Verkäufer
medimops, Berlin, Deutschland
Verkäuferbewertung 5 von 5 Sternen
AbeBooks-Verkäufer seit 10. Mai 2010
Befriedigend/Good: Durchschnittlich erhaltenes Buch bzw. Schutzumschlag mit Gebrauchsspuren, aber vollständigen Seiten. / Describes the average WORN book or dust jacket that has all the pages present. Bestandsnummer des Verkäufers M01107511224-G
This book is a self-contained introduction to the aerodynamic and thermodynamic design of modern civil and military jet engine design. Through two engine design projects for a large passenger and a new fighter aircraft, the text explains modern engine design. Individual sections cover aircraft requirements, aerodynamics, principles of gas turbines and jet engines, elementary compressible fluid mechanics, bypass ratio selection, scaling and dimensional analysis, turbine and compressor design and characteristics, design optimization, and off-design performance. The civil aircraft, which was the core of the Part 1 of earlier editions, has now been in service for several years as the Airbus A380. Attention in the aircraft industry has now shifted to two-engine aircraft with a greater emphasis on reduction of fuel burn, so the model created for Part 1 is the new efficient aircraft, a twin aimed at high efficiency.
Über die Autorinnen und Autoren:
Nicholas Cumpsty is a Professor Emeritus at Imperial College London. He conducted his postgraduate research at the University of Cambridge, where he was awarded a PhD for a dissertation entitled 'The Calculation of Three-Dimensional Turbulent Boundary Layers'. He has been a Professor of Aerothermal Technology at the University of Cambridge and a visiting professor at the Massachusetts Institute of Technology. Nick has also worked at Rolls Royce Ltd as a Senior Noise Engineer and, more recently, as a Chief Technologist.
Andrew Heyes is Professor of Mechanical Engineering and Head of Department in Mechanical and Aerospace Engineering at the University of Strathclyde. He has previously held positions at the University of Leeds and Imperial College London, where he spent a number of years teaching engine design based on the second edition of Jet Propulsion. Before Imperial, he worked with Rolls-Royce and British Aerospace (Military Aircraft Division, Warton). He is a Chartered Engineer and Fellow of the Institution of Mechanical Engineers.
Titel: Jet Propulsion
Verlag: Cambridge University Press
Erscheinungsdatum: 2015
Einband: Softcover
Zustand: good
Auflage: 3. Auflage
Anbieter: Anybook.com, Lincoln, Vereinigtes Königreich
Zustand: Good. This is an ex-library book and may have the usual library/used-book markings inside.This book has soft covers. In good all round condition. Please note the Image in this listing is a stock photo and may not match the covers of the actual item,750grams, ISBN:9781107511224. Artikel-Nr. 5568088
Anzahl: 1 verfügbar
Anbieter: Better World Books Ltd, Dunfermline, Vereinigtes Königreich
Zustand: Very Good. Ships from the UK. Former library book; may include library markings. Used book that is in excellent condition. May show signs of wear or have minor defects. Artikel-Nr. 52301944-20
Anzahl: 1 verfügbar
Anbieter: Better World Books Ltd, Dunfermline, Vereinigtes Königreich
Zustand: Very Good. Ships from the UK. Used book that is in excellent condition. May show signs of wear or have minor defects. Artikel-Nr. 48667223-6
Anzahl: 1 verfügbar
Anbieter: Better World Books Ltd, Dunfermline, Vereinigtes Königreich
Zustand: Good. Ships from the UK. Former library book; may include library markings. Used book that is in clean, average condition without any missing pages. Artikel-Nr. 48668849-20
Anzahl: 2 verfügbar
Anbieter: AHA-BUCH GmbH, Einbeck, Deutschland
Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - 3rd edition. Artikel-Nr. 9781107511224
Anzahl: 1 verfügbar
Anbieter: Revaluation Books, Exeter, Vereinigtes Königreich
Paperback. Zustand: Brand New. 3rd edition. 351 pages. 9.75x6.75x0.75 inches. In Stock. Artikel-Nr. x-1107511224
Anzahl: 2 verfügbar