Dieter schuocker (28 Ergebnisse)

Zustand: Good. Volume 2. This is an ex-library book and may have the usual library/used-book markings inside.This book has hardback covers. In good all round condition. Please note the Image in this listing is a stock photo and may not match the covers of the actual item,1100grams, ISBN:9780412819209. …

Zustand: Very Good. Very Good+; Hardcover; Covers are still glossy; Unblemished textblock edges; The endpapers and all text pages are clean and unmarked; The binding is excellent with a straight spine; This book will be shipped in a sturdy cardboard box with foam padding; Medium Format (8.5" - 9.75" tall); 1.8 lbs; Dark blue covers with title in white and yellow lettering; 1999, Springer-Verlag Publishing; 448 pages; "Handbook of the Eurolaser Academy," by Dieter Schuocker. …

Zustand: Very Good. Very Good+; Hardcover; Covers are still glossy; Unblemished textblock edges; The endpapers and all text pages are clean and unmarked; The binding is excellent with a straight spine; This book will be shipped in a sturdy cardboard box with foam padding; Medium Format (8.5" - 9.75" tall); 2.2 lbs; Dark blue covers with title in white and yellow lettering; 1999, Springer-Verlag Publishing; 671 pages; "Handbook of the EuroLaser Academy," by Dieter Schuocker. …

Zustand: Used.

Zustand: Used.

Zustand: New. In English.

Zustand: New. In English.

HRD. Zustand: New. New Book. Shipped from UK. Established seller since 2000.

PAP. Zustand: New. New Book. Shipped from UK. Established seller since 2000.

HRD. Zustand: New. New Book. Shipped from UK. Established seller since 2000.

Paperback. Zustand: Brand New. 442 pages. 9.25x6.10x1.01 inches. In Stock.

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - The European Community regards training as a priority area and has therefore developed a series of programmes in the field of vocational training. This book is the result of a pilot project selected under two of these Community Action Programmes. It was initially selected under the COMETT programme, concerned with the development of continuing vocational training in the European Community. Moreover, it was one of the few selected projects to receive further funding under a second selection in the context of the LEONARDO DA VINCI Action Programme for the implementation of a European Community Vocational Training policy. It is with great pleasure that I present the outcome of this project which embodies one of the fundamental objectives of the LEONARDO DA VINCI Programme -training for new technologies in SMEs, which make a significant contribution to economic development in Europe. K DRAXLER Director Directorate General XXII European Commission x Acknowledgements The Volume Editor gratefully acknowledges funding by the LEONARDO DA VINCI Programme of the Commission of the European Community and by the Austrian Federal Ministry of Science and Transport whose financial support has made the EuroLaser Academy a reality and has led directly to the generation ofthis handbook. He is also indebted to Director Dr. Klaus Draxler, Head of the LEONARDO DA VINCI Programme, DG XXII of the Commission of the European Community, moreover to Director General Raul Kneucker, Minister's Advisor Helmut Schacher and Mrs. Friederike Pranckl-Kloepfer from the Austrian Federal Ministry of Science and Transport.…

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - If in some processes oxygen is used, additional energy is provided at a rate P ch by chemical reactions. The flow of energy per unit time can then be written: (1. 2) From the above it can be made clear that it is the rate of energy fluxes, i. e. 2 intensities [J/ms] that determines into which channel the energy goes and how the interaction zone will be modified in its state (solid, liquid, gaseous) and geometrical shape (plane, dip, deep hole) -in other words which kind of treatment process will be established (hardening, welding, drilling etc. ). In the following, it will be shown that, in fact, it is the intensity of the beam, which together with the interaction time, primarily governs the interaction phenomena. 1. 1. 2 Laser beam properties determining interaction and energy coupling etJeets In order to yield an efficient process, it is necessary to obtain adequate intensity at the workpiece and to couple a fraction of the incident power as high as possible into the material. The beam properties being of importance in this respect are, (Hugel, 1992): 1. the wavelength A. , governing, in principle, the focusability and absorptivity; 2. the polarisation, having considerable influence on the absorptivity for large angles of incidence; 3. the power P which together with the achievable spot diameter d L f determines the intensity in the interaction zone; 4.…

Zustand: New. In English.

Zustand: New. In English.

OSkaibd.m.Oumschl. Zustand: Sehr gut. Zustand des Schutzumschlags: Gut. 8 OSkaibd.m.Oumschl. en Laser, Naturwissenschaften, Physik XIV pp., 448 pp. Schutzumschlag: Gut.

Zustand: New. In English.

Zustand: New.

Hardcover. Zustand: Brand New. 260 pages. 9.00x6.00x0.71 inches. In Stock.

Zustand: New. In German.

Taschenbuch. Zustand: Neu. Handbook of the Eurolaser Academy | Volume 1 | Dieter Schuocker | Taschenbuch | xii | Englisch | 2012 | Springer | EAN 9781461374169 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu.…

Paperback. Zustand: Brand New. 166 pages. German language. 9.50x6.70x0.47 inches. In Stock.

