Ismail g (30 Ergebnisse)

Hard covers, dust jacket. Zustand: Fine. Zustand des Schutzumschlags: Fine. 1st edition. Scarcely used. Weight: 1 Language: English.

hardcover. Zustand: Sehr gut. 320 Seiten; 9780851996752.2 Gewicht in Gramm: 1.

Paperback. Zustand: Good. No Jacket. Pages can have notes/highlighting. Spine may show signs of wear. ~ ThriftBooks: Read More, Spend Less.

hardcover. Zustand: Gut. Seiten; 9789776163010.3 Gewicht in Gramm: 500.

Zustand: Wie neu. 120 S. Highly Reliable Reconfigurable Real Time Systems explores the design and evaluation of highly reliable reconfigurable real-time systems for demanding computing environments. Mohamed G. Egila discusses concepts such as fault tolerance, embedded systems, system architecture and reconfigurable computing, providing valuable insights into the development of dependable computing solutions. This academic work is an excellent resource for students, researchers and professionals in computer engineering, embedded systems and real-time computing. Warum dieses Buch interessant ist: o Explores highly reliable and reconfigurable real-time computing systems. o Covers embedded systems, fault tolerance and system architecture. o Valuable for students and researchers in computer and electronic engineering. o Addresses technologies used in safety-critical and industrial applications. o Excellent academic reference for advanced computing and engineering research. Butterfly Books Wissensnotiz: Highly reliable real-time systems are essential in fields such as aerospace, medical technology and industrial automation, where dependable computing and rapid system response are critical for safety and performance. HC-918-6 /8-01397556 Sprache: Englisch Gewicht in Gramm: 186 Taschenbuch, Maße: 15.2 cm x 0.7 cm x 22.9 cm.…

Zustand: New.

Zustand: As New. Unread book in perfect condition.

Paperback. Zustand: Brand New. 136 pages. 8.66x5.91x0.31 inches. In Stock.

Hardcover. Zustand: Brand New. 144 pages. 8.50x5.43x8.50 inches. In Stock.

Zustand: New. In English.

Zustand: New. In English.

Zustand: New. In English.

Zustand: New. In English.

Zustand: New. In English.

Zustand: New. In English.

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - These are the proceedings of the conference 'Symbolic Computation, Number Theory, Special Functions, Physics and Combinatorics' held at the Department of Mathematics, University of Florida, Gainesville, from November 11 to 13, 1999. The main emphasis of the conference was Com puter Algebra (i. e. symbolic computation) and how it related to the fields of Number Theory, Special Functions, Physics and Combinatorics. A subject that is common to all of these fields is q-series. We brought together those who do symbolic computation with q-series and those who need q-series in cluding workers in Physics and Combinatorics. The goal of the conference was to inform mathematicians and physicists who use q-series of the latest developments in the field of q-series and especially how symbolic computa tion has aided these developments. Over 60 people were invited to participate in the conference. We ended up having 45 participants at the conference, including six one hour plenary speakers and 28 half hour speakers. There were talks in all the areas we were hoping for. There were three software demonstrations.…

Hardcover. Zustand: Brand New. 187 pages. 9.25x6.25x0.50 inches. In Stock.

Zustand: As New. Unread book in perfect condition.

Zustand: Gut. Zustand: Gut | Seiten: 332 | Sprache: Englisch | Produktart: Bücher | The appropriate interconnect model has changed several times over the past two decades due to the application of aggressive technology scaling. New, more accurate interconnect models are required to manage the changing physical characteristics of integrated circuits. Currently, RC models are used to analyze high resistance nets while capacitive models are used for less resistive interconnect. However, on-chip inductance is becoming more important with integrated circuits operating at higher frequencies, since the inductive impedance is proportional to the frequency. The operating frequencies of integrated circuits have increased dramatically over the past decade and are expected to maintain the same rate of increase over the next decade, approaching 10 GHz by the year 2012. Also, wide wires are frequently encountered in important global nets, such as clock distribution networks and in upper metal layers, and performance requirements are pushing the introduction of new materials for low resistance interconnect, such as copper interconnect already used in many commercial CMOS technologies. On-Chip Inductance in High Speed Integrated Circuits deals with the design and analysis of integrated circuits with a specific focus on on-chip inductance effects. It has been described throughout this book that inductance can have a tangible effect on current high speed integrated circuits. For example, neglecting inductance and using an RC interconnect model in a production 0.25 mum CMOS technology can cause large errors (over 35%) in estimates of the propagation delay of on-chip interconnect. It has also been shown that including inductance in the repeater insertion design process as compared to using an RC model improves the overall repeater solution in terms of area, power, and delay with average savings of 40.8%, 15.6%, and 6.7%, respectively. On-Chip Inductance in High Speed Integrated Circuitsis full of design and analysis techniques for RLC interconnect. These techniques are compared to techniques traditionally used for RC interconnect design to emphasize the effect of inductance. On-Chip Inductance in High Speed Integrated Circuits will be of interest to researchers in the area of high frequency interconnect, noise, and high performance integrated circuit design.…

Paperback. Zustand: Brand New. reprint edition. 296 pages. 9.50x6.30x0.70 inches. In Stock.

