Analysis. 9. Diazotization Titrations. 10. Redox Titrations. 11. Conductometry. 12. Potentiometry. 13. Polarography. Practicals. Index Pharmaceutical analysis is the application of analytical procedures used to determine the purity, safety and quality of drugs and chemicals. Meant for undergraduate students of Pharmacy, this book emphasizes the basics of pharmaceutical analysis, techniques used in analysis, methods of expressing concentrations, preparation and standardization of various molar and normal solutions, titrations & electrochemical methods of analysis. Recent developments in pharmaceutical analysis have been incorporated. Pharmaceutical analysis is used to: identify the drug in the formulated product; confirm whether the formulation contain solely the active ingredient or additional impurities are presents; check the stability of the drug; find the rate of drug release from its formulation; confirm the identity and purity of pure drug meets specification; measure the concentrations of specified impurities; and confirm the pKa values, partition coefficients, solubilities. …

Zustand: New. pp. 398.

Zustand: New. pp. xv + 387.

Zustand: New. pp. 470.

Zustand: New. pp. 418.

Zustand: New. pp. 439.

Zustand: New. pp. [x] + 89 Figures, Illus.

Zustand: New.

Paperback. Zustand: Brand New. 334 pages. 9.00x6.00x0.84 inches. In Stock.

Zustand: New. In English.

Soft cover. Zustand: New. 1st Edition. Contents: Section I: Introduction to Industrial Engineering. 1. Introduction. Section II: Productivity and Work Study. 2. Productivity. 3. Work study. 4. Human factor and work study. Section III: Method Study. 5. Method study. 6. Movement at workplace. 7. Methods and movements at the workplace. 8. Evaluate, define, install, maintain. 9. Method study in the office. Section IV: Work Measurement. 10. Time study. 11. Time study: selecting and timing the job. 12. Time study: rating. 13. Time study: from study to standard time. 14. Predetermined time standards. 15. The use of time standards. Section V: Entrepreneurial Development. 16. Entrepreneur and entrepreneurship. 17. Qualities and functions of entrepreneurs, role of entrepreneur in economic growth. 18. Competing theories of entrepreneurship.19. Government policy towards small scale industries' structure. Section VI: Inspection and Statistical Quality Control. 20. Defining quality. 21. Total quality management. 22. The role of inspection. 23. Statistical quality control. Section VII: Production Planning and Control. 24. Production, planning and control. Section VIII: Location Selection and Plant Layout. 25. Plant location. 26. Location decision and layout. Section IX: Job Evaluation and Wages. 27. Introduction to job evaluation. 28. Job evaluation method. 29. Wages. Section X: Industrial Legislation. 30. Industrial legislation. Section XI: Value Analysis. 31. What is value analysis? 32. How to use value analysis? Section XII: Leadership. 33. Leadership. Section XIII: Operation Research. 34. Linear programming. 35. Project management. Section XIV: Industrial Safety. 36. Introduction to safety engineering. 37. Occupational safety. Section XV: Engineering Economics. 38. Introduction. 39. Replacement and maintenance analysis. 40. Inventory control. Review questions. Index. Industrial engineering deals with the optimization of different processes, systems or organizations. It involves the use of different physical, mathematical and social principles together with the methods of engineering design to optimize the results obtained from the different complex processes or systems. The scope of industrial engineering management is as vast as to include a wide array of sub-specialties such as operations research, manufacturing engineering, production engineering, management science, etc. This book explains the different aspects related to the principles of optimizing the complex systems and processes of an organization. …

Zustand: New. Brand New. Soft Cover International Edition. Different ISBN and Cover Image. Priced lower than the standard editions which is usually intended to make them more affordable for students abroad. The core content of the book is generally the same as the standard edition. The country selling restrictions may be printed on the book but is no problem for the self-use. This Item maybe shipped from US or any other country as we have multiple locations worldwide.…

Zustand: New. pp. 446.

Zustand: New. pp. [xiii] + 205 Figures.

Zustand: New. pp. xii + 623 Illus. (Col.).

Paperback. Zustand: Very Good. 1. It's a well-cared-for item that has seen limited use. The item may show minor signs of wear. All the text is legible, with all pages included. It may have slight markings and/or highlighting.

paperback. Zustand: Very Good.

Soft cover. Zustand: New. 1st Edition. Contents: I. Introduction to CREO parametric: 1. Overview of CREO. II. Sketching mode.2. Getting started with sketching and draw. 3. Sketching tools. 4. Editing tools. 5. Constrains. 6. Dimensioning. III. Part as solid, sheetmetal and bulk: 7. Get Data. 8.Shapes. 9.Engineering Tools. 10. Editing. 11. Surfaces. 12. Sheet Metal. IV. Assembly: 13. Starting with an Assembly. V. Drawing: 14. Drawing. V. Manufacturing: 15. Manufacturing. Understanding CREO through examples, as the name suggests, the book deals with the in-depth knowledge about CREO Parametric which is 3D CAD software and effective merging of application software used for design and product development. CREO Parametric is used by the designers due to various advantages which are Parametric and direct modeling, Flexibility, Interoperability and multi CAD data handling. It provides scalable access to the right capabilities which helps in meeting individual needs while designing a product. The book is divided into six sections. The authors strongly believe that the book is very apt for the engineering courses in the universities where the students can learn about CREO in a practical and understandable way. The strategy used in this book is simple with step by step techniques so as to enable the readers gain knowledge about the subject easily. The manufacturing section of the design section makes this book unique as no other books in the market have covered. (jacket). …

Soft cover. Zustand: New. 1st Edition. Contents: I. Kinetics, Thermodynamics and Crystallographic Aspects of Engineering Materials: 1. Introduction to Materials Science and Engineering. 2. Bonding: Atomic Structure and Bonding in Solids. 3. Structure of Crystalline Solids. 4. Thermodynamics of Solids. MCQ For Section I. II. Properties & Strengthening of Engineering Materials: 5. Mechanical Behavior of Solids & Properties of Materials. 6. Strengthening of Engineering Materials. MCQ For Section II. III. Degradation & Failure of Engineering Materials: 7. Degradation of Engineering Materials. 8. Corrosion in Engineering Materials. 9. Failure of Engineering Materials: Fatigue and Creep. MCQ For Section III. IV. Engineering Materials: Properties And Processing: 10. Polymers, Glasses and Ceramics. 11. Processing and Forming Operations of Materials. 12. Engineering Materials. MCQ For Section IV and V. Economic, Environmental and Social Aspects of Engineering Materials: 13. Economic, Environmental and Social Issues of Material Usage. Model Question Papers.Glossary. This book contains of five Sections with 13 Chapters in total and in each of these chapters the primary aim is to deliver the basic knowledge of the engineering materials. All topics are covered starting with Kinetics, thermodynamics & crystallographic aspects of engineering materials, the Atomic Structures and Bonding in solids, elaborates on the Structure of the Crystalline solids, Thermodynamics of Solids constitutes of discussion on Structure and Composition of the Phase Diagrams, Strengthening of material and at the last section takes into account the Economic, Environmental and the Social issues associated with the utilization of these Engineering Materials. (jacket).…

xv, 398 p. Hardcover. Versand aus Deutschland / We dispatch from Germany via Air Mail. Einband bestoßen, daher Mängelexemplar gestempelt, sonst sehr guter Zustand. Imperfect copy due to slightly bumped cover, apart from this in very good condition. Stamped. Sprache: Englisch.

PAP. Zustand: New. New Book. Shipped from UK. Established seller since 2000.