Gesamtpreis (1 Artikel Artikel):
Versandziel:
process control modeling design (25 Ergebnisse)
Direkt zu den wichtigsten Suchergebnissen
Suchfilter
Produktart
- Alle Product Types
- Bücher (25)
- Magazine & Zeitschriften (Keine weiteren Ergebnisse entsprechen dieser Verfeinerung)
- Comics (Keine weiteren Ergebnisse entsprechen dieser Verfeinerung)
- Noten (Keine weiteren Ergebnisse entsprechen dieser Verfeinerung)
- Kunst, Grafik & Poster (Keine weiteren Ergebnisse entsprechen dieser Verfeinerung)
- Fotografien (Keine weiteren Ergebnisse entsprechen dieser Verfeinerung)
- Karten (Keine weiteren Ergebnisse entsprechen dieser Verfeinerung)
- Manuskripte & Papierantiquitäten (Keine weiteren Ergebnisse entsprechen dieser Verfeinerung)
Zustand Mehr dazu
- Neu (20)
- Wie Neu, Sehr Gut oder Gut Bis Sehr Gut (2)
- Gut oder Befriedigend (1)
- Ausreichend oder Schlecht (2)
- Wie beschrieben (Keine weiteren Ergebnisse entsprechen dieser Verfeinerung)
Einband
Weitere Eigenschaften
- Erstausgabe (Keine weiteren Ergebnisse entsprechen dieser Verfeinerung)
- Signiert (Keine weiteren Ergebnisse entsprechen dieser Verfeinerung)
- Schutzumschlag (Keine weiteren Ergebnisse entsprechen dieser Verfeinerung)
- Angebotsfoto (8)
Sprache (1)
Gratisversand
Land des Verkäufers
Verkäuferbewertung
-
Process Control: Modeling, Design and Simulation
Anbieter: World of Books (was SecondSale), Montgomery, IL, USA
Verkäuferbewertung 5 von 5 Sternen
Zustand: Very Good. Item in very good condition! Textbooks may not include supplemental items i.e. CDs, access codes etc.
-
Process Control Modeling Design and Simulation
Anbieter: World of Books (was SecondSale), Montgomery, IL, USA
Verkäuferbewertung 5 von 5 Sternen
Zustand: Acceptable. Item in acceptable condition! Textbooks may not include supplemental items i.e. CDs, access codes etc.
-
Process Control Modeling Design and Simulation
Anbieter: World of Books (was SecondSale), Montgomery, IL, USA
Verkäuferbewertung 5 von 5 Sternen
Zustand: Acceptable. Item in good condition. Textbooks may not include supplemental items i.e. CDs, access codes etc.
-
THICKNESS VARIATION REDUCTION FOR VARTM PROCESS: MODELING, DESIGN AND CONTROL
Anbieter: Ria Christie Collections, Uxbridge, Vereinigtes Königreich
Verkäuferbewertung 5 von 5 Sternen
EUR 55,71
EUR 13,84 Versand
Versand von Vereinigtes Königreich nach USAAnzahl: Mehr als 20 verfügbar
In den WarenkorbZustand: New. In.
-
PLASMA SPRAY PROCESS ADVANCED CONTROL SYSTEM DESIGN: EXPERIMENTAL AND MODELING ANALYSIS OF PLASMA SPRAY NONLINEARITIES
Anbieter: Ria Christie Collections, Uxbridge, Vereinigtes Königreich
Verkäuferbewertung 5 von 5 Sternen
EUR 75,00
EUR 13,84 Versand
Versand von Vereinigtes Königreich nach USAAnzahl: Mehr als 20 verfügbar
In den WarenkorbZustand: New. In.
-
Design, Modeling, Optimization and Control of Flotation Process
Anbieter: Ria Christie Collections, Uxbridge, Vereinigtes Königreich
Verkäuferbewertung 5 von 5 Sternen
EUR 75,15
EUR 13,84 Versand
Versand von Vereinigtes Königreich nach USAAnzahl: Mehr als 20 verfügbar
In den WarenkorbZustand: New. In.
-
Process Control: Modeling, Design, And Simulation
Anbieter: Romtrade Corp., STERLING HEIGHTS, MI, USA
Verkäuferbewertung 5 von 5 Sternen
Zustand: New. This is a Brand-new US Edition. This Item may be shipped from US or any other country as we have multiple locations worldwide.
