Zustand: acceptable. Ausreichend/Acceptable: Exemplar mit vollständigem Text und sämtlichen Abbildungen oder Karten. Schmutztitel oder Vorsatz können fehlen. Einband bzw. Schutzumschlag weisen unter Umständen starke Gebrauchsspuren auf. / Describes a book or dust jacket that has the complete text pages (including those with maps or plates) but may lack endpapers, half-title, etc. (which must be noted). Binding, dust jacket (if any), etc may also be worn.
Anbieter: medimops, Berlin, Deutschland
Zustand: good. Befriedigend/Good: Durchschnittlich erhaltenes Buch bzw. Schutzumschlag mit Gebrauchsspuren, aber vollständigen Seiten. / Describes the average WORN book or dust jacket that has all the pages present.
Verlag: Franz Steiner,Wiesbaden, 2005
Anbieter: Fabri Antiquariat Dr. Jürgen Aschoff, Ulm, BW, Deutschland
Erstausgabe
Werkstoffe nach Maß. belastbare Prognose durch Simulation? Vorgetragen in der Plenarsitzung am 23. Februar 2004, ausgegeben am 18. März 2005. (Akad. d. Wiss. u. d. Literatur in Mainz. Abhandlungen der mathematisch-naturwissenschaftlichen Klasse 2005, Nr 1). Getitelt. original Paperback 25x17,5 cm. Mit: zahlr. Ill., graph. Darstellungen. Mit 1 CD-ROM. Erstausgabe. Sauber und frisch, ungelesen. 35 S. isbn 3515087168.
Anbieter: Antiquariat Thomas Haker GmbH & Co. KG, Berlin, Deutschland
Verbandsmitglied: GIAQ
EUR 8,40
Anzahl: 1 verfügbar
In den WarenkorbPaperback. Zustand: Gut. XXII, 559 S. : Ill. Ex.-Libr., Good condition. Sprache: Englisch Gewicht in Gramm: 1245.
Verlag: Steiner Stuttgart 2005, 2005
Anbieter: Antiquariat Thomas & Reinhard, Recklinghausen, NRW, Deutschland
Broschiert, 35 Seiten, mit CD-ROM, tadelloser Zustand. Shipping to abroad insured with tracking number.
Verlag: Aachen, 1974
Anbieter: Wissenschaftliches Antiquariat Köln Dr. Sebastian Peters UG, Köln, Deutschland
Broschur. Zustand: gut. 79, [43] S. : 56 Ill. u. graph. Darst.; 30 cm, Bibliotheksexemplar, Lichtrand, Aufkleber, Rücken mit Klebestreifen verstärkt, Dreieckstasche. Sprache: deu.
Sprache: Deutsch
Verlag: Springer, Berlin ; Heidelberg ; New York ; Barcelona ; Budap, 2001
ISBN 10: 3540419616 ISBN 13: 9783540419617
Anbieter: Gebrauchtbücherlogistik H.J. Lauterbach, Gummersbach, NRW, Deutschland
Broschiert. Zustand: Gut. 2. Aufl. 24cm; XVI, 472 S. Broschiert; Ill., graph. Darst. Zustand: Sehr Gut eher ungelesen (Innen); Besitzerstempel; Einband (Außen) hat min. bis geringe Gebrauchsspuren; * Die Photos sind original von uns erstellt worden, u.a. erkennbar an einem kleinen weißen Stück Papier im oberen Schnitt. Ab und an verwenden Suchmaschinen Verlagsphotos, bei den Portalen selbst, werden aber nur unsere Originalphotos gezeigt.
Anbieter: medimops, Berlin, Deutschland
Zustand: good. Befriedigend/Good: Durchschnittlich erhaltenes Buch bzw. Schutzumschlag mit Gebrauchsspuren, aber vollständigen Seiten. / Describes the average WORN book or dust jacket that has all the pages present.
hardcover. Zustand: Befriedigend. 516 Seiten; 9783540401391.4 Gewicht in Gramm: 1.
Anbieter: WorldofBooks, Goring-By-Sea, WS, Vereinigtes Königreich
EUR 76,20
Anzahl: 1 verfügbar
In den WarenkorbHardback. Zustand: Very Good. The book has been read, but is in excellent condition. Pages are intact and not marred by notes or highlighting. The spine remains undamaged.
Zustand: New. This is a Brand-new US Edition. This Item may be shipped from US or any other country as we have multiple locations worldwide.
Anbieter: Borkert, Schwarz und Zerfaß GbR, Berlin, Deutschland
Originalbroschur. Zustand: Gut. 63 S. Ein gutes und sauberes Exemplar. - Werkstoffe sind Festkörper, die sich technisch verwerten lassen. Das trifft auf die traditionellen Metalle, Keramiken und Gläser ebenso zu wie für die neuartigen teils exotischen Funktionswerkstoffe. Trotz aller Entwicklung hat sich aus vielerlei Gründen ein rezepturverhaftetes Denken und ein Hauch von Alchemie bis heute erhalten, speziell in den Ingenieurwissenschaften, obgleich die modernen Werkstoffe, unerheblich ob Keramik, Kupfer oder Stahl mit den vorgeschichtlichen Werkstoffen außer der groben chemischen Zusammensetzung praktisch nichts gemein haben. / Der Baustoff des Geotechnikers ist der natürlich gewachsene Untergrund. Dieser ist im Gegensatz zu einem industriell unter kontrollierten Bedingungen gefertigten Baustoff aufgrund seiner Entstehungsgeschichte und seiner Ablagerungsbedingungen mehr oder minder inhomogen. Es muss daher mit örtlich und zum Teil auch zeitlich streuenden Bodenkennwerten gerechnet werden. Erschwerend kommt hinzu, dass wir mit unseren üblichen Untersuchungsmethoden wie Bohrungen oder Sondierungen den Untergrund nicht flächenhaft erkunden können, sondern nur nadelstichartig Informationen über den Untergrundaufbau erhalten. Deshalb werden wir selbst dann, wenn wir mit genormten Feld- oder Laborversuchen Kennwerte bestimmen, immer streuende Ergebnisse erhalten. ISBN 9783506701091 Sprache: Deutsch Gewicht in Gramm: 158.
