Micro- and Opto-Electronic Materials and Structures: Physics, Mechanics, Design, Reliability, Packaging: Volume I Materials Physics - Materials ... Physical Design - Reliability and Packaging - Hardcover

Über die Autorin bzw. den Autor

Dr. Ephraim Suhir is Distinguished Member of Technical Staff (retired), Basic Research, Physical Sciences and Engineering Research Division, Bell Labs, Murray Hill, NJ. He is currently on the faculty of the Electrical Engineering Department, University of California, Santa Cruz, CA and the Department of Mechanical Engineering, University of Maryland, College Park, MD. Dr. Suhir is Fellow of the American Physical Society (APS), the Institute of Electrical and Electronics Engineers (IEEE), the American Society of Mechanical Engineers (ASME), and the Society of Plastics Engineers (SPE). He is co-founder (with Dr. Peter Engel) of the ASME Journal of Electronic Packaging and served as its Technical Editor for eight years (1993-2001).   He has received numerous distinguished service and professional awards, including 2004 ASME Worcester Read Warner Medal for outstanding contributions to the permanent literature of engineering; 2001 IMAPS John A. Wagnon Technical Achievement Award for outstanding contributions to the technical knowledge of the microelectronics, optoelectronics, and packaging industry; 2000 IEEE-CPMT Outstanding Sustained Technical Contribution Award for outstanding, sustained and continuing contributions to the technologies in fields encompassed by the CPMT Society; 2000 SPE International Engineering/Technology (Fred O. Conley) Award for outstanding pioneering and continuing contributions to plastics engineering; and 1999 ASME and Pi-Tau-Sigma Charles Russ Richards Memorial Award for outstanding contributions to mechanical engineering.

Prof. C. P. Wong is a Regents’ Professor and the Charles Smithgall Institute Endowed Chair at the School of Materials Science and Engineering at Georgia Institute of technology. After his doctoral study, he was awarded a two-year postdoctoral fellowship with Nobel Laureate Professor Henry Taube at Stanford University.  He joined AT&T BellLaboratories in 1977 as a member of the technical staff and in 1992, he was elected as an AT&T Bell Laboratories Fellow for his fundamental contributions to low-cost high performance plastic packaging of semiconductors. Since 1996, he is a Professor at the School of Materials Science and Engineering at the Georgia Institute of Technology. He has received many awards, among those, the AT&T Bell Labs Fellow Award in 1992, the IEEE CPMT Society Outstanding and Best Paper Awards in 1990, 1991, 1994, 1996, 1998, 2002, the IEEE CPMT Society Outstanding Sustained Technical Contributions Award in 1995, the IEEE Third Millennium Medal in 2000, the IEEE EAB Education Award in 2001, the IEEE CPMT Society Exceptional Technical Contributions Award in 2002 and the IEEE Components, Packaging and Manufacturing Technology Field Award in 2006.  Dr. Wong is a Fellow of the IEEE, AIC, and AT&T Bell Labs, and was the technical vice president (1990 &1991), and the president of the IEEE-CPMT Society (1992 &1993). He was elected a member of the National Academy of Engineering in 2000.

Professor Y. C. Lee is a Professor of Mechanical Engineering. He was the Chair of ASME Electronic and Photonic Packaging Division (EPPD) from 2004 to 2005. From 1993 to 2002, he was an Associate Director of the Center for Advanced Manufacturing and Packaging of Microwave, Optical and Digital Electronics, University of Colorado at Boulder. Prior to joining the University in 1989, he was a Member of Technical Staff at AT&T Bell Laboratories, Murray Hill, New Jersey.  Dr. Lee was an Associated Editor of ASME Journal of Electronic Packaging from 2001 to 2004 and a Guest Editor for IEEE Transaction on Advanced Packaging in 2003 and 2005. He has received several awards: ASME Fellow, December 2002, Presidential Young Investigator (National Science Foundation, 1990), Outstanding Young Manufacturing Engineer Award (SME, 1992), Outstanding Paper Award (IEEE-ECTC, 1991), Outstanding Paper Award (ASME J. of Electronic Packaging, 1993), IEEE Transactions on Advanced Packaging Honorable Mention Paper Award, 2003

Von der hinteren Coverseite

Micro- and Opto-Electronic Materials and Structures: Physics, Mechanics, Design, Reliability, Packaging is the first comprehensive reference to collect and present the most, up-to-date, in-depth, practical and easy-to-use information on the physics, mechanics, reliability and packaging of micro- and opto-electronic materials, assemblies, structures and systems. The chapters in these two volumes contain summaries of the state-of-the-art and present new information on recently developed important methods or devices.   Furthermore,  practical recommendations are offered on how to successfully apply current knowledge and recently developed technology to design, manufacture and operate viable, reliable and cost-effective electronic components or photonic devices.  The emphasis is on the science and engineering of electronic and photonic packaging, on physical design problems, challenges and solutions.

Volume I focuses on physics and mechanics of micro- and opto-electronic structures and systems, i.e., on the science underpinnings of engineering methods and approaches used in microelectronics and photonics. Volume II deals with various practical aspects of reliability and packaging of micro- and opto-electronic systems. Internationally recognized experts and world leaders in particular areas of this branch of applied science and engineering contributed to the book.

Topics addressed in the book include, but are not limited to, the following:

physics and mechanics of polymer materials;

underfills;

electrically conductive adhesives;

plastic packages of IC devices;

flip-chip packages;

wirebond interconnects and metallurgical interconnections for harsh environments;

reliability and stress testing and accelerated life testing;

solder joint materials and technologies as well as  lead-free solder materials and joints;

reliability of mobile electronic products,  photonic materials, optical fibers and active and passive optical components;

thermal phenomena in micro- and opto-electronic systems and thermal stresses;

adhesion problems and solutions;

thin film materials, physics and mechanics;

photorefractive materials and devices;

nanomaterials and nanotechnology;  

multiphysics modeling and optimization technologies;

experimental methods and techniques; 

testing methods and techniques, subjected to thermal loading, stress analyses of processed silicon wafers, and many others.

The book is intended  as a reference source and as a manual for electrical, materials, mechanical, and reliability engineers, as well as applied physicists and materials scientists. The book will be an essential tool for all those who are involved or interested in state-of-the-art in the analysis, design and manufacturing of micro- and opto-electronic systems.