G sih (43 Ergebnisse)

Zustand: Very Good. *Price HAS BEEN REDUCED by 10% until Monday, Nov. 9 (weekend SALE item)* 196 pp., hardcover, previous owner's name to front free endpaper else very good. - If you are reading this, this item is actually (physically) in our stock and ready for shipment once ordered. We are not bookjackers. Buyer is responsible for any additional duties, taxes, or fees required by recipient's country.…

Zustand: Fair. Volume 5. This is an ex-library book and may have the usual library/used-book markings inside.This book has hardback covers. Clean from markings. In fair condition, suitable as a study copy. No dust jacket. Please note the Image in this listing is a stock photo and may not match the covers of the actual item,650grams, ISBN:902860166X.…

Zustand: Good. Volume 5. This is an ex-library book and may have the usual library/used-book markings inside.This book has hardback covers. Clean from markings. In good all round condition. No dust jacket. Please note the Image in this listing is a stock photo and may not match the covers of the actual item,650grams, ISBN:902860166X.…

Zustand: Good. *Price HAS BEEN REDUCED by 10% until Monday, Nov. 9 (weekend SALE item)* 489 pp., Hardcover, ex library, else text and binding clean and tight. - If you are reading this, this item is actually (physically) in our stock and ready for shipment once ordered. We are not bookjackers. Buyer is responsible for any additional duties, taxes, or fees required by recipient's country.…

KARTONIERT, 489 Seiten, keine Markierungen/Anmerkungen, dies ist dies ist ein regulär ausgesondertes Exemplar aus einer wissenschaftlichen Bibliothek, das Buch ist sehr gut erhalten --- HARDCOVER, LIB.EX., no marks, 489 pages, the book is in a very good condition. Shipping to abroad insured with tracking number.…

Paperback. Zustand: Brand New. 192 pages. 9.25x6.00x0.44 inches. In Stock.

Zustand: Very Good. Minor shelf wear on cover and signatures on inside of front cover and top of title page. Also some light foxing on outer edge of pages on top of book but content is fine.

Zustand: Good. *Price HAS BEEN REDUCED by 10% until Monday, Nov. 9 (weekend SALE item)* 456 pp., hardcover, ex library, else text and binding clean and tight. - If you are reading this, this item is actually (physically) in our stock and ready for shipment once ordered. We are not bookjackers. Buyer is responsible for any additional duties, taxes, or fees required by recipient's country.…

17,8 x 5,7 x 25,4 cm, cloth. Zustand: Gut. 869 S. Ex.-Libr., Good condition. Sprache: Englisch Gewicht in Gramm: 1588.

Hardcover. Zustand: Good.

Hard Cover. Zustand: Good. No Jacket. Ex-library with the usual features. The interior is clean and tight. Binding is good. Cover shows light wear. 260 pages. Ex-Library.

Paperback. Zustand: Brand New. 512 pages. 9.25x6.10x1.16 inches. In Stock.

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - The Second International Symposium on Defects, Fracture and Fatigue took place at Mont Gabriel, Quebec, Canada, May 30 to June 5, 1982, and was organized by the Mechanical Engineering Department of McGill University and Institute of Fracture and Solid Mechanics, Lehigh University. The Co-Chairmen of the Sympo sium were Professor G. C. Sih of Lehigh University and Professor J. W. Provan of McGill University. Among those who served on the Organizing Committee were G. C. Sih (Co-Chairman), J. W. Provan (Co-Chairman), H. Mughrabi, H. Zorski, R. Bullough, M. Matczynski, G. Barenblatt and G. Caglioti. As a result of the interest expressed at the First Symposium that was held in October 1980, in Po land, the need for a follow-up meeting to further explore the phenomena of mate rial damage became apparent. Among the areas considered were dislocations, per sistent-slip-bands, void creation, microcracking, microstructure effects, micro/ macro fracture mechanics, ductile fracture criteria, fatigue crack initiation and propagation, stress and failure analysis, deterministic and statistical crack models, and fracture control. This wide spectrum of topics attracted researchers and engineers in solid state physics, continuum mechanics, applied mathematics, metallurgy and fracture mechanics from many different countries. This spectrum is also indicative of the interdisciplinary character of material damage that must be addressed at the atomic, microscopic and macroscopic scale level.…

Paperback. Zustand: Brand New. 427 pages. 9.61x6.14x0.98 inches. In Stock.

