Dimiter driankov (40 Ergebnisse)

hardcover. Zustand: Good. Most items will be dispatched the same or the next working day. A copy that has been read but remains in clean condition. All of the pages are intact and the cover is intact and the spine may show signs of wear. The book may have minor markings which are not specifically mentioned.…

hardcover. Zustand: Very Good. Most items will be dispatched the same or the next working day. A copy that has been read, but is in excellent condition. Pages are intact and not marred by notes or highlighting. The spine remains undamaged.

gebundene Ausgabe. Zustand: Gut. 316 Seiten; Das hier angebotene Buch stammt aus einer teilaufgelösten wissenschaftlichen Bibliothek und trägt die entsprechenden Kennzeichnungen (Rückenschild, Instituts-Stempel.); Schnitt und Einband sind etwas staubschmutzig; der Buchzustand ist ansonsten ordentlich und dem Alter entsprechend gut. Text in ENGLISCHER Sprache! Sprache: Englisch Gewicht in Gramm: 650.…

Zustand: Good. Your purchase helps support Sri Lankan Children's Charity 'The Rainbow Centre'. Ex-library, so some stamps and wear, but in good overall condition. Our donations to The Rainbow Centre have helped provide an education and a safe haven to hundreds of children who live in appalling conditions.…

Pappe, arb. ill., gebunden. 0. 24 cm, XV, 316 S. , graph. Darst., Pappe, arb. ill., gebunden, Buch sehr gut erhalten, Einband minimal berieben, kaum Gebrauchsspuren RW 11 R 6/B Sprache: Englischglisch 0,680 gr.

Hardcover. Zustand: Like New. First Edition. Hardback book in nearly new condition: clean and bright, firm and square, sharp corners, strong joints. Contents crisp and fresh, no pen-marks, just showing a small Department of Aerospace stamp at the endpaper. Overall: looks and feels unread. Pages: xiii, 184. Fully indexed. Model Based Fuzzy Control uses a given conventional or fuzzy open loop model of the plant under control to derive the set of fuzzy rules for the fuzzy controller. Of central interest are the stability, performance, and robustness of the resulting closed loop system. The major objective of model based fuzzy control is to use the full range of linear and nonlinear design and analysis methods to design such fuzzy controllers with better stability, performance, and robustness properties than non-fuzzy controllers designed using the same techniques. This objective has already been achieved for fuzzy sliding mode controllers and fuzzy gain schedulers - the main topics of this book. The primary aim of the book is to serve as a guide for the practitioner and to provide introductory material for courses in control theory. …

Zustand: New. This is a Brand-new US Edition. This Item may be shipped from US or any other country as we have multiple locations worldwide.

1st ed. 17 x 25 cm. 421 pages. Hardcover. Versand aus Deutschland / We dispatch from Germany via Air Mail. Einband bestoßen, daher Mängelexemplar gestempelt, sonst sehr guter Zustand. Imperfect copy due to slightly bumped cover, apart from this in very good condition. Stamped. Sprache: Englisch.

Zustand: New. This is a Brand-new US Edition. This Item may be shipped from US or any other country as we have multiple locations worldwide.

Zustand: New. This is a Brand-new US Edition. This Item may be shipped from US or any other country as we have multiple locations worldwide.

Zustand: New. This is a Brand-new US Edition. This Item may be shipped from US or any other country as we have multiple locations worldwide.

Zustand: Used. pp. 344 49:B&W 6.14 x 9.21 in or 234 x 156 mm (Royal 8vo) Perfect Bound on White w/Gloss Lam.

Hardcover. Zustand: Very Good. Immediate dispatch from Somerset. Nice book in great condition. Pages in excellent condition. Hardcover. English. See images for condition. About the book >.>.> In both cases it is enough to translate the operator's manual control algorithm in terms of a set of fuzzy if-then rules in order to obtain an equally good. or an even better, wholy automatic control system incorporating an FLC. This implies that the design of an FLC can only be done after a "control algorithm" already exists. In the first case, the existing control algorithm may consist of sequential and/or parallel manual control actions performed by the operator upon a process whose mathematical model is either impossible to derive or of neg-ligible utility for cost related reasons. In this case the FLC simply makes explicit the existing manual control knowledge, and consequently automates the use of this knowledge thus becoming a part of the closed loop system. In the second case, the existing control algorithm is a conventional control algorithm in need of additional manual "trimming". An FLC is then again used to automate the manual "trimming" algorithm employed by the oper-ator and thus acts as a supervisor.…

Zustand: Used. pp. 344.