Buch. Zustand: Neu. Neuware - 1 Basic Laser Mechanisms.- 2 Optics, Resonators and Beams.- 3 Carbon Dioxide Lasers.- 4 Solid State Lasers.- 5 Excimer Lasers.- 6 Semiconductor Lasers.- 7 Safety.- 8 Beam Manipulation.

Buch. Zustand: Neu. Neuware - 1 Interaction Phenomena.- 1.1 Introduction.- 1.2 Energy coupling.- 1.3 Interaction phenomena.- 1.4 Significance of coupling and interaction phenomena in laser treatment processes.- 1.5 References.- 2 Materials and Workpiece Classification.- 2.1 General aspects.- 2.2 Crystalline materials.- 2.3 Material classes and their properties.- 2.4 Laser treatment.- 2.5 Testing of materials.- 2.6 Seam geometry workpiece classification.- 2.7 Technological considerations.- 2.8 References.- 3 Cutting.- 3.1 Introduction.- 3.2 Process characteristics, advantages, disadvantages.- 3.3 Principles and theory in laser cutting.- 3.4 Productivity and obtainable cut qualities.- 3.5 Processing parameters.- 3.6 Safety in laser cutting.- 3.7 System types.- 3.8 Industrial applications.- 3.9 References.- 4 Welding.- 4.1 Introduction.- 4.2 Heat sources produced by laser beams.- 4.3 Behaviour of materials during laser welding.- 4.4 Engineering applications.- 4.5 Parameters to consider in the economic analysis of laser welding.- 4.6 References.- 5 Heat Treatment.- 5.1 Introduction.- 5.2. Process systematic of laser surface treatments.- 5.3 Conclusions and final remarks.- 5.4 Acknowledgements.- 5.5 References.- 6 Forming and Rapid Prototyping.- 6.1 The laser forming process.- 6.2 Process simulation.- 6.3 Applications and similar processes.- 6.4 List of variables.- 6.5 References.- 7 Marking and Scribing.- 7.1 Introduction.- 7.2 Marking methods.- 7.3 Systems.- 7.4 Economic aspects.- 7.5 References.- 8 Precision Ablation Processing.- 8.1 Introduction.- 8.2 Ablation mechanisms.- 8.3 Material interactions and applications.- 8.4 Laser ablation systems.- 8.5 Economical aspects.- 8.6 References.- 8.7 List of symbols.- 9 Drilling.- 9.1 Introduction.- 9.2 Mechanisms, models and techniques.- 9.3 Applications in the gas turbine industry.- 9.4 Other applications.- 9.5 References.- 10 Economics.- 10.1 Introduction.- 10.2 The laser process in perspective.- 10.3 Economic factors.- 10.4 Assessment methods.- 10.5 Case studies.- 10.6 Summary.- 10.7 Further reading.- 11 Assessment of Technology.- 11.1 Assessment of laser technology.- 11.2 Competing technologies.- 11.3 Assessment of laser machines.- 11.4 Test methods for laser systems.- 11.5 Quality evaluation of laser processed components.- 11.6 Basic economic considerations.- 11.7 References.- 12 Modelling.- 12.1 Basic equations and techniques.- 12.2 Analytical models.- 12.3 Numerical solutions.- 12.4 Semi quantitative models.- 12.5 References.…

Zustand: gut. 1999. High Power Lasers in Production Engineering. With many figures In deutscher Sprache. pages.

Taschenbuch. Zustand: Neu. Neuware - Der Leser bekommt einen Überblick über die wichtigsten Verfahren der spanlosen Fertigung sowie deren physikalische Grundlagen vermittelt. Hierbei wurden auch für Nichtphysiker verständliche Beschreibungen gewählt, bei denen einfache Plausibilitätsbetrach tungen den Schwerpunkt bilden. Die Erläuterung von Zusammen hängen zwischen Prozessparametern und Bearbeitungsergebnissen unterstützt die Anknüpfung an die praktische Anwendung.…

Taschenbuch. Zustand: Neu. Spanlose Fertigung | Dieter Schuöcker | Taschenbuch | IX | Deutsch | 2006 | De Gruyter Oldenbourg | EAN 9783486580228 | Verantwortliche Person für die EU: Walter de Gruyter GmbH, De Gruyter GmbH, Genthiner Str. 13, 10785 Berlin, productsafety[at]degruyterbrill[dot]com | Anbieter: preigu.…

Zustand: Sehr gut. Zustand: Sehr gut | Sprache: Deutsch | Produktart: Bücher | Kompakte Einführung in die spanlosen Bearbeitungstechniken zur Herstellung von 2-D- oder 3-D-Bauteilen durch Abtragen (Bohren, Schneiden, Gravieren), Auftragen (Beschichten, Schweißen, Rapid Prototyping) und Umformen (Biegen, Tiefziehen, Strangpressen, Schmieden). Das Buch vermittelt grundlegende Kenntnisse der genannten Verfahren und ermöglicht dem Leser, diese Verfahren in vereinfachter Weise rechnerisch zu beschreiben (z.B.: Bearbeitungsgeschwindigkeit in Abhängigkeit von Werkstück- und Prozessparametern, notwendiger Energieaufwand für die Bearbeitung etc.).…