Zustand: Gut. Zustand: Gut | Seiten: 332 | Sprache: Englisch | Produktart: Bücher | The appropriate interconnect model has changed several times over the past two decades due to the application of aggressive technology scaling. New, more accurate interconnect models are required to manage the changing physical characteristics of integrated circuits. Currently, RC models are used to analyze high resistance nets while capacitive models are used for less resistive interconnect. However, on-chip inductance is becoming more important with integrated circuits operating at higher frequencies, since the inductive impedance is proportional to the frequency. The operating frequencies of integrated circuits have increased dramatically over the past decade and are expected to maintain the same rate of increase over the next decade, approaching 10 GHz by the year 2012. Also, wide wires are frequently encountered in important global nets, such as clock distribution networks and in upper metal layers, and performance requirements are pushing the introduction of new materials for low resistance interconnect, such as copper interconnect already used in many commercial CMOS technologies. On-Chip Inductance in High Speed Integrated Circuits deals with the design and analysis of integrated circuits with a specific focus on on-chip inductance effects. It has been described throughout this book that inductance can have a tangible effect on current high speed integrated circuits. For example, neglecting inductance and using an RC interconnect model in a production 0.25 mum CMOS technology can cause large errors (over 35%) in estimates of the propagation delay of on-chip interconnect. It has also been shown that including inductance in the repeater insertion design process as compared to using an RC model improves the overall repeater solution in terms of area, power, and delay with average savings of 40.8%, 15.6%, and 6.7%, respectively. On-Chip Inductance in High Speed Integrated Circuitsis full of design and analysis techniques for RLC interconnect. These techniques are compared to techniques traditionally used for RC interconnect design to emphasize the effect of inductance. On-Chip Inductance in High Speed Integrated Circuits will be of interest to researchers in the area of high frequency interconnect, noise, and high performance integrated circuit design.…

Zustand: New. Contains research and expository papers in various topics including Number Theory, Special Functions, Physics and Combinatorics. This title also covers the developments in the fields of q-series. It is intended for researchers and graduate students interested in the developments in q-series and symbolic computation. Editor(s): Garvan, Frank G.; Ismail, Mourad E. H. Series: Developments in Mathematics. Num Pages: 286 pages, biography. BIC Classification: PBM. Category: (P) Professional & Vocational; (UP) Postgraduate, Research & Scholarly. Dimension: 235 x 155 x 17. Weight in Grams: 1320. . 2001. Hardback. . . . . Books ship from the US and Ireland.…

Zustand: New. Deals with the design and analysis of integrated circuits with a specific focus on on-chip inductance effects. This book is filled with design and analysis techniques for RLC interconnect. These techniques are compared to techniques traditionally used for RC interconnect design to emphasize the effect of inductance. Num Pages: 303 pages, biography. BIC Classification: TJFC. Category: (P) Professional & Vocational; (UP) Postgraduate, Research & Scholarly; (UU) Undergraduate. Dimension: 234 x 156 x 19. Weight in Grams: 1420. . 2001. Hardback. . . . . Books ship from the US and Ireland.…

Hardcover. Zustand: Brand New. 1st edition. 336 pages. 9.50x6.25x1.00 inches. In Stock.

Zustand: As New. Unread book in perfect condition.

Hardcover. Zustand: gut. 2001. On-Chip Inductance in High Speed Integrated Circuits In englischer Sprache. pages.

Zustand: As New. Unread book in perfect condition.

Zustand: As New. Unread book in perfect condition.

No Binding. Zustand: Very Good. First. A fine original colour lithograph from Vanity Fair, a magazine which was published from 1869-1914, featuring a large caricature portrait each week. These were drawn by various artists, the most famous of whom was Leslie Ward who used the 'nom de crayon' of "Spy". This portrait will come mounted/matted and ready to frame using archivist quality materials, mount size 18 x 12 inches, 47 x 31 cms. It will be presented in a cellophane wrapper with our label guaranteeing authenticity. We pack very well, between sheets of hardboard. This is an excellent opportunity to purchase a portrait of the Marquis of Westminster, with the caption "The ex-Khedive" with biographical details. Isma'il Pasha, known as Ismail the Magnificent(December 31, 1830 - March 2, 1895), was Wali and subsequently Khedive of Egypt and Sudan from 1863 until he was removed at the behest of the British in 1879. Drawn By T (illustrator).…

Zustand: Sehr gut. Zustand: Sehr gut | Produktart: Bücher | Keine Beschreibung verfügbar.