Gesamtpreis (1 Artikel Artikel):
Versandziel:
foster lowell (28 Ergebnisse)
Direkt zu den wichtigsten Suchergebnissen
Suchfilter
Produktart
- Alle Product Types
- Bücher (28)
- Magazine & Zeitschriften (Keine weiteren Ergebnisse entsprechen dieser Verfeinerung)
- Comics (Keine weiteren Ergebnisse entsprechen dieser Verfeinerung)
- Noten (Keine weiteren Ergebnisse entsprechen dieser Verfeinerung)
- Kunst, Grafik & Poster (Keine weiteren Ergebnisse entsprechen dieser Verfeinerung)
- Fotografien (Keine weiteren Ergebnisse entsprechen dieser Verfeinerung)
- Karten (Keine weiteren Ergebnisse entsprechen dieser Verfeinerung)
- Manuskripte & Papierantiquitäten (Keine weiteren Ergebnisse entsprechen dieser Verfeinerung)
Zustand Mehr dazu
- Neu (4)
- Wie Neu, Sehr Gut oder Gut Bis Sehr Gut (Keine weiteren Ergebnisse entsprechen dieser Verfeinerung)
- Gut oder Befriedigend (18)
- Ausreichend oder Schlecht (6)
- Wie beschrieben (Keine weiteren Ergebnisse entsprechen dieser Verfeinerung)
Einband
Weitere Eigenschaften
- Erstausgabe (1)
- Signiert (Keine weiteren Ergebnisse entsprechen dieser Verfeinerung)
- Schutzumschlag (Keine weiteren Ergebnisse entsprechen dieser Verfeinerung)
- Angebotsfoto (4)
Sprache (2)
Gratisversand
Land des Verkäufers
Verkäuferbewertung
-
Geo-Metrics III: The Application of Geometric Dimensioning and Tolerancing Techniques (Using the Customary Inch Systems): The Application of Geometric . Application of Geometric Tolerancing Vol 1
Anbieter: Dream Books Co., Denver, CO, USA
Verkäuferbewertung 5 von 5 Sternen
Zustand: acceptable. This copy has clearly been enjoyedâ"expect noticeable shelf wear and some minor creases to the cover. Binding is strong, and all pages are legible. May contain previous library markings or stamps.
-
geo-metrics_ii-the_application_of_geometric_tolerancing_techniques_using
Anbieter: ThriftBooks-Dallas, Dallas, TX, USA
Verkäuferbewertung 5 von 5 Sternen
Paperback. Zustand: Good. No Jacket. Pages can have notes/highlighting. Spine may show signs of wear. ~ ThriftBooks: Read More, Spend Less.
-
geo-metrics_ii-the_application_of_geometric_tolerancing_techniques_using
Anbieter: ThriftBooks-Dallas, Dallas, TX, USA
Verkäuferbewertung 5 von 5 Sternen
Paperback. Zustand: Fair. No Jacket. Readable copy. Pages may have considerable notes/highlighting. ~ ThriftBooks: Read More, Spend Less.
-
geo-metrics_ii-the_application_of_geometric_tolerancing_techniques_using
Anbieter: ThriftBooks-Dallas, Dallas, TX, USA
Verkäuferbewertung 5 von 5 Sternen
Paperback. Zustand: Very Good. No Jacket. May have limited writing in cover pages. Pages are unmarked. ~ ThriftBooks: Read More, Spend Less.
-
geo-metrics_ii-the_application_of_geometric_tolerancing_techniques_using
Anbieter: ThriftBooks-Atlanta, AUSTELL, GA, USA
Verkäuferbewertung 5 von 5 Sternen
Paperback. Zustand: Very Good. No Jacket. May have limited writing in cover pages. Pages are unmarked. ~ ThriftBooks: Read More, Spend Less.
-
Geo-Metrics III: The Application of Geometric Dimensioning and Tolerancing Techniques (Using the Customary Inch Systems): The Application of Geometric . Application of Geometric Tolerancing Vol 1
Anbieter: Dream Books Co., Denver, CO, USA
Verkäuferbewertung 5 von 5 Sternen
Zustand: good. Gently used with minimal wear on the corners and cover. A few pages may contain light highlighting or writing, but the text remains fully legible. Dust jacket may be missing, and supplemental materials like CDs or codes may not be included. May be ex-library with library markings. Ships promptly!
-
Geo-Metrics III: The Application of Geometric Dimensioning and Tolerancing Techniques (Using the Customary Inch Systems)
Anbieter: ThriftBooks-Atlanta, AUSTELL, GA, USA
Verkäuferbewertung 5 von 5 Sternen
Paperback. Zustand: Fair. No Jacket. Readable copy. Pages may have considerable notes/highlighting. ~ ThriftBooks: Read More, Spend Less.
-
Geo-Metrics III: The Application of Geometric Dimensioning and Tolerancing Techniques (Using the Customary Inch Systems)
Anbieter: ThriftBooks-Dallas, Dallas, TX, USA
Verkäuferbewertung 5 von 5 Sternen
Paperback. Zustand: Fair. No Jacket. Readable copy. Pages may have considerable notes/highlighting. ~ ThriftBooks: Read More, Spend Less.