Zustand: Good. Volume 5. This is an ex-library book and may have the usual library/used-book markings inside.This book has hardback covers. In good all round condition. No dust jacket. Please note the Image in this listing is a stock photo and may not match the covers of the actual item,650grams, ISBN:902860166X. …

Zustand: New. This is a Brand-new US Edition. This Item may be shipped from US or any other country as we have multiple locations worldwide.

Zustand: Sehr gut. Zustand: Sehr gut | Seiten: 456 | Sprache: Englisch | Produktart: Bücher | Keine Beschreibung verfügbar.

Zustand: New.

Zustand: As New. Unread book in perfect condition.

Taschenbuch. Zustand: Neu. Multiscaling in Molecular and Continuum Mechanics: Interaction of Time and Size from Macro to Nano | Application to biology, physics, material science, mechanics, structural and processing engineering | G. C. Sih | Taschenbuch | xviii | Englisch | 2010 | Springer | EAN 9789048172702 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu.…

Zustand: New. Starting with technologies concerned with assessing the change in material microstructure in terms of the processing parameters, this work offers methodologies to account for tradeoffs between the fundamental variables such as temperature and pressure that control the product quality. Editor(s): Sih, George C.; Carpinteri, A.; Surace, G. (Dipt. di Ingegneria Aeronautica e Spaziale). Series: Engineering Applications of Fracture Mechanics. Num Pages: 438 pages, biography. BIC Classification: TGM; TRP. Category: (P) Professional & Vocational; (UP) Postgraduate, Research & Scholarly. Dimension: 234 x 156 x 25. Weight in Grams: 818. . 1995. Hardback. . . . . …

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - Contained in the volume are the papers presented at an International Symposium on Advanced Technology for Design and Fabrication of Composite Materials and Structures. The Symposium was organized by Consorzio per la Ricerca e l'Educazione Permanente; Institute of Fracture and Solid Mechanics, Lehigh University, Pennsylvania USA; Dipartimento di Ingegneria Strutturale del Politecnico di Torino; and Dipartimento di Ingegneria Aeronautica e Spaziale del Politecnico di Torino. It was held at the Politecnico di Torino in Italy, May 24-28, 1993. The support from the various organizations is acknowledged as follows: Consiglio N azionale delle Ricerche ALENIA SP AZIO AGUST A CIRA AERMACCHI Centro Ricerche FIAT ALENIA (formerly AERITALIA) Collegio Costruttori Edili della Provincia di Torino As new knowledge is being accumulated on the design and fabrication of advanced composite systems in different sectors of the world, there is the need not only to exchange new ideas but also to disseminate the information from the researchers to the users. The theme of this Symposium is particularly relevant to the automobile, marine, aerospace and construction industry where the competitive edge lies on improved processing and/or manufacturing of the products. Technological advances have been and will continue to depend strongly on the development of new materials and their effective use in design. Empirical trial-and error methods could no longer be considered economically feasible when applied to usage-specific materials such as composites.…

Buch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - Session I: Curing, Bonding and Modelling.- Towards decision making in knowledge-based systems for composite cure.- Adhesive bonding in construction technology.- Nonlinear fracture mechanics models for fibre reinforced materials.- Session II: Composite Fabrication Technology.- Modelling three-dimensional composites.- Design-fabrication-performance relationship of advanced textile structural composites.- Modelling of filament winding technology.- Session III: Structural Behavior of Composites.- Material anisotropy and work strain characterized by stationary values of strain energy density function.- Constitutive laws for fibre reinforced ceramics.- On the fiber-governed bimodular constitutive models.- Genetic algorithms for the design of composite panels.- Session IV: Composite Beams and Plates.- On computational strategies for composite laminates.- Some aspects in the structural modelling of composite laminates.- Transverse cracking in laminated composites.- Some global aspects of fibre reinforcement efficiency in concrete.- Failure behavior and structural design of concrete members reinforced with continuous fiber reinforcing materials.- Session V: Interfaces and Fracture.- Interface structure analysis and fracture behaviour of inorganic composites.- Advanced fibre composites with engineered interfaces.- Interface property tailoring for pseudo strain-hardening cementitious composites.- Session VI: Damage and Fracture.- Experimental determination of the fractal dimension of disordered fracture surfaces.- Damage characterization, damage growth validation and repair consideration of advanced aircraft composite structures.- Near tip measurement of environmental effects on opening and growth of cracks in particulate composites.- Fracture mechanics parameters influencing themechanical properties of concrete composites.- Session VII: Thermoplastic Composites.- Fundamental aspects in manufacturing of thermoplastic composite materials.- Economic manufacturing techniques for continuous fibrereinforced thermoplastics in aircraft and automotive applications.- Forming techniques of advanced thermoplastic composite materials.- Session VIII: Joint, Airframe and Engine.- Bolted joint strength of graphite/epoxy laminates subjected to biaxial loading conditions.- A parametric study of structural adhesive joints for aerospace applications.- Impact damage and residual strength of forward fuselage composite panel.- Application of metal matrix composites for supersonic aeroplane engines.…

