precision assembly technologies systems (22 Ergebnisse)

Zustand: New. In.

Zustand: New. In.

Hardcover. Zustand: Brand New. 2014 edition. 184 pages. 9.25x6.25x0.50 inches. In Stock.

Hardcover. Zustand: Brand New. 2012 edition. 212 pages. 9.00x6.25x0.55 inches. In Stock.

Paperback. Zustand: Brand New. 2012 edition. 224 pages. 9.25x6.10x0.60 inches. In Stock.

Paperback. Zustand: Brand New. rep rev edition. 184 pages. 9.25x6.10x0.42 inches. In Stock.

Buch. Zustand: Neu. Neuware -This book constitutes the refereed proceedings of the 6th IFIP WG 5.5 International Precision Assembly Seminar, IPAS 2012, held in Chamonix, France, in February 2012. The 15 revised full papers were carefully reviewed and selected from numerous submissions. The papers are organized into the following topical sections: micro processes and systems; handling and manipulation in assembly; tolerance management and error compensation methods; metrology and quality control; intelligent control of assembly systems; and process selection and modelling techniques.Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg 224 pp. Englisch.

Taschenbuch. Zustand: Neu. Neuware -This book constitutes the refereed post-proceedings of the 7th IFIP WG 5.5 International Precision Assembly Seminar, IPAS 2014, held in Chamonix, France, in February 2014. The 20 revised full papers were carefully reviewed and selected from numerous submissions. The papers cover the following topics: micro-assembly processes and systems ranging from desktop factory automation and packaging of MEMS to self-assembly processes and platforms; handling and manipulation, including flexible gripper systems, fixturing and high precision actuators; tolerance management and error-compensation techniques applied at different scales of precision assembly; metrology and quality control; intelligent assembly control; process selection, modelling and planning.Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg 184 pp. Englisch.

Buch. Zustand: Neu. Neuware -This book constitutes the refereed post-proceedings of the 7th IFIP WG 5.5 International Precision Assembly Seminar, IPAS 2014, held in Chamonix, France, in February 2014. The 20 revised full papers were carefully reviewed and selected from numerous submissions. The papers cover the following topics: micro-assembly processes and systems ranging from desktop factory automation and packaging of MEMS to self-assembly processes and platforms; handling and manipulation, including flexible gripper systems, fixturing and high precision actuators; tolerance management and error-compensation techniques applied at different scales of precision assembly; metrology and quality control; intelligent assembly control; process selection, modelling and planning.Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg 184 pp. Englisch.

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - This book constitutes the refereed post-proceedings of the 7th IFIP WG 5.5 International Precision Assembly Seminar, IPAS 2014, held in Chamonix, France, in February 2014. The 20 revised full papers were carefully reviewed and selected from numerous submissions. The papers cover the following topics: micro-assembly processes and systems ranging from desktop factory automation and packaging of MEMS to self-assembly processes and platforms; handling and manipulation, including flexible gripper systems, fixturing and high precision actuators; tolerance management and error-compensation techniques applied at different scales of precision assembly; metrology and quality control; intelligent assembly control; process selection, modelling and planning.

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - This book constitutes the refereed proceedings of the 6th IFIP WG 5.5 International Precision Assembly Seminar, IPAS 2012, held in Chamonix, France, in February 2012. The 15 revised full papers were carefully reviewed and selected from numerous submissions. The papers are organized into the following topical sections: micro processes and systems; handling and manipulation in assembly; tolerance management and error compensation methods; metrology and quality control; intelligent control of assembly systems; and process selection and modelling techniques.

Buch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - This book constitutes the refereed post-proceedings of the 7th IFIP WG 5.5 International Precision Assembly Seminar, IPAS 2014, held in Chamonix, France, in February 2014. The 20 revised full papers were carefully reviewed and selected from numerous submissions. The papers cover the following topics: micro-assembly processes and systems ranging from desktop factory automation and packaging of MEMS to self-assembly processes and platforms; handling and manipulation, including flexible gripper systems, fixturing and high precision actuators; tolerance management and error-compensation techniques applied at different scales of precision assembly; metrology and quality control; intelligent assembly control; process selection, modelling and planning.