-
Geo-Metrics III: The Application of Geometric Dimensioning and Tolerancing Techniques (Using the Customary Inch Systems)
Anbieter: ThriftBooks-Atlanta, AUSTELL, GA, USA
Verkäuferbewertung 5 von 5 Sternen
Paperback. Zustand: Good. No Jacket. Pages can have notes/highlighting. Spine may show signs of wear. ~ ThriftBooks: Read More, Spend Less.
-
Geo-Metrics III: The Application of Geometric Dimensioning and Tolerancing Techniques (Using the Customary Inch Systems)
Anbieter: ThriftBooks-Dallas, Dallas, TX, USA
Verkäuferbewertung 5 von 5 Sternen
Paperback. Zustand: Good. No Jacket. Pages can have notes/highlighting. Spine may show signs of wear. ~ ThriftBooks: Read More, Spend Less.
-
Geo-Metrics II As Based upon Harmonization of National and International Standards Practices
Anbieter: Books From California, Simi Valley, CA, USA
Verkäuferbewertung 4 von 5 Sternen
hardcover. Zustand: Good. library stamp on the head and tail of the book.
-
Geo-Metrics III: The Applicati
Anbieter: World of Books (was SecondSale), Montgomery, IL, USA
Verkäuferbewertung 5 von 5 Sternen
Zustand: Good. Item in good condition. Textbooks may not include supplemental items i.e. CDs, access codes etc.
-
Geo-Metrics II : The Application of Geometric Tolerancing Techniques (Using Cusomary Inch System)
Sprache: Englisch
Verlag: Addison-Wesley Longman, Incorporated, 1986
ISBN 10: 0201115271 ISBN 13: 9780201115277
Anbieter: Better World Books: West, Reno, NV, USA
Verkäuferbewertung 5 von 5 Sternen
Zustand: Very Good. rev Edition. Pages intact with possible writing/highlighting. Binding strong with minor wear. Dust jackets/supplements may not be included. Stock photo provided. Product includes identifying sticker. Better World Books: Buy Books. Do Good.
-
Geo-Metrics II : The Application of Geometric Tolerancing Techniques (Using Cusomary Inch System)
Sprache: Englisch
Verlag: Addison-Wesley Longman, Incorporated, 1986
ISBN 10: 0201115271 ISBN 13: 9780201115277
Anbieter: Better World Books, Mishawaka, IN, USA
Verkäuferbewertung 5 von 5 Sternen
Zustand: Good. rev Edition. Pages intact with minimal writing/highlighting. The binding may be loose and creased. Dust jackets/supplements are not included. Stock photo provided. Product includes identifying sticker. Better World Books: Buy Books. Do Good.
-
Geo-Metrics II : The Application of Geometric Tolerancing Techniques (Using Cusomary Inch System)
Sprache: Englisch
Verlag: Addison-Wesley Longman, Incorporated, 1986
ISBN 10: 0201115271 ISBN 13: 9780201115277
Anbieter: Better World Books, Mishawaka, IN, USA
Verkäuferbewertung 5 von 5 Sternen
Zustand: Very Good. rev Edition. Pages intact with possible writing/highlighting. Binding strong with minor wear. Dust jackets/supplements may not be included. Stock photo provided. Product includes identifying sticker. Better World Books: Buy Books. Do Good.
-
Geo-Metrics III : The Application of Geometric Dimensioning and Tolerancing Techniques (Using the Customary Inch Systems)
Anbieter: Better World Books: West, Reno, NV, USA
Verkäuferbewertung 5 von 5 Sternen
Zustand: Very Good. (rev)94 Edition. Former library copy. Pages intact with possible writing/highlighting. Binding strong with minor wear. Dust jackets/supplements may not be included. Includes library markings. Stock photo provided. Product includes identifying sticker. Better World Books: Buy Books. Do Good.
-
Geo-Metrics III : The Application of Geometric Dimensioning and Tolerancing Techniques (Using the Customary Inch Systems)
Anbieter: Better World Books, Mishawaka, IN, USA
Verkäuferbewertung 5 von 5 Sternen
Zustand: Good. (rev)94 Edition. Pages intact with minimal writing/highlighting. The binding may be loose and creased. Dust jackets/supplements are not included. Stock photo provided. Product includes identifying sticker. Better World Books: Buy Books. Do Good.
-
Geo-Metrics: The Metric Application of Geometric Tolerancing Techniques, Revised 1986 Edition (2nd Edition)
Anbieter: ThriftBooks-Atlanta, AUSTELL, GA, USA
Verkäuferbewertung 5 von 5 Sternen
Paperback. Zustand: Fair. No Jacket. Readable copy. Pages may have considerable notes/highlighting. ~ ThriftBooks: Read More, Spend Less.
