Pvc handbook (29 Ergebnisse)

Hardcover. Zustand: Very Good. No Jacket. May have limited writing in cover pages. Pages are unmarked. ~ ThriftBooks: Read More, Spend Less.

Hardcover. Zustand: Good. No Jacket. Former library book; Pages can have notes/highlighting. Spine may show signs of wear. ~ ThriftBooks: Read More, Spend Less.

Hardcover. Zustand: Very Good. No Jacket. May have limited writing in cover pages. Pages are unmarked. ~ ThriftBooks: Read More, Spend Less.

Unknown. Zustand: Good. No Jacket. Pages can have notes/highlighting. Spine may show signs of wear. ~ ThriftBooks: Read More, Spend Less.

Unknown. Zustand: Very Good. No Jacket. May have limited writing in cover pages. Pages are unmarked. ~ ThriftBooks: Read More, Spend Less.

Unknown. Zustand: Fair. No Jacket. Readable copy. Pages may have considerable notes/highlighting. ~ ThriftBooks: Read More, Spend Less.

Binder. Zustand: Very Good-. No Jacket. 2nd Printing. 495 pages in very good condition. Pages are glossy, and filled with tables, graphs, and equations. Tabs stick out of the fore-edges to separate sections within the handbook. The book is bound in a dark blue three-ring binder, and the binder rings are slightly out of alignment with each other. The binder itself is stained and faded on the front, and smudged on the back. VG-/- - Size: 8 1/2 x 10. Book.…

Taschenbuch. Zustand: Neu. Neuware - A thermoplastic piping system is only as dependable as the chain of decisions behind it.Material selection, pressure rating, hydraulics, structural behavior, thermal movement, joining, installation, inspection, testing, and long-term asset decisions are tightly connected. A sound calculation can still lead to a weak conclusion if the field condition, joint quality, material data, or operating environment has not been verified.Thermoplastic Piping Systems Engineering Handbook brings those disciplines together in one practical, lifecycle-oriented reference. It follows the piping system from initial material selection and design through joining and installation, quality verification, in-service performance, failure investigation, and rehabilitation planning.Inside, readers can: - evaluate the engineering behavior and application fit of major thermoplastic pipe families;- work through pressure-rating, hydraulic-flow, surge, buried-pipe, support-spacing, and thermal-movement calculations;- understand heat-fusion, solvent-cement, and mechanical joining methods and the defects that can compromise them;- connect open-trench and trenchless installation practice with the design assumptions those methods must satisfy;- build stronger inspection, field-testing, traceability, qualification, and quality-assurance programs;- investigate crack growth, environmental stress cracking, chemical exposure, permeation, and other failure mechanisms;- apply condition assessment, risk prioritization, remaining-life thinking, and repair-or-rehabilitation decision frameworks to aging systems.Worked examples, case studies, common-pitfall discussions, and recurring documentation guidance turn the material into a problem-solving reference rather than a collection of isolated formulas. A central theme runs throughout: consequential engineering decisions should be supported by matched verification, using evidence sources whose blind spots do not simply repeat one another.The reference is equally useful as a sequential learning resource and as a targeted project lookup: readers can move directly to material selection, pressure design, surge, joining, installation, testing, chemical service, failure analysis, or asset management while still seeing how that question connects to the rest of the system.This handbook is written for practicing design and civil engineers, field and installation engineers, municipal and utility engineering staff, and asset-management professionals working with water, gas, sewer, drainage, and industrial process piping.For real projects, current standards, jurisdiction-specific requirements, certified material data, and qualified professional judgment remain essential. Use this handbook as the structured technical reference that helps you connect those requirements with the calculations, field practices, verification methods, and lifecycle questions that matter.…