-
Process Control for Sheet-Metal Stamping: Process Modeling, Controller Design and Shop-Floor Implementation (Advances in Industrial Control)
Buch 104 von 167: Advances in Industrial ControlAnbieter: Ria Christie Collections, Uxbridge, Vereinigtes Königreich
Verkäuferbewertung 5 von 5 Sternen
EUR 100,63
EUR 13,84 Versand
Versand von Vereinigtes Königreich nach USAAnzahl: Mehr als 20 verfügbar
In den WarenkorbZustand: New. In.
-
PROCESS CONTROL: MODELING, DESIGN, AND SIMULATION (INTERNATIONAL SERIES IN THE PHYSICAL AND CHEMICAL ENGINEERING SCIENCES)
Buch 19 von 21: International Series in the Physical and Chemical Engineering SciencesAnbieter: Romtrade Corp., STERLING HEIGHTS, MI, USA
Verkäuferbewertung 5 von 5 Sternen
Zustand: New. This is a Brand-new US Edition. This Item may be shipped from US or any other country as we have multiple locations worldwide.
-
Taschenbuch. Zustand: Neu. THICKNESS VARIATION REDUCTION FOR VARTM PROCESS | MODELING, DESIGN AND CONTROL | Jing Li | Taschenbuch | Einband - flex.(Paperback) | Englisch | 2009 | VDM Verlag Dr. Müller | EAN 9783639128710 | Verantwortliche Person für die EU: OmniScriptum GmbH & Co. KG, Bahnhofstr. 28, 66111 Saarbrücken, info[at]akademikerverlag[dot]de | Anbieter: preigu.
-
Process Control: Modeling, Design, and Simulation
Anbieter: Majestic Books, Hounslow, Vereinigtes Königreich
Verkäuferbewertung 4 von 5 Sternen
EUR 118,17
EUR 7,51 Versand
Versand von Vereinigtes Königreich nach USAAnzahl: 1 verfügbar
In den WarenkorbZustand: New.
-
Process Control for Sheet-Metal Stamping: Process Modeling, Controller Design and Shop-Floor Implementation (Advances in Industrial Control)
Buch 104 von 167: Advances in Industrial ControlAnbieter: Ria Christie Collections, Uxbridge, Vereinigtes Königreich
Verkäuferbewertung 5 von 5 Sternen
EUR 114,44
EUR 13,84 Versand
Versand von Vereinigtes Königreich nach USAAnzahl: Mehr als 20 verfügbar
In den WarenkorbZustand: New. In.
-
Modeling, Analysis, and Synthesis of Networked Cascade Control Systems | Design, Analysis, and Applications to Industrial Process Control
Sprache: Englisch
Verlag: LAP LAMBERT Academic Publishing, 2011
ISBN 10: 3844310525 ISBN 13: 9783844310528
Taschenbuch. Zustand: Neu. Modeling, Analysis, and Synthesis of Networked Cascade Control Systems | Design, Analysis, and Applications to Industrial Process Control | Congzhi Huang (u. a.) | Taschenbuch | 176 S. | Englisch | 2011 | LAP LAMBERT Academic Publishing | EAN 9783844310528 | Verantwortliche Person für die EU: preigu GmbH & Co. KG, Lengericher Landstr. 19, 49078 Osnabrück, mail[at]preigu[dot]de | Anbieter: preigu.
-
Taschenbuch. Zustand: Neu. PLASMA SPRAY PROCESS ADVANCED CONTROL SYSTEM DESIGN | EXPERIMENTAL AND MODELING ANALYSIS OF PLASMA SPRAY NONLINEARITIES | Chenhuan Cui | Taschenbuch | Kartoniert / Broschiert | Englisch | 2008 | VDM Verlag Dr. Müller | EAN 9783639110173 | Verantwortliche Person für die EU: OmniScriptum GmbH & Co. KG, Bahnhofstr. 28, 66111 Saarbrücken, info[at]akademikerverlag[dot]de | Anbieter: preigu.
