spacecraft systems engineering (43 Ergebnisse)

Paperback. Zustand: Very Good. The book has been read, but is in excellent condition. Pages are intact and not marred by notes or highlighting. The spine remains undamaged.

Zustand: good. Befriedigend/Good: Durchschnittlich erhaltenes Buch bzw. Schutzumschlag mit Gebrauchsspuren, aber vollständigen Seiten. / Describes the average WORN book or dust jacket that has all the pages present.

Zustand: Good. Good condition. A copy that has been read but remains intact. May contain markings such as bookplates, stamps, limited notes and highlighting, or a few light stains.

Taschenbuch. Zustand: Neu. Neuware - A systems engineering team used an innovative process to develop a new frictionless air bearing satellite simulator, SIMSAT II, for AFIT. AFIT faculty provided the design team with initial requirements, including rotating 30 rpm for spin stabilization and a rapid slewing capability about the yaw axis of +/- 45 degrees in 15 seconds from a standing start to a standing stop. The design team developed the Project Vee process model to meet these requirements by combining key system engineering principles of the original Vee model with project management tenets. The Project Vee model decomposed the requirements to produce a complete system design, guided the procurement of components, and performed validation and verification of the system. The design effort resulted in a three-axis, tabletop spherical air bearing configuration. SIMSAT II incorporates the use of fans as an actuating device for rapid slewing capability, a rigid structure for greater stability, and the capability for longer experimental runs. A modular payload platform allows for numerous types of experiments to be conducted onboard the system. SIMSAT II provides AFIT with a new simulator for spacecraft dynamics and control, with both educational and research experimentation possibilities.

paperback. Zustand: Good. Ex Library paperback, rebound in the style of a hardcover. No jacket. Good condition. Reprinted in 1994. Minor wear to the laminated hardcover. Stamps and light marks on the page block and one or two pages. Labels on the pastedowns; residue on spine foot and FEP; pen on copyright page. The binding is sound; all content is clear. CM. Used.

Paperback. Zustand: Good. No Jacket. Pages can have notes/highlighting. Spine may show signs of wear. ~ ThriftBooks: Read More, Spend Less 2.3.

Zustand: Good. This is an ex-library book and may have the usual library/used-book markings inside.This book has soft covers. In good all round condition. Please note the Image in this listing is a stock photo and may not match the covers of the actual item,1300grams, ISBN:9780471619512.

Hardcover. Zustand: Good. 4. It's a preowned item in good condition and includes all the pages. It may have some general signs of wear and tear, such as markings, highlighting, slight damage to the cover, minimal wear to the binding, etc., but they will not affect the overall reading experience.

Hardcover. Zustand: Very Good. 4. It's a well-cared-for item that has seen limited use. The item may show minor signs of wear. All the text is legible, with all pages included. It may have slight markings and/or highlighting.

Buch. Zustand: Neu. Neuware - A systems engineering team used an innovative process to develop a new frictionless air bearing satellite simulator, SIMSAT II, for AFIT. AFIT faculty provided the design team with initial requirements, including rotating 30 rpm for spin stabilization and a rapid slewing capability about the yaw axis of +/- 45 degrees in 15 seconds from a standing start to a standing stop. The design team developed the Project Vee process model to meet these requirements by combining key system engineering principles of the original Vee model with project management tenets. The Project Vee model decomposed the requirements to produce a complete system design, guided the procurement of components, and performed validation and verification of the system. The design effort resulted in a three-axis, tabletop spherical air bearing configuration. SIMSAT II incorporates the use of fans as an actuating device for rapid slewing capability, a rigid structure for greater stability, and the capability for longer experimental runs. A modular payload platform allows for numerous types of experiments to be conducted onboard the system. SIMSAT II provides AFIT with a new simulator for spacecraft dynamics and control, with both educational and research experimentation possibilities.

Zustand: New. This is a Brand-new US Edition. This Item may be shipped from US or any other country as we have multiple locations worldwide.

Zustand: New. pp. 266.

Paperback. Zustand: Very Good. No Jacket. May have limited writing in cover pages. Pages are unmarked. ~ ThriftBooks: Read More, Spend Less 2.5.

Zustand: gebraucht; sehr gut. textsauber und gepflegt.

Zustand: New. In.

Zustand: New. KlappentextrnrnA systems engineering team used an innovative process to develop a new frictionless air bearing satellite simulator, SIMSAT II, for AFIT. AFIT faculty provided the design team with initial requirements, including rotating 30 rpm f.

Zustand: NEW.

Zustand: New. Summing Up: Recommended. Upper-division undergraduates through professionals/practitioners. (Choice, 1 August 2012) I highly recommend the fantastic and landmark book Spacecraft Systems Engineering, Fourth Edition edited by Peter Fortescue, Graham Swiner.

HRD. Zustand: New. New Book. Shipped from UK. Established seller since 2000.