Taschenbuch. Zustand: Neu. Neuware - A thermoplastic piping system is only as dependable as the chain of decisions behind it.Material selection, pressure rating, hydraulics, structural behavior, thermal movement, joining, installation, inspection, testing, and long-term asset decisions are tightly connected. A sound calculation can still lead to a weak conclusion if the field condition, joint quality, material data, or operating environment has not been verified.Thermoplastic Piping Systems Engineering Handbook brings those disciplines together in one practical, lifecycle-oriented reference. It follows the piping system from initial material selection and design through joining and installation, quality verification, in-service performance, failure investigation, and rehabilitation planning.Inside, readers can: - evaluate the engineering behavior and application fit of major thermoplastic pipe families;- work through pressure-rating, hydraulic-flow, surge, buried-pipe, support-spacing, and thermal-movement calculations;- understand heat-fusion, solvent-cement, and mechanical joining methods and the defects that can compromise them;- connect open-trench and trenchless installation practice with the design assumptions those methods must satisfy;- build stronger inspection, field-testing, traceability, qualification, and quality-assurance programs;- investigate crack growth, environmental stress cracking, chemical exposure, permeation, and other failure mechanisms;- apply condition assessment, risk prioritization, remaining-life thinking, and repair-or-rehabilitation decision frameworks to aging systems.Worked examples, case studies, common-pitfall discussions, and recurring documentation guidance turn the material into a problem-solving reference rather than a collection of isolated formulas. A central theme runs throughout: consequential engineering decisions should be supported by matched verification, using evidence sources whose blind spots do not simply repeat one another.The reference is equally useful as a sequential learning resource and as a targeted project lookup: readers can move directly to material selection, pressure design, surge, joining, installation, testing, chemical service, failure analysis, or asset management while still seeing how that question connects to the rest of the system.This handbook is written for practicing design and civil engineers, field and installation engineers, municipal and utility engineering staff, and asset-management professionals working with water, gas, sewer, drainage, and industrial process piping.For real projects, current standards, jurisdiction-specific requirements, certified material data, and qualified professional judgment remain essential. Use this handbook as the structured technical reference that helps you connect those requirements with the calculations, field practices, verification methods, and lifecycle questions that matter.…

HRD. Zustand: New. New Book. Shipped from UK. Established seller since 2000.

Zustand: New. In English.

Gebunden. Zustand: New. &Uumlber den AutorUni-Bell PVC Pipe Association (PVCPA) represents manufacturers of PVC pipe for water, sewer, irrigation and storm water applications. Their mission is to promote use of longer-life, lower-maintenance, corrosion-.

Hardcover. Zustand: Brand New. 5th revised edition edition. 600 pages. 10.00x8.25x1.50 inches. In Stock.

Taschenbuch. Zustand: Neu. Neuware - Every professional conduit installation begins long before the first bend-it begins with precision.Conduit bending is one of the most demanding skills in the electrical trade. A single inaccurate measurement or poorly planned layout can lead to wasted material, costly rework, and failed inspections. Whether you're installing EMT, fabricating rigid conduit, heat-bending PVC, or coordinating complex raceway systems, success depends on mastering both the mathematics and practical techniques behind every bend.Handbook of Conduit Bending and Fabrication is a comprehensive, field-focused reference designed for electricians, apprentices, contractors, maintenance technicians, and technical professionals. It combines trade mathematics, conduit fabrication, NEC-aware installation practices, and real-world jobsite techniques into one practical resource that progresses from foundational concepts to advanced conduit layout, fabrication, installation, and inspection readiness.Inside this handbook, you'll learn how to: - Master conduit bending fundamentals and raceway system design- Understand EMT, RMC, IMC, PVC, PVC-coated conduit, FMC, and LFMC applications- Select the right conduit materials, fittings, and support systems- Use hand, mechanical, electric, and hydraulic conduit benders correctly- Apply trade math, geometry, trigonometry, multipliers, deduct, gain, and shrink calculations with confidence- Fabricate precise stub-ups, offsets, rolling offsets, saddles, segment bends, concentric bends, and compound bends- Coordinate multi-conduit installations and conduit bank layouts- Cut, ream, thread, fabricate, and install rigid conduit and PVC systems- Calculate conduit fill, pull tension, support spacing, and code-conscious raceway layouts- Troubleshoot field problems, prepare for inspections, and use professional reference charts and worked examples to improve accuracy and productivityUnlike basic field guides that cover only a handful of bending techniques, this handbook provides a complete learning path that integrates theory, calculations, fabrication, installation, and practical jobsite application into a single professional reference. Every chapter is structured to help you build confidence while producing cleaner, more accurate, and inspection-ready conduit installations.Whether you're beginning your electrical career or refining years of field experience, this book will help you improve accuracy, reduce costly mistakes, and develop the skills to fabricate professional-quality conduit systems with confidence. Order your copy today and take your conduit bending expertise to the next level. …