Zustand: Used.

Zustand: Used.

Zustand: New. In English.

Zustand: New. In English.

Zustand: New. In English.

Zustand: New. In English.

Zustand: New. In English.

Zustand: New. In English.

Zustand: New. This is a Brand-new US Edition. This Item may be shipped from US or any other country as we have multiple locations worldwide.

Paperback. Zustand: Brand New. 319 pages. French language. 9.50x6.50x0.75 inches. In Stock.

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - This volume contains the thoroughly refereed and revised papers accepted for presentation at the IJCAI '91 Workshops on Fuzzy Logic and Fuzzy Control, held during the International Joint Conference on AI at Sydney, Australia in August 1991. The 14 technical contributions are devoted to several theoretical and applicational aspects of fuzzy logic and fuzzy control; they are presented in sections on theoretical aspects of fuzzy reasoning and fuzzy control, fuzzy neural networks, fuzzy control applications, fuzzy logic planning, and fuzzy circuits. In addition, there is a substantial introduction by the volume editors on the latest developments in the field that brings the papers presented into line. …

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - During the past few years two principally different approaches to the design of fuzzy controllers have emerged: heuristics-based design and model-based design. The main motivation for the heuristics-based design is given by the fact that many industrial processes are still controlled in one of the following two ways: - The process is controlled manually by an experienced operator. - The process is controlled by an automatic control system which needs manual, on-line 'trimming' of its parameters by an experienced operator. In both cases it is enough to translate in terms of a set of fuzzy if-then rules the operator's manual control algorithm or manual on-line 'trimming' strategy in order to obtain an equally good, or even better, wholly automatic fuzzy control system. This implies that the design of a fuzzy controller can only be done after a manual control algorithm or trimming strategy exists. It is admitted in the literature on fuzzy control that the heuristics-based approach to the design of fuzzy controllers is very difficult to apply to multiple-inputjmultiple-output control problems which represent the largest part of challenging industrial process control applications. Furthermore, the heuristics-based design lacks systematic and formally verifiable tuning tech niques. Also, studies of the stability, performance, and robustness of a closed loop system incorporating a heuristics-based fuzzy controller can only be done via extensive simulations.…

Paperback. Zustand: Gut. 319 S. Engineering Technique Computer Science Informatik Ingenieurwesen Pages very good. Guter Zustand/ Good With ill. Ex-Library. gebraucht; gut Pages very good. Guter Zustand/ Good With ill. Ex-Library. ha1067144 Sprache: Englisch Gewicht in Gramm: 550.

Taschenbuch. Zustand: Neu. Advances in Fuzzy Control | Dimiter Driankov (u. a.) | Taschenbuch | Studies in Fuzziness and Soft Computing | viii | Englisch | 2013 | Physica | EAN 9783662110539 | Verantwortliche Person für die EU: Physica Verlag in Springer Science + Business Media, Tiergartenstr. 15-17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu. …

Paperback/ broschiert. Zustand: Gut. 157 S. EDV Guter Zustand/ Good With numerous figures. Bibl-Ex. ha1060538 Sprache: Englisch Gewicht in Gramm: 250.

Zustand: Sehr gut. Zustand: Sehr gut | Sprache: Englisch | Produktart: Bücher | This volume contains the thoroughly refereed and revised papers accepted for presentation at the IJCAI '91 Workshops on Fuzzy Logic and Fuzzy Control, held during the International Joint Conference on AI at Sydney, Australia in August 1991. The 14 technical contributions are devoted to several theoretical and applicational aspects of fuzzy logic and fuzzy control; they are presented in sections on theoretical aspects of fuzzy reasoning and fuzzy control, fuzzy neural networks, fuzzy control applications, fuzzy logic planning, and fuzzy circuits. In addition, there is a substantial introduction by the volume editors on the latest developments in the field that brings the papers presented into line. …