-
Geo-Metrics: The Metric Application of Geometric Tolerancing Techniques, Revised 1986 Edition (2nd Edition)
Anbieter: ThriftBooks-Atlanta, AUSTELL, GA, USA
Verkäuferbewertung 5 von 5 Sternen
Paperback. Zustand: Good. No Jacket. Pages can have notes/highlighting. Spine may show signs of wear. ~ ThriftBooks: Read More, Spend Less.
-
Geo-Metrics II: The Application of International Geometric Tolerancing Techniques to Design (Using Customary Inch System)
Sprache: Englisch
Verlag: Addison Wesley Publishing Company, 1979
ISBN 10: 0201019361 ISBN 13: 9780201019360
Anbieter: ThriftBooks-Atlanta, AUSTELL, GA, USA
Verkäuferbewertung 5 von 5 Sternen
Paperback. Zustand: Fair. No Jacket. Readable copy. Pages may have considerable notes/highlighting. ~ ThriftBooks: Read More, Spend Less.
-
Introduction to Geometric Dimensioning and Tolerancing
Sprache: Englisch
Verlag: National Tooling & Machining Association, 1987
ISBN 10: 0910399182 ISBN 13: 9780910399180
Anbieter: Better World Books: West, Reno, NV, USA
Verkäuferbewertung 5 von 5 Sternen
Zustand: Very Good. Former library copy. Pages intact with possible writing/highlighting. Binding strong with minor wear. Dust jackets/supplements may not be included. Includes library markings. Stock photo provided. Product includes identifying sticker. Better World Books: Buy Books. Do Good.
-
Geo-Metrics IIIM: The Metric Application of Geometric Dimensioning and Tolerancing Techniques
Anbieter: ThriftBooks-Dallas, Dallas, TX, USA
Verkäuferbewertung 5 von 5 Sternen
Paperback. Zustand: Good. No Jacket. Pages can have notes/highlighting. Spine may show signs of wear. ~ ThriftBooks: Read More, Spend Less.
-
Modern Geometric Dimensioning and Tolerancing with Workbook Section
Verlag: National Tooling and Machining Association
Anbieter: ThriftBooks-Dallas, Dallas, TX, USA
Verkäuferbewertung 5 von 5 Sternen
Paperback. Zustand: Good. No Jacket. Pages can have notes/highlighting. Spine may show signs of wear. ~ ThriftBooks: Read More, Spend Less.
-
Geometric Dimensioning and Tolerancing: A Working Guide
Verlag: Addison Wesley, Reading, Mass, 1970
Anbieter: Between the Covers-Rare Books, Inc. ABAA, Gloucester City, NJ, USA
Verbandsmitglied: ABAA ESA ILAB IOBA
Verkäuferbewertung 5 von 5 Sternen
Erstausgabe
Softcover. Zustand: Very Good. First edition. Very good in a Wire spiral binding. Covers show some shelfwear rubbing, internals are clean.
-
Geo-Metrics Iiim: The Metric Application of Geometric Tolerancing Techniques : As Based upon Harmonization of National and International Standards P
Anbieter: Revaluation Books, Exeter, Vereinigtes Königreich
Verkäuferbewertung 5 von 5 Sternen
EUR 58,74
EUR 14,59 Versand
Versand von Vereinigtes Königreich nach USAAnzahl: 2 verfügbar
In den WarenkorbPaperback. Zustand: Brand New. subsequent edition. 368 pages. 11.00x8.75x0.50 inches. In Stock.
-
Geo-Metrics IIIM: The Metric Application of Geometric Dimensioning and Tolerancing Techniques
Sprache: Englisch
Verlag: ADDISON WESLEY PUB CO INC, 1993
ISBN 10: 0201633434 ISBN 13: 9780201633436
EUR 37,70
EUR 48,99 Versand
Versand von Deutschland nach USAAnzahl: Mehr als 20 verfügbar
In den WarenkorbKartoniert / Broschiert. Zustand: New. KlappentextrnrnThis is an indispensable guide and reference for anyone involved in engineering design, drafting, manufacturing, quality, and verification of product.
-
Geo-Metrics III As Based upon Harmonization of National and International Standards Practices: The Application of Geometric Tolerancing Techniques (Using the Customary Inch System)
Anbieter: Revaluation Books, Exeter, Vereinigtes Königreich
Verkäuferbewertung 5 von 5 Sternen
EUR 86,33
EUR 14,59 Versand
Versand von Vereinigtes Königreich nach USAAnzahl: 1 verfügbar
In den WarenkorbPaperback. Zustand: Brand New. subsequent edition. 368 pages. 11.00x8.50x0.50 inches. In Stock.
-
Geo-Metrics IIIM : The Metric Application of Geometric Dimensioning and Tolerancing Techniques
Sprache: Englisch
Verlag: Pearson Education Dez 1993, 1993
ISBN 10: 0201633434 ISBN 13: 9780201633436
Anbieter: AHA-BUCH GmbH, Einbeck, Deutschland
Verkäuferbewertung 5 von 5 Sternen
Taschenbuch. Zustand: Neu. Neuware - This is an indispensable guide and reference for anyone involved in engineering design, drafting, manufacturing, quality, and verification of product.
