hubert fred (53 Ergebnisse)

Hardcover. Zustand: Très bon. Ancien livre de bibliothèque. Légères traces d'usure sur la couverture. Ammareal reverse jusqu'à 15% du prix net de cet article à des organisations caritatives. ENGLISH DESCRIPTION Book Condition: Used, Very good. Former library book. Slight signs of wear on the cover. Ammareal gives back up to 15% of this item's net price to charity organizations.

Zustand: Bon. Ancien livre de bibliothèque avec équipements. Tome 1. Ammareal reverse jusqu'à 15% du prix net de cet article à des organisations caritatives. ENGLISH DESCRIPTION Book Condition: Used, Good. Former library book. Volume 1. Ammareal gives back up to 15% of this item's net price to charity organizations.

* Umfang/Format: 158 Seiten : Illustrationen; ; 18 cm * Erscheinungsjahr: 1975 * Gesamttitel: Kompass-Bücherei ; Bd. 190 * Einbandart und Originalverkaufspreis: kartoniert : M 1.80 gepflegtes Exemplar, kaum Lesespuren, Buchblock altersgemäß gebräunt, SEHR SCHÖN!!! * Verlag: Berlin : Verlag Neues Leben.

Zustand: Bon. Ancien livre de bibliothèque avec équipements. Tome 1. Ammareal reverse jusqu'à 15% du prix net de cet article à des organisations caritatives. ENGLISH DESCRIPTION Book Condition: Used, Good. Former library book. Volume 1. Ammareal gives back up to 15% of this item's net price to charity organizations.

8°, Broschur, ohne Schutzumschlag, geringe Gebrauchsspuren am Einband und Block, Block sauber und fest ohne Einträge Einband leicht berieben Stichworte: Das Neue Abenteuer 32 Deutsch 450g.

Zustand: Neuf.

Softcover. 26,5 x 18,5 cm. 3 Originalbroschuren. Die Einbände sind leicht angestaubt, die Rückenbezüge an wenigen Stellen etwas ausgerissen bis zu 5 cm. 101 durchgehend paginierte Seiten mit vielen einfarbigen Abbildungen im Text und auf 8 Tafeln. Innen sauber und in gutem Zustand. --- 4 brochures originales. Les reliures sont légèrement poussiéreuses, les couvertures arrière sont légèrement déchirées jusqu'à 5 cm à quelques endroits. 101 pages paginées avec de nombreuses illustrations monochromes dans le texte et sur 8 planches. Intérieur propre et en bon état. --- 4 opuscoli originali. Gli attacchi sono leggermente impolverati, le copertine posteriori strappate fino a 5 cm in alcuni punti. 101 pagine impaginate con molte illustrazioni monocromatiche nel testo e su 8 tavole. Interni puliti e in buone condizioni. -- Bitte Portokosten außerhalb EU erfragen! / Please ask for postage costs outside EU! / S ' il vous plait demander des frais de port en dehors de l ' UE! // Bitte beachten Sie auch unsere Fotos! / Please also note our photos! / Veuillez noter nos photos -- Lesen Sie etwas Schönes auf einer Bank in der Frühlingssonne! Wir haben die passende Lektüre. -- Wir kaufen Ihre werthaltigen Bücher! K02250-419299.

Zustand: gut - gebraucht. TB, 159 S., Buch in gutem altersbedingtem Zustand, ohne Namenseintragung, ohne Widmung, Einband mit leichten Gebrauchsspuren, Text sehr gut, Inhalt sehr gut, Zustand: 3, gut - gebraucht, TB, Kompass Neues Leben, Berlin, , 1975 159 S., Zeitsprung ins Ungewisse, Hubert, Fred.

18 cm, kart., 158 Seiten , Einbandkanten teils bestoßen, Seiten gebräunt, ansonsten in gutem, gebrauchten Zustand, Der junge Physiker John Delano, Mitarbeiter am Forschungsinstitut für nukleare Antriebe, ist beunruhigt. Nicht genug damit, dass er ein Notizbuch in einer Sprache findet, die es noch gar nicht gibt, daß ein harmloser Fernsehapparat plötzlich grüne Strahlen aussendet, die eine Vase zerstören, und da5 ein Unbekannter in seine Wohnung eindringt, der anscheinend nach dem seltsamen Notizbuch sucht. Als Johns Verlobte Doris Lee bei einem Ausflug ins Landesinnere Australiens auch noch ein Raumschiff entdeckt, das wie ein riesiger Baumkuchen aussieht, beginnt eine Kette von aufregenden und so unwahrscheinlichen Abenteuern, daß sich Johns Verdacht er- härtet: Einer seiner Freunde muß ein Mensch aus der Zukunft sein! (aus dem Buch) Beschreibung vom Antiquariat Ardelt 3g5b Antiquariat Ardelt Sprache: Deutsch Gewicht in Gramm: 130.

Zustand: gut - gebraucht. 158 Seiten, Taschenbuch Zustand: 3, gut - gebraucht, Neues Leben Berlin , , Zeitsprung ins Ungewisse. Kompass-Bücherei Nr. 190, Hubert, Fred.

Zustand: Gut - gebraucht. Broschiert Guter Zustand, ohne Namenseintrag Zustand: 3, Gut - gebraucht, Broschiert Neues Leben Kompass , 1975 , Zeitsprung ins Ungewisse. Wissenschaftlich-phantastische Erzählung, Fred Hubert.

324 pages (C.559).