Buch. Zustand: Neu. Neuware - There is a newer edition of this bestselling title.The collaborative result of thousands of hours of research and review, the contents of the 5thedition are numerically formatted by section and subsection, as well as by figure and table designation. This allows easy reference and quick access. TheHandbook of PVC Pipe Design and Constructionis a must-have reference for design engineers, public and private pipe utility managers, and students. A more complete text on PVC pipe is not available.The most thorough and far-reaching revision yet, the new 5thedition of theHandbook of PVC Pipe Design and Constructionis the most comprehensive and up-to-date reference on PVC pipe and fittings. It provides practical engineering and construction information, as well as recommendations applicable to the design and use of primarily underground PVC piping systems in both pressure and non-pressure applications. Previous editions have been used by engineers all across North America and around the globe in the utility and consulting engineering sectors, as well as in universities and technical institutions.FeaturesNew to the Fifth Edition- Four new chapters:- PVC Pressure Pipe Installation- PVC Non-Pressure Pipe Installation- Trenchless Installation of PVC Pipe- Molecularly Oriented Polyvinyl Chloride Pipe (PVCO)- Updated and improved graphs and tables- More open page format- Valuable updates.…

Zustand: as new. Wie neu/Like new.

hardcover. Zustand: Sehr gut. 749 Seiten; 9783446227149.2 Gewicht in Gramm: 3.

HRD. Zustand: New. New Book. Shipped from UK. Established seller since 2000.

Zustand: New.

Hardcover. Zustand: Brand New. 749 pages. 9.61x6.54x1.65 inches. In Stock.

Zustand: New.

Buch. Zustand: Neu. Neuware -In this single handbook, the editors aim to give a diverse audience of readers a complete account of all aspects of PVC - from monomer manufacture to polymerization; the gamut of such additives as stabilizers, lubricants, plasticizers, impact modifiers, fillers and reinforcing agents; blends and alloys; compounding and processing; characterization; combustion resistance and weatherability; product engineering design; applications; environmental and safety; and finally the PVC industry dynamics. The handbook contains both practical formulation information as well as a mechanistic view of why PVC behaves as it does. The 2nd edition is comprehensively updated throughout, with all-new chapters on PVC recycling, sustainability, and decarbonization.Hanser Fachbuchverlag, Kolberger Str. 22, 81679 München 950 pp. Englisch.…

Hardcover. Zustand: Brand New. 950 pages. 6.69x2.44x9.45 inches. In Stock.

Zustand: New. 2025. 2. hardcover. . . . . . Books ship from the US and Ireland.

Buch. Zustand: Neu. Neuware - In this single handbook, the editors aim to give a diverse audience of readers a complete account of all aspects of PVC - from monomer manufacture to polymerization; the gamut of such additives as stabilizers, lubricants, plasticizers, impact modifiers, fillers and reinforcing agents; blends and alloys; compounding and processing; characterization; combustion resistance and weatherability; product engineering design; applications; environmental and safety; and finally the PVC industry dynamics.The handbook contains both practical formulation information as well as a mechanistic view of why PVC behaves as it does. The 2nd edition is comprehensively updated throughout, with all-new chapters on PVC recycling, sustainability, and decarbonization. Contents: - Vinyl Chloride Monomer- Polymerization- PVC Stabilizers and Lubricants- Plasticizers- Processing Aids and Impact Modifiers- Fillers and Reinforcing Agents- PVC Blends and Alloys- Compounding Processes- Flexible PVC- Specialty Grade PVC Resins- Physical Properties and Characterization of PVC- Flammability and Fire Performance- Weathering of PVC Compounds- Fabrication Processes- Product Engineering Design- PVC Applications, their Standards and Regulations and Starting Formulations- PVC Environmental, Health, Safety- PVC Industry Structure and Dynamics- PVC Recycling- PVC Sustainability- PVC Decarbonization.…

Zustand: gut. 2025. PVC Handbook In englischer Sprache. pages.

Zustand: gut. 2005. PVC Handbook In deutscher Sprache. pages.

Buch. Zustand: Neu. Neuware -In this single handbook, the editors aim to give a diverse audience of readers a complete account of all aspects of PVC - from monomer manufacture to polymerization; the gamut of such additives as stabilizers, lubricants, plasticizers, impact modifiers, fillers and reinforcing agents; blends and alloys; compounding and processing; characterization; combustion resistance and weatherability; product engineering design; applications; environmental and safety; and finally the PVC industry dynamics. The handbook contains both practical formulation information as well as a mechanistic view of why PVC behaves as it does. The 2nd edition is comprehensively updated throughout, with all-new chapters on PVC recycling, sustainability, and decarbonization. 1198 pp. Englisch.…

Hardcover. Zustand: Very Good. No Jacket. 2nd Edition. 362 pages in very good condition. Pages are clean and unmarked with black and white illustrations throughout. Previous owner's marking and stamp on the ffep. A business card is pasted to the ffep. Bound in red cloth with gilt titles. 2nd edition. VG/- -. Book.…