Anbieter: Ria Christie Collections, Uxbridge, Vereinigtes Königreich
EUR 162,50
Anzahl: Mehr als 20 verfügbar
In den WarenkorbZustand: New. In.
Anbieter: Majestic Books, Hounslow, Vereinigtes Königreich
EUR 177,54
Anzahl: 1 verfügbar
In den WarenkorbZustand: New.
Anbieter: preigu, Osnabrück, Deutschland
Taschenbuch. Zustand: Neu. Measuring Rheological Properties of Cement-based Materials | State-of-the-Art Report of the RILEM Technical Committee 266-MRP | Mohammed Sonebi (u. a.) | Taschenbuch | xxvi | Englisch | 2024 | Springer | EAN 9783031367458 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu.
Sprache: Englisch
Verlag: Springer Nature Switzerland, Springer Nature Switzerland, 2024
ISBN 10: 3031367456 ISBN 13: 9783031367458
Anbieter: AHA-BUCH GmbH, Einbeck, Deutschland
Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - This book presents the work of the RILEM TC 266-MRP, whose purpose was to enhance the reliability of rheological measurements performed on cement-based materials. It makes users more aware of potential sources of errors in the measurements, and provide guidelines on how to observe, counteract or eliminate the errors. Improving the reliability of rheological measurements will further enhance the use of rheology to investigate different aspects of the fresh properties of cement-based materials. After an introduction into mix design and applications, the book delivers a comprehensive overview of rheology definitions, behavior, and parameters; rheometers; measuring and analysis procedures; difficulties and challenges during measurements; relationships with specific empirical tests; and the behavior of concrete near a surface. This report on the measurement of rheological properties of complex materials such as concrete enables readers to understand the applicable concepts of rheology, and address the challenges on the measuring procedures, the rheological models and some errors and limitations of rheometers used.
Sprache: Englisch
Verlag: Springer Nature Switzerland, 2023
ISBN 10: 3031367421 ISBN 13: 9783031367427
Anbieter: AHA-BUCH GmbH, Einbeck, Deutschland
Buch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - This book presents the work of the RILEM TC 266-MRP, whose purpose was to enhance the reliability of rheological measurements performed on cement-based materials. It makes users more aware of potential sources of errors in the measurements, and provide guidelines on how to observe, counteract or eliminate the errors. Improving the reliability of rheological measurements will further enhance the use of rheology to investigate different aspects of the fresh properties of cement-based materials. After an introduction into mix design and applications, the book delivers a comprehensive overview of rheology definitions, behavior, and parameters; rheometers; measuring and analysis procedures; difficulties and challenges during measurements; relationships with specific empirical tests; and the behavior of concrete near a surface. This report on the measurement of rheological properties of complex materials such as concrete enables readers to understand the applicable concepts of rheology, and address the challenges on the measuring procedures, the rheological models and some errors and limitations of rheometers used.
Anbieter: Revaluation Books, Exeter, Vereinigtes Königreich
EUR 231,53
Anzahl: 2 verfügbar
In den WarenkorbHardcover. Zustand: Brand New. 227 pages. 9.25x6.10x9.21 inches. In Stock.
Anbieter: Ria Christie Collections, Uxbridge, Vereinigtes Königreich
EUR 307,34
Anzahl: Mehr als 20 verfügbar
In den WarenkorbZustand: New. In.
Anbieter: Ria Christie Collections, Uxbridge, Vereinigtes Königreich
EUR 307,34
Anzahl: Mehr als 20 verfügbar
In den WarenkorbZustand: New. In.
Zustand: Sehr gut. Zustand: Sehr gut | Seiten: 458 | Sprache: Englisch | Produktart: Bücher | The Sixth International RILEM Symposium on SCC and the Fourth North-American Conference on the Design and Use of SCC were held on Sept 26-29, 2010 in Montreal, Quebec, Canada. Approximately 130 papers were presented at the general sessions in addition to other papers discussed during the poster session. The main purpose of this conference was to bring together representatives from industry, universities, and government agencies to present the latest information on the science and technology of SCC and to discuss research needs and market acceptance of this evolving technology.The RILEM series of symposia started in 1999 in Stockholm, followed by Tokyo in 2001, Reykjavik in 2003, Chicago in 2005, and Ghent in 2007. The North-American Conference on the Design and Use of SCC was held in Chicago in 2002, 2005, and 2008. Both series of conferences enjoyed great success with a steadily increasing number of papers, participants, and interest from across globe.