Anbieter: medimops, Berlin, Deutschland
Zustand: good. Befriedigend/Good: Durchschnittlich erhaltenes Buch bzw. Schutzumschlag mit Gebrauchsspuren, aber vollständigen Seiten. / Describes the average WORN book or dust jacket that has all the pages present.
Anbieter: Ria Christie Collections, Uxbridge, Vereinigtes Königreich
EUR 91,07
Anzahl: Mehr als 20 verfügbar
In den WarenkorbZustand: New. In.
Anbieter: Buchpark, Trebbin, Deutschland
Zustand: Sehr gut. Zustand: Sehr gut | Seiten: 559 | Sprache: Englisch | Produktart: Bücher | Keine Beschreibung verfügbar.
Anbieter: Ria Christie Collections, Uxbridge, Vereinigtes Königreich
EUR 127,69
Anzahl: Mehr als 20 verfügbar
In den WarenkorbZustand: New. In.
Taschenbuch. Zustand: Neu. Physical Foundations of Materials Science | Günter Gottstein | Taschenbuch | xiv | Englisch | 2010 | Springer | EAN 9783642072710 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu.
Sprache: Englisch
Verlag: Springer Berlin Heidelberg, 2010
ISBN 10: 3642072712 ISBN 13: 9783642072710
Anbieter: AHA-BUCH GmbH, Einbeck, Deutschland
Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - In this vivid and comprehensible introduction to materials science, the author expands the modern concepts of metal physics to formulate basic theory applicable to other engineering materials, such as ceramics and polymers. Written for engineering students and working engineers with little previous knowledge of solid-state physics, this textbook enables the reader to study more specialized and fundamental literature of materials science. Dozens of illustrative photographs, many of them transmission electron microscopy images, plus line drawings, aid developing a firm appreciation of this complex topic. Hard-to-grasp terms such as 'textures' are lucidly explained - not only the phenomenon itself, but also its consequences for the material properties. This excellent book makes materials science more transparent.
Sprache: Englisch
Verlag: Springer Berlin Heidelberg, Springer Berlin Heidelberg, 2004
ISBN 10: 3540401393 ISBN 13: 9783540401391
Anbieter: AHA-BUCH GmbH, Einbeck, Deutschland
Buch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - In this vivid and comprehensible introduction to materials science, the author expands the modern concepts of metal physics to formulate basic theory applicable to other engineering materials, such as ceramics and polymers. Written for engineering students and working engineers with little previous knowledge of solid-state physics, this textbook enables the reader to study more specialized and fundamental literature of materials science. Dozens of illustrative photographs, many of them transmission electron microscopy images, plus line drawings, aid developing a firm appreciation of this complex topic. Hard-to-grasp terms such as 'textures' are lucidly explained - not only the phenomenon itself, but also its consequences for the material properties. This excellent book makes materials science more transparent.
Anbieter: moluna, Greven, Deutschland
EUR 239,03
Anzahl: Mehr als 20 verfügbar
In den WarenkorbGebunden. Zustand: New. Since 1989, Dr. Gunter Gottstein has been director of the Institute of Physical Metallurgy and Metal Physics of the RWTH Aachen University, Germany. He obtained his doctoral degree in Metal Physics from RWTH and, following his Habilitati.
Sprache: Englisch
Verlag: Springer-Verlag GmbH & Co. KG, 2001
ISBN 10: 3540418377 ISBN 13: 9783540418375
Anbieter: Buchpark, Trebbin, Deutschland
Zustand: Sehr gut. Zustand: Sehr gut | Seiten: 1458 | Sprache: Englisch | Produktart: Bücher | Keine Beschreibung verfügbar.
Sprache: Englisch
Verlag: Taylor & Francis Inc Dez 2009, 2009
ISBN 10: 142005435X ISBN 13: 9781420054354
Anbieter: AHA-BUCH GmbH, Einbeck, Deutschland
Buch. Zustand: Neu. Neuware - Grain boundary migration is key to materials microstructural processes such as recrystallization and is essential to the creation of new materials. While this importance is reflected in the literature, this is the first book to focus on the thermodynamics, kinetics, and applications of individual grain boundary migration in metals. This authoritative work contains a wealth of data focused on the experimental techniques in the study of single grain boundary motion and grain boundary systems with junctions and is the only one to discuss grain boundary junction motion. Those wishing to master the material will find worked problems throughout as well as end-of-chapter problems.
8°, paperback, Broschiert. 4., neu bearb. Aufl. 2014. 651 S. Sehr gutes frisches Exemplar, sieht kaum oder nicht gelesen aus. Sprache: Deutsch Gewicht in Gramm: 1017.
Anbieter: preigu, Osnabrück, Deutschland
Taschenbuch. Zustand: Neu. Materialwissenschaft und Werkstofftechnik | Physikalische Grundlagen | Günter Gottstein (u. a.) | Taschenbuch | xvi | Deutsch | 2025 | Springer Spektrum | EAN 9783662683255 | Verantwortliche Person für die EU: Springer Vieweg in Springer Science + Business Media, Abraham-Lincoln-Str. 46, 65189 Wiesbaden, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu.