Polymer colloids (58 Ergebnisse)

Zustand: Fair. This is an ex-library book and may have the usual library/used-book markings inside.This book has soft covers. Clean from markings. In fair condition, suitable as a study copy. Please note the Image in this listing is a stock photo and may not match the covers of the actual item,500grams, ISBN:0792306007.…

Paperback. Zustand: Very Good. The covers are a touch edgeworn. Small university stamp on the ffep. The growth of interest in the subject of Polymer Colloids over the last twenty five years or so has been very large resulting now in major international conferences on an annual basis and many national ones as well. The interest stems not only from the wide range of applications of these materials but also from a curiosity as to the mechanism of formation and their growing use as model particles to investigate fundamental aspects of physics and chemistry. In July 1988 a NATO Advanced Study Institute was held in Strasbourg, France, at the Centre St. Thomas. As an educational introduction to this I nstitute a series of eight lectures was given to cover the fundamental aspects of the subject. These eight lectures have now been compiled into an Introductory Text covering, emulsion poly merization, dispersion polymerization, inverse emulsion polymerization, the morphology of copolymer latices, the colloidal properties of latices, characterization methods and rheology. It is hoped that these will serve a wide audience, undergraduates, graduate-students and research workers, both in industry and academe. The chapters all contain review material up to date at the time of publication. fhe 1988 NATO Advanced Study I nstitute was made possible by a grant from the NATO-AS I programme and the following companies: BASF, Ludwigshafen, West Germany The Dow Chemical Company, Michigan, USA Dow Chemical Rheinwerk GmbH, Rheinmunster, West Germany ICI PLC, Runcorn, England S. C. Johnson and Son Inc., Racine, USA NORSOLOR, Verneuil en Halatte, France Rhone Poulenc, Aubervilliers, France. Size: 8vo - over 7¾" - 9¾" tall. Book.…

Paperback. x,228 pp.; 24x16 cm. Text in English. - (slightly discolored, previous owner's name and stamp) Although still (very) good, see picture 440g.

Hardcover. Zustand: Sehr gut. VIII, 224 S.; with fig., 29 cm, Very good. Shrink wrapped. Sprache: Englisch Gewicht in Gramm: 975.

Zustand: Very Good. 432 pp., hardcover, minor library markings else text clean & binding tight. - If you are reading this, this item is actually (physically) in our stock and ready for shipment once ordered. We are not bookjackers. Buyer is responsible for any additional duties, taxes, or fees required by recipient's country.…

Zustand: New. In.

Zustand: New. In.

Zustand: New. In.

Zustand: New. In.

Zustand: New. In.

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - Science and Technology of Polymer Colloids G.W. Poehlein, R.H. Ottewill, J.W. Goodwin (editors) Polymer colloids, more commonly known as latexes, are important in the manufacture of synthetic elastomers, commodity polymers, surface coatings, adhesive and numerous specialty products. The significant growth of the commercial production of polymer latexes during the past decade has been due to a number of factors. First, water-based systems, especially paints and coatings, avoid many of the environ mental problems associated with the solvent-based systems. Second, polymer colloid products can be custom designed to meet a wide range of application requirements. Third, large scale emulsion polymeri zation proceeds smoothly and controllably with a wide range of monomers to produce stable polymer colloids of high molecular weight. Polymer colloids are also important in functional scientific studies. This importance arises from the spherical shape of the particles, range of attainable particle diameters and the uniformity of their size distribution, and the possibility of controlling and character izing the particle surface. Polymer colloids are useful as size standards in microscopy and in instrument calibration, and as carriers in antibody-enzyme diagnostic tests. As suspensions of uniform spherical particles, they are ideal experimental systems to test the series of colloidal phenomena as stability and coagulation, electric kinetic or rheological proper ties, and light scattering. In recent years, polymer colloids have received attention as models for many-body molecular phenomena, including the order-disorder transitions and the mechanics of crystalline phases.…

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - Colloid Science is an ancient art. Unfortunately many scientists still regard it as such~ We hope that this book will dispel all such illusions by providing convincing evidence that a quiet renaissance has occurred. The New Colloid Science is based on rigorous, quantitative theory and works with extremely well de fined experimental systems. The former was first made possible by the advent of the Derjaguin-Landau-Verwey-Overbeek (DLVO) theory of the stability of lyophobic colloids in 1948. This is based on a consideration of the electrostatic interactions among colloidal par ticles bearing fixed charges in a medium containing moving counter ions. The Hamiltonian formulation of this model by Weiss, Mock, and Moon herein is a significant development in our theoretical pro gress. During about the same period we have advanced experimentally from poorly defined 'glue-like' systems to monodisperse colloids, synthesized for the first time in 1955 when J. W. Vanderhoff and E. B. Bradford announced their polystyrene colloids with extremely narrow particle size distributions. Vanderhoff and his coworkers have now set another milestone by fully characterizing the surfaces of these systems, as described in this monograph. The revolution is snowballing. Krieger and his coworkers have shown that the opalescent colors exhibited by 'deionized' monodis perse latexes are due to Bragg diffraction of these liquid-crystal systems, that they exhibit reversible 'melting' and that they may serve as macroscopic models for order-disorder phenomena.…

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - The growth of interest in the subject of Polymer Colloids