Zustand: Sehr gut. Zustand: Sehr gut | Seiten: 458 | Sprache: Englisch | Produktart: Bücher | The Sixth International RILEM Symposium on SCC and the Fourth North-American Conference on the Design and Use of SCC were held on Sept 26-29, 2010 in Montreal, Quebec, Canada. Approximately 130 papers were presented at the general sessions in addition to other papers discussed during the poster session. The main purpose of this conference was to bring together representatives from industry, universities, and government agencies to present the latest information on the science and technology of SCC and to discuss research needs and market acceptance of this evolving technology.The RILEM series of symposia started in 1999 in Stockholm, followed by Tokyo in 2001, Reykjavik in 2003, Chicago in 2005, and Ghent in 2007. The North-American Conference on the Design and Use of SCC was held in Chicago in 2002, 2005, and 2008. Both series of conferences enjoyed great success with a steadily increasing number of papers, participants, and interest from across globe.
Taschenbuch. Zustand: Neu. Design, Production and Placement of Self-Consolidating Concrete | Proceedings of SCC2010, Montreal, Canada, September 26-29, 2010 | Kamal Henri Khayat (u. a.) | Taschenbuch | xiii | Englisch | 2012 | Springer | EAN 9789400733107 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu.
Buch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - Dear Colleagues, We are pleased to organize the Sixth International RILEM Symposium on SCC and the Fourth North-American Conference on the Design and Use of SCC, held on Sept 26-29, 2010 in Montreal, Quebec, Canada. The RILEM series of symposia started in 1999 in Stockholm, followed by Tokyo in 2001, Reykjavik in 2003, Chicago in 2005, and Ghent in 2007 with a steadily increasing number of papers, participants, and interest from across the globe. Due to the growing success of SCC, regional conferences have been organized, such as the North-American Conference on the Design and Use of SCC held in Chicago in 2002, 2005, and 2008; the International Symposium on Design, Performance and Use of SCC held nd in Changsa, China in 2005 and in Beijing, China in 2009; as well as the 2 International Conference on Advances in Concrete Technology in the Middle East: SCC held in Abu Dhabi in 2009. It can be concluded that these regional Conferences and Symposia were highly successful and reached a far more international audience than anticipated. Nearly 100 papers were submitted for these proceedings from which the International Scientific Committee selected 37 contributions covering a wide range of timely and original subjects from around the world. We would like to acknowledge the input of the International Scientific Committee for providing critical input to guarantee high quality of these peer-reviewed proceedings. We invite you to explore a wealth of information in the electronic proceedings.
Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - Dear Colleagues, We are pleased to organize the Sixth International RILEM Symposium on SCC and the Fourth North-American Conference on the Design and Use of SCC, held on Sept 26-29, 2010 in Montreal, Quebec, Canada. The RILEM series of symposia started in 1999 in Stockholm, followed by Tokyo in 2001, Reykjavik in 2003, Chicago in 2005, and Ghent in 2007 with a steadily increasing number of papers, participants, and interest from across the globe. Due to the growing success of SCC, regional conferences have been organized, such as the North-American Conference on the Design and Use of SCC held in Chicago in 2002, 2005, and 2008; the International Symposium on Design, Performance and Use of SCC held nd in Changsa, China in 2005 and in Beijing, China in 2009; as well as the 2 International Conference on Advances in Concrete Technology in the Middle East: SCC held in Abu Dhabi in 2009. It can be concluded that these regional Conferences and Symposia were highly successful and reached a far more international audience than anticipated. Nearly 100 papers were submitted for these proceedings from which the International Scientific Committee selected 37 contributions covering a wide range of timely and original subjects from around the world. We would like to acknowledge the input of the International Scientific Committee for providing critical input to guarantee high quality of these peer-reviewed proceedings. We invite you to explore a wealth of information in the electronic proceedings.
Anbieter: Revaluation Books, Exeter, Vereinigtes Königreich
EUR 445,95
Anzahl: 2 verfügbar
In den WarenkorbPaperback. Zustand: Brand New. 2010 edition. 472 pages. 9.25x6.10x1.08 inches. In Stock.