Ill. 32 S. Ill.O.Broschur 8° (Einband minimal berieben, Name auf Titelseite) Das Neue Abenteuer 338 Sprache: de.

Ill. 32 S. Ill.O.Broschur 8° (Einband minimal berieben) Das Neue Abenteuer 338 Sprache: de.

Paperback. Zustand: Brand New. 152 pages. French language. 11.81x8.82x0.71 inches. In Stock.

Relie, demi - toile brune, plats mabre, couverture sali, couverture d' editeur conservee, 13x17,5cm, 104pp, illustre n/b. L' association des ingenieurs sortis de l' Ecole de Liege. Tome 1: Les chaudieres et le chauffage. 9ieme edition revue et considerablement augmentee. 777 g.

Zustand: befriedigend. Sprache: deutsch Taschenbuch ,

Zustand: befriedigend. Sprache: deutsch Hardcover ,ausgemustertes Bibliotheksexemplar.

Zustand: New.

Broché. Zustand: Bon état. in-8 Description :290 pp. Dos sali. Langue : Français Nb de volumes : 1.

Zustand: New. In.

Zustand: New. In.

Zustand: New. In.

Zustand: New. In.

Taschenbuch. Zustand: Neu. Global Consistency of Tolerances | Proceedings of the 6th CIRP International Seminar on Computer-Aided Tolerancing, University of Twente, Enschede, The Netherlands, 22-24 March, 1999 | Hubert Kals (u. a.) | Taschenbuch | xii | Englisch | 2010 | Springer | EAN 9789048151981 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu.

Taschenbuch. Zustand: Neu. Integration of Process Knowledge into Design Support Systems | Proceedings of the 1999 CIRP International Design Seminar, University of Twente, Enschede, The Netherlands, 24-26 March, 1999 | Hubert Kals (u. a.) | Taschenbuch | xii | Englisch | 2010 | Springer | EAN 9789048151998 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu.

Gebunden. Zustand: New. Proceedings of the 1999 CIRP International Design Seminar, University of Twente, Enschede, The Netherlands, 24-26 March 1999 Design is a fundamental creative human activity. This certainly applies to the design of artefacts, the realisation of which .

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - This book contains selected contributions from the 6th CIRP International Seminar on Computer-Aided Tolerancing, which was held on 22-24 March, 1999, at the University of Twente, Enschede, The Netherlands. This volume presents the theory and application of consistent tolerancing. Until recently CADCAM systems did not even address the issue of tolerances and focused purely on nominal geometry. Therefore, CAD data was only of limited use for the downstream processes. The latest generation of CADCAM systems incorporates functionality for tolerance specification. However, the lack of consistency in existing tolerancing standards and everyday tolerancing practice still lead to ill-defined products, excessive manufacturing costs and unexpected failures. Research and improvement of education in tolerancing are hot items today. Global Consistency of Tolerances gives an excellent overview of the recent developments in the field of Computer-Aided Tolerancing, including such topics as tolerance specification; tolerance analysis; tolerance synthesis; tolerance representation; geometric product specification; functional product analysis; statistical tolerancing; education of tolerancing; computational metrology; tolerancing standards; and industrial applications and CAT systems. This book is well suited to users of new generation CADCAM systems who want to use the available tolerancing possibilities properly. It can also be used as a starting point for research activities.

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - Design is a fundamental creative human activity. This certainly applies to the design of artefacts, the realisation of which has to meet many constraints and ever raising criteria. The world in which we live today, is enormously influenced by the human race. Over the last century, these artefacts have dramatically changed the living conditions of humans. The present wealth in very large parts of the world, depends on it. All the ideas for better and new artefacts brought forward by humans have gone through the minds of designers, who have turned them into feasible concepts and subsequently transformed them into realistic product models. The designers have been, still are, and will remain the leading 'change agents' in the physical world. Manufacturability of artefacts has always played a significant role in design. In pre industrial manufacturing, the blacksmith held the many design and realisation aspects of a product in one hand. The synthesis of the design and manufacturing aspects took, almost implicitly, place in the head of the man. All the knowledge and the skills were stored in one person. Education and training took place along the line of many years of apprenticeship. When the production volumes increased, -'assembling to measure' was no longer tolerated and production efficiency became essential - design, process planning, production planning and fabrication became separated concerns. The designers created their own world, separated from the production world. They argued that restrictions in the freedom of designing would badly influence their creativity in design.

Buch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - This book contains selected contributions from the 6th CIRP International Seminar on Computer-Aided Tolerancing, which was held on 22-24 March, 1999, at the University of Twente, Enschede, The Netherlands. This volume presents the theory and application of consistent tolerancing. Until recently CADCAM systems did not even address the issue of tolerances and focused purely on nominal geometry. Therefore, CAD data was only of limited use for the downstream processes. The latest generation of CADCAM systems incorporates functionality for tolerance specification. However, the lack of consistency in existing tolerancing standards and everyday tolerancing practice still lead to ill-defined products, excessive manufacturing costs and unexpected failures. Research and improvement of education in tolerancing are hot items today. Global Consistency of Tolerances gives an excellent overview of the recent developments in the field of Computer-Aided Tolerancing, including such topics as tolerance specification; tolerance analysis; tolerance synthesis; tolerance representation; geometric product specification; functional product analysis; statistical tolerancing; education of tolerancing; computational metrology; tolerancing standards; and industrial applications and CAT systems. This book is well suited to users of new generation CADCAM systems who want to use the available tolerancing possibilities properly. It can also be used as a starting point for research activities.