-
Process Control for Sheet-metal Stamping: Process Modeling, Controller Design and Shop-floor Implementation
Buch 104 von 167: Advances in Industrial ControlAnbieter: Revaluation Books, Exeter, Vereinigtes Königreich
Verkäuferbewertung 5 von 5 Sternen
EUR 134,62
EUR 11,56 Versand
Versand von Vereinigtes Königreich nach USAAnzahl: 2 verfügbar
In den WarenkorbPaperback. Zustand: Brand New. reprint edition. 151 pages. 9.25x6.10x0.36 inches. In Stock.
-
Taschenbuch. Zustand: Neu. Process Control for Sheet-Metal Stamping | Process Modeling, Controller Design and Shop-Floor Implementation | Yongseob Lim (u. a.) | Taschenbuch | Advances in Industrial Control | xi | Englisch | 2016 | Springer | EAN 9781447170273 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu.
-
Process Control for Sheet-Metal Stamping: Process Modeling, Controller Design and Shop-Floor Implementation
Buch 104 von 167: Advances in Industrial ControlAnbieter: Revaluation Books, Exeter, Vereinigtes Königreich
Verkäuferbewertung 5 von 5 Sternen
EUR 149,75
EUR 11,56 Versand
Versand von Vereinigtes Königreich nach USAAnzahl: 2 verfügbar
In den WarenkorbHardcover. Zustand: Brand New. 2014 edition. 140 pages. 9.25x6.25x0.50 inches. In Stock.
-
Process Control: Modeling, Design, and Simulation (International Series in the Physical and Chemical Engineering Sciences)
Buch 19 von 21: International Series in the Physical and Chemical Engineering SciencesAnbieter: Ria Christie Collections, Uxbridge, Vereinigtes Königreich
Verkäuferbewertung 5 von 5 Sternen
EUR 149,58
EUR 13,84 Versand
Versand von Vereinigtes Königreich nach USAAnzahl: 2 verfügbar
In den WarenkorbZustand: New. In.
-
Modeling, Analysis, and Synthesis of Networked Cascade Control Systems : Design, Analysis, and Applications to Industrial Process Control
Sprache: Englisch
Verlag: LAP LAMBERT Academic Publishing, 2011
ISBN 10: 3844310525 ISBN 13: 9783844310528
Zustand: Sehr gut. Zustand: Sehr gut | Sprache: Englisch | Produktart: Bücher | Cascade control system, wherein the control loops are closed via real-time networks, is called networked cascade control system (NCCS for short). At present,the NCCS has found a large number of applications in practical industrial process, however, an intact theoretical system for the analysis and synthesis of it hasn''t been developed yet. The book mainly deals with the issues of modeling, stability and performance analysis, and controller design of NCCS.The designing and implementation of an NCCS pilot plant is also introduced.
-
Process Control for Sheet-Metal Stamping : Process Modeling, Controller Design and Shop-Floor Implementation
Buch 104 von 167: Advances in Industrial ControlSprache: Englisch
Verlag: Springer London, Springer London, 2016
ISBN 10: 144717027X ISBN 13: 9781447170273
Anbieter: AHA-BUCH GmbH, Einbeck, Deutschland
Verkäuferbewertung 5 von 5 Sternen
Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - Process Control for Sheet-Metal Stamping presents a comprehensive and structured approach to the design and implementation of controllers for the sheet metal stamping process. The use of process control for sheet-metal stamping greatly reduces defects in deep-drawn parts and can also yield large material savings from reduced scrap. Sheet-metal forming is a complex process and most often characterized by partial differential equations that are numerically solved using finite-element techniques. In this book, twenty years of academic research are reviewed and the resulting technology transitioned to the industrial environment. The sheet-metal stamping process is modeled in a manner suitable for multiple-input multiple-output control system design, with commercially available sensors and actuators. These models are then used to design adaptive controllers and real-time controller implementation is discussed. Finally, experimental results from actual shop floor deployment are presented along with ideas for further improvement of the technology. Process Control for Sheet-Metal Stamping allows the reader to design and implement process controllers in a typical manufacturing environment by retrofitting standard hydraulic or mechanical stamping presses and as such will be of interest to practising engineers working in metal-working, automotive and aeronautical industries. Academic researchers studying improvements in process control and how these affect the industries in which they are applied will also find the text of value.