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - This volume on multiscaling has been motivated by the advancement of nano-technology in the past four decades. In particular, nano-electronics has paved the way to show that the behavior of nano-size bodies are not only different from macro-size bodies but they do not obey the same physical laws. There appears to be a mesoscopic region which separates the laws of quantum physics and continuum mechanics. A gap has been left in the full range of scaling from macro to nano. Micro-manipulation can be made more effective if the atomic and molecular scale activities can be identified more precisely with the use specific objectives. In this respect, material science has already benefited by positioning and structuring of nanometer-scale particles to arrive at the desired macroscopic material properties. The idea has been implemented to tailor-make structural materials for the Boeing 787 to better accommodate non-uniform stress and strain at different locations of the aircraft. Explored are also the possibility of coaxing DNA-based organisms such as viruses to improve performance of batteries, solar cells, fabrics, paints and other kinds of materials. The potential of assembling bio-molecules to build electronic components is also in the planning. The manipulation of molecules and atoms has been regarded as a common base for both material and life science. Quantum and continuum mechanics are being applied side by side for exploring the behavior of small and large objects moving at fast and slow speed.…

Buch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - This volume on multiscaling has been motivated by the advancement of nano-technology in the past four decades. In particular, nano-electronics has paved the way to show that the behavior of nano-size bodies are not only different from macro-size bodies but they do not obey the same physical laws. There appears to be a mesoscopic region which separates the laws of quantum physics and continuum mechanics. A gap has been left in the full range of scaling from macro to nano. Micro-manipulation can be made more effective if the atomic and molecular scale activities can be identified more precisely with the use specific objectives. In this respect, material science has already benefited by positioning and structuring of nanometer-scale particles to arrive at the desired macroscopic material properties. The idea has been implemented to tailor-make structural materials for the Boeing 787 to better accommodate non-uniform stress and strain at different locations of the aircraft. Explored are also the possibility of coaxing DNA-based organisms such as viruses to improve performance of batteries, solar cells, fabrics, paints and other kinds of materials. The potential of assembling bio-molecules to build electronic components is also in the planning. The manipulation of molecules and atoms has been regarded as a common base for both material and life science. Quantum and continuum mechanics are being applied side by side for exploring the behavior of small and large objects moving at fast and slow speed.…

XLVII, 352 S. OLn. mit OU., sehr gut erhalten. "(= Mechanics of fracture ; 4.)".

Zustand: Gut. Zustand: Gut | Seiten: 460 | Sprache: Englisch | Produktart: Bücher | Contained in the volume are the papers presented at an International Symposium on Advanced Technology for Design and Fabrication of Composite Materials and Structures. The Symposium was organized by Consorzio per la Ricerca e l'Educazione Permanente; Institute of Fracture and Solid Mechanics, Lehigh University, Pennsylvania USA; Dipartimento di Ingegneria Strutturale del Politecnico di Torino; and Dipartimento di Ingegneria Aeronautica e Spaziale del Politecnico di Torino. It was held at the Politecnico di Torino in Italy, May 24-28, 1993. The support from the various organizations is acknowledged as follows: ¿ Consiglio N azionale delle Ricerche ¿ ALENIA SP AZIO ¿ AGUST A ¿ CIRA ¿ AERMACCHI ¿ Centro Ricerche FIAT ¿ ALENIA (formerly AERITALIA) ¿ Collegio Costruttori Edili della Provincia di Torino As new knowledge is being accumulated on the design and fabrication of advanced composite systems in different sectors of the world, there is the need not only to exchange new ideas but also to disseminate the information from the researchers to the users. The theme of this Symposium is particularly relevant to the automobile, marine, aerospace and construction industry where the competitive edge lies on improved processing and/or manufacturing of the products. Technological advances have been and will continue to depend strongly on the development of new materials and their effective use in design. Empirical trial-and­ error methods could no longer be considered economically feasible when applied to usage-specific materials such as composites.…

Zustand: gut. 1979. Fracture Mechanics in Engineering Applications. In deutscher Sprache. pages.

Paperback. Zustand: Brand New. 460 pages. 9.00x6.30x1.04 inches. In Stock.

Paperback. Zustand: Brand New. 478 pages. 9.25x6.00x1.09 inches. In Stock.