Buch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - This book constitutes the refereed proceedings of the 6th IFIP WG 5.5 International Precision Assembly Seminar, IPAS 2012, held in Chamonix, France, in February 2012. The 15 revised full papers were carefully reviewed and selected from numerous submissions. The papers are organized into the following topical sections: micro processes and systems; handling and manipulation in assembly; tolerance management and error compensation methods; metrology and quality control; intelligent control of assembly systems; and process selection and modelling techniques.

Zustand: New. In.

Zustand: Hervorragend. Zustand: Hervorragend | Sprache: Englisch | Produktart: Bücher.

Zustand: New. In.

Buch. Zustand: Neu. Neuware -The development of new-generation micro-manufacturing technologies and systems has revolutionised the way products are designed and manufactured today with a s- nificant impact in a number of key industrial sectors. Micro-manufacturing techno- gies are often described as disruptive, enabling and interdisciplinary leading to the creation of whole new classes of products that were previously not feasible to ma- facture. While key processes for volume manufacture of micro-parts such as mach- ing and moulding are becoming mature technologies, micro-assembly remains a key challenge for the cost-effective manufacture of complex micro-products. The ability to manufacture customizable micro-products that can be delivered in variable volumes within relatively short timescales is very much dependent on the level of development of the micro-assembly processes, positioning, alignment and measurement techniques, gripping and feeding approaches and devices. Micro-assembly has developed rapidly over the last few years and all the pred- tions are that it will remain a critical technology for high-value products in a number of key sectors such as healthcare, communications, defence and aerospace. The key challenge is to match the significant technological developments with a new gene- tion of micro-products that will establish firmly micro-assembly as a mature manuf- turing process. th The book includes the set of papers presented at the 5 International Precision - sembly Seminar IPAS 2010 held in Chamonix, France from the 14th to the 17th February 2010.Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg 360 pp. Englisch.

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - The development of new-generation micro-manufacturing technologies and systems has revolutionised the way products are designed and manufactured today with a s- nificant impact in a number of key industrial sectors. Micro-manufacturing techno- gies are often described as disruptive, enabling and interdisciplinary leading to the creation of whole new classes of products that were previously not feasible to ma- facture. While key processes for volume manufacture of micro-parts such as mach- ing and moulding are becoming mature technologies, micro-assembly remains a key challenge for the cost-effective manufacture of complex micro-products. The ability to manufacture customizable micro-products that can be delivered in variable volumes within relatively short timescales is very much dependent on the level of development of the micro-assembly processes, positioning, alignment and measurement techniques, gripping and feeding approaches and devices. Micro-assembly has developed rapidly over the last few years and all the pred- tions are that it will remain a critical technology for high-value products in a number of key sectors such as healthcare, communications, defence and aerospace. The key challenge is to match the significant technological developments with a new gene- tion of micro-products that will establish firmly micro-assembly as a mature manuf- turing process. th The book includes the set of papers presented at the 5 International Precision - sembly Seminar IPAS 2010 held in Chamonix, France from the 14th to the 17th February 2010.

Buch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - The development of new-generation micro-manufacturing technologies and systems has revolutionised the way products are designed and manufactured today with a s- nificant impact in a number of key industrial sectors. Micro-manufacturing techno- gies are often described as disruptive, enabling and interdisciplinary leading to the creation of whole new classes of products that were previously not feasible to ma- facture. While key processes for volume manufacture of micro-parts such as mach- ing and moulding are becoming mature technologies, micro-assembly remains a key challenge for the cost-effective manufacture of complex micro-products. The ability to manufacture customizable micro-products that can be delivered in variable volumes within relatively short timescales is very much dependent on the level of development of the micro-assembly processes, positioning, alignment and measurement techniques, gripping and feeding approaches and devices. Micro-assembly has developed rapidly over the last few years and all the pred- tions are that it will remain a critical technology for high-value products in a number of key sectors such as healthcare, communications, defence and aerospace. The key challenge is to match the significant technological developments with a new gene- tion of micro-products that will establish firmly micro-assembly as a mature manuf- turing process. th The book includes the set of papers presented at the 5 International Precision - sembly Seminar IPAS 2010 held in Chamonix, France from the 14th to the 17th February 2010.

Paperback. Zustand: Brand New. 2010 edition. 357 pages. 9.25x6.10x0.82 inches. In Stock.

Hardcover. Zustand: Brand New. 1st edition. 344 pages. 9.25x6.25x1.00 inches. In Stock.

Zustand: Sehr gut. Zustand: Sehr gut | Sprache: Englisch | Produktart: Bücher.