-
Process Control for Sheet-Metal Stamping : Process Modeling, Controller Design and Shop-Floor Implementation
Buch 104 von 167: Advances in Industrial ControlSprache: Englisch
Verlag: Springer London, Springer, 2014
ISBN 10: 1447162838 ISBN 13: 9781447162834
Anbieter: AHA-BUCH GmbH, Einbeck, Deutschland
Verkäuferbewertung 5 von 5 Sternen
Buch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - Process Control for Sheet-Metal Stamping presents a comprehensive and structured approach to the design and implementation of controllers for the sheet metal stamping process. The use of process control for sheet-metal stamping greatly reduces defects in deep-drawn parts and can also yield large material savings from reduced scrap. Sheet-metal forming is a complex process and most often characterized by partial differential equations that are numerically solved using finite-element techniques. In this book, twenty years of academic research are reviewed and the resulting technology transitioned to the industrial environment. The sheet-metal stamping process is modeled in a manner suitable for multiple-input multiple-output control system design, with commercially available sensors and actuators. These models are then used to design adaptive controllers and real-time controller implementation is discussed. Finally, experimental results from actual shop floor deployment are presented along with ideas for further improvement of the technology. Process Control for Sheet-Metal Stamping allows the reader to design and implement process controllers in a typical manufacturing environment by retrofitting standard hydraulic or mechanical stamping presses and as such will be of interest to practising engineers working in metal-working, automotive and aeronautical industries. Academic researchers studying improvements in process control and how these affect the industries in which they are applied will also find the text of value.
-
Zustand: Sehr gut. Zustand: Sehr gut | Sprache: Englisch | Produktart: Bücher | Process Control for Sheet-Metal Stamping presents a comprehensive and structured approach to the design and implementation of controllers for the sheet metal stamping process. The use of process control for sheet-metal stamping greatly reduces defects in deep-drawn parts and can also yield large material savings from reduced scrap. Sheet-metal forming is a complex process and most often characterized by partial differential equations that are numerically solved using finite-element techniques. In this book, twenty years of academic research are reviewed and the resulting technology transitioned to the industrial environment. The sheet-metal stamping process is modeled in a manner suitable for multiple-input multiple-output control system design, with commercially available sensors and actuators. These models are then used to design adaptive controllers and real-time controller implementation is discussed. Finally, experimental results from actual shop floor deployment are presented along with ideas for further improvement of the technology. Process Control for Sheet-Metal Stamping allows the reader to design and implement process controllers in a typical manufacturing environment by retrofitting standard hydraulic or mechanical stamping presses and as such will be of interest to practising engineers working in metal-working, automotive and aeronautical industries. Academic researchers studying improvements in process control and how these affect the industries in which they are applied will also find the text of value.
-
Process Control: Modeling, Design, and Simulation (International Series in the Physical and Chemical Engineering Sciences)
Buch 19 von 21: International Series in the Physical and Chemical Engineering SciencesAnbieter: Revaluation Books, Exeter, Vereinigtes Königreich
Verkäuferbewertung 5 von 5 Sternen
EUR 179,29
EUR 17,33 Versand
Versand von Vereinigtes Königreich nach USAAnzahl: 2 verfügbar
In den WarenkorbPaperback. Zustand: Brand New. 2nd edition. 732 pages. 9.00x7.00x1.25 inches. In Stock.
-
Taschenbuch. Zustand: Neu. Process Control: Modeling, Design, and Simulation | B. Bequette (u. a.) | Taschenbuch | 768 S. | Englisch | 2023 | Pearson | EAN 9780134033754 | Verantwortliche Person für die EU: Pearson Studium im Verlag Pearson Benelux B.V. Zweigniederla, Sankt-Martin-Str. 82, 81541 München, buchhandel[at]pearson[dot]com | Anbieter: preigu.
-
Process Control : Modeling, Design and Simulation
Sprache: Englisch
Verlag: Pearson Education (US) Jan 2003, 2003
ISBN 10: 0133536408 ISBN 13: 9780133536409
Anbieter: AHA-BUCH GmbH, Einbeck, Deutschland
Verkäuferbewertung 5 von 5 Sternen
Buch. Zustand: Neu. Neuware - For junior or senior-level undergraduate Chemical Engineering courses in process dynamics and control, as well as a reference for professionals seeking the latest simulation tools and advanced control strategies.
