Jain neelesh kumar (21 Ergebnisse)

Zustand: New.

Paperback. Zustand: Brand New. 76 pages. 9.00x6.00x0.25 inches. In Stock.

Zustand: As New. Unread book in perfect condition.

Zustand: New.

Zustand: As New. Unread book in perfect condition.

Paperback. Zustand: Brand New. 224 pages. 9.21x6.14x0.48 inches. In Stock.

Buch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - This work describes an experimental investigation with the aim to evaluate and establish wire spark erosion machining (WSEM) as a viable alternative for high quality miniature gear manufacturing. External spur type miniature brass (ASTM 858) gears with 12 teeth, 9.8 mm outside diameter and 5 mm face width were manufactured by WSEM. The research work was accomplished in four distinct experimental stages viz., preliminary, pilot, main and confirmation. The aim, scope and findings of each stage are progressively presented and discussed. In essence, the investigation found that it was possible to manufacture miniature gears to high quality by using WSEM. Gears up to DIN 5 quality with a good surface finish (1.2 µm average roughness) and satisfactory surface integrity were achieved. The results suggest that WSEM should be considered a viable alternative to conventional miniature gear manufacturing techniques and that in some instances it may even be superior. This work will prove useful toresearchers and professionals in the field of miniature and micro-scale manufacturing and machining.…

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - This work describes an experimental investigation with the aim to evaluate and establish wire spark erosion machining (WSEM) as a viable alternative for high quality miniature gear manufacturing. External spur type miniature brass (ASTM 858) gears with 12 teeth, 9.8 mm outside diameter and 5 mm face width were manufactured by WSEM. The research work was accomplished in four distinct experimental stages viz., preliminary, pilot, main and confirmation. The aim, scope and findings of each stage are progressively presented and discussed. In essence, the investigation found that it was possible to manufacture miniature gears to high quality by using WSEM. Gears up to DIN 5 quality with a good surface finish (1.2 µm average roughness) and satisfactory surface integrity were achieved. The results suggest that WSEM should be considered a viable alternative to conventional miniature gear manufacturing techniques and that in some instances it may even be superior. This work will prove useful toresearchers and professionals in the field of miniature and micro-scale manufacturing and machining.…

Paperback. Zustand: Brand New. 328 pages. 10.00x7.00x10.00 inches. In Stock.

Paperback. Zustand: Brand New. 230 pages. 8.75x6.00x0.50 inches. In Stock.

Zustand: Sehr gut. Zustand: Sehr gut | Sprache: Englisch | Produktart: Bücher | This work describes an experimental investigation with the aim to evaluate and establish wire spark erosion machining (WSEM) as a viable alternative for high quality miniature gear manufacturing. External spur type miniature brass (ASTM 858) gears with 12 teeth, 9.8 mm outside diameter and 5 mm face width were manufactured by WSEM. The research work was accomplished in four distinct experimental stages viz., preliminary, pilot, main and confirmation. The aim, scope and findings of each stage are progressively presented and discussed. In essence, the investigation found that it was possible to manufacture miniature gears to high quality by using WSEM. Gears up to DIN 5 quality with a good surface finish (1.2 µm average roughness) and satisfactory surface integrity were achieved. The results suggest that WSEM should be considered a viable alternative to conventional miniature gear manufacturing techniques and that in some instances it may even be superior. This work will prove useful toresearchers and professionals in the field of miniature and micro-scale manufacturing and machining.…

Zustand: As New. Unread book in perfect condition.

Zustand: New.

Zustand: As New. Unread book in perfect condition.

Zustand: New.

Zustand: New. Neelesh Kumar Jain is Professor in Mechanical Engineering and Coordinator of Center of Excellence in Gear Engineering at Indian Institute of Technology Indore (India). His research interests are additive manufacturing of metalli.

Zustand: As New. Unread book in perfect condition.

Hardcover. Zustand: Brand New. 272 pages. 9.18x6.12x9.45 inches. In Stock.

Zustand: New.

Zustand: New. Dr. Neelesh Kumar Mehra is working as Assistant Professor of Pharmaceutics, at Department of Pharmaceutics, National Institute of Pharmaceutical Education &amp Research (NIPER), Hyderabad, India. He earned his PhD with Prof. N.K. Jain f.

Buch. Zustand: Neu. Neuware.