Softcover. Zustand: Gut. 3. Auflage. Peter Fortescue / John Stark / Graham Swinerd- Spacecraft Systems Engineering softcover, Wiley & Sons Ltd., 2003,3. Edition, noch guter Zustand, etwas bestoßen, Schnitt ein wenig unsauber, Dieses Buch befasst sich mit Raumfahrzeugsystemtechnik. u.a. : Design, Entwicklung, Antriebssysteme, Energieversorgung, Kommunikationssysteme, Steuersysteme. Gewicht : 1200 g.

Buch. Zustand: Neu. Neuware -This fourth edition of the bestselling Spacecraft Systems Engineering title provides the reader with comprehensive coverage of the design of spacecraft and the implementation of space missions, across a wide spectrum of space applications and space science. The text has been thoroughly revised and updated, with each chapter authored by a recognized expert in the field. Three chapters - Ground Segment, Product Assurance and Spacecraft System Engineering - have been rewritten, and the topic of Assembly, Integration and Verification has been introduced as a new chapter, filling a gap in previous editions.Libri GmbH, Europaallee 1, 36244 Bad Hersfeld 736 pp. Englisch.

Zustand: New. In.

Buch. Zustand: Neu. Neuware - This fourth edition of the bestselling Spacecraft Systems Engineering title provides the reader with comprehensive coverage of the design of spacecraft and the implementation of space missions, across a wide spectrum of space applications and space science. The text has been thoroughly revised and updated, with each chapter authored by a recognized expert in the field. Three chapters - Ground Segment, Product Assurance and Spacecraft System Engineering - have been rewritten, and the topic of Assembly, Integration and Verification has been introduced as a new chapter, filling a gap in previous editions.This edition addresses 'front-end system-level issues' such as environment, mission analysis and system engineering, but also progresses to a detailed examination of subsystem elements which represents the core of spacecraft design. This includes mechanical, electrical and thermal aspects, as well as propulsion and control. This quantitative treatment is supplemented by an emphasis on the interactions between elements, which deeply influences the process of spacecraft design.Adopted on courses worldwide, Spacecraft Systems Engineering is already widely respected by students, researchers and practising engineers in the space engineering sector. It provides a valuable resource for practitioners in a wide spectrum of disciplines, including system and subsystem engineers, spacecraft equipment designers, spacecraft operators, space scientists and those involved in related sectors such as space insurance.In summary, this is an outstanding resource for aerospace engineering students, and all those involved in the technical aspects of design and engineering in the space sector.

Zustand: Good. This is an ex-library book and may have the usual library/used-book markings inside.This book has soft covers. In good all round condition. Please note the Image in this listing is a stock photo and may not match the covers of the actual item,1250grams, ISBN:9780471619512.

Zustand: Good. This is an ex-library book and may have the usual library/used-book markings inside.This book has soft covers. In good all round condition. Please note the Image in this listing is a stock photo and may not match the covers of the actual item,1300grams, ISBN:9780471619512.

Taschenbuch. Zustand: Neu. Neuware - A systems engineering team used an innovative process to develop a new frictionless air bearing satellite simulator, SIMSAT II, for AFIT. AFIT faculty provided the design team with initial requirements, including rotating 30 rpm for spin stabilization and a rapid slewing capability about the yaw axis of +/- 45 degrees in 15 seconds from a standing start to a standing stop. The design team developed the Project Vee process model to meet these requirements by combining key system engineering principles of the original Vee model with project management tenets. The Project Vee model decomposed the requirements to produce a complete system design, guided the procurement of components, and performed validation and verification of the system. The design effort resulted in a three-axis, tabletop spherical air bearing configuration. SIMSAT II incorporates the use of fans as an actuating device for rapid slewing capability, a rigid structure for greater stability, and the capability for longer experimental runs. A modular payload platform allows for numerous types of experiments to be conducted onboard the system. SIMSAT II provides AFIT with a new simulator for spacecraft dynamics and control, with both educational and research experimentation possibilities.

Zustand: Poor. This is an ex-library book and may have the usual library/used-book markings inside.This book has soft covers. In poor condition, suitable as a reading copy. Please note the Image in this listing is a stock photo and may not match the covers of the actual item,1250grams, ISBN:9780471619512.

4th Ed. Royal 8vo. xxxii + 691pp. + [iii]. Numerous figures and tables. Very good in original white lettered black & brown coloured pictorial laminated boards. Additional postage may be necessary US$52.

Zustand: New. pp. 724.

Zustand: New. 2011. 4th Edition. Hardcover. This new edition covers all the different areas of engineering required in the design and implementation of spacecraft and space missions. Detailing recent developments in space activities, all chapters have been thoroughly revised and updated in the areas of launch vehicles, structures, ground stations and mechanisms. Editor(s): Fortescue, Peter; Swinerd, Graham; Stark, John. Series: Aerospace Series. Num Pages: 724 pages, Illustrations. BIC Classification: TRP; TTDS. Category: (P) Professional & Vocational. Dimension: 254 x 180 x 39. Weight in Grams: 1220. . . . . . Books ship from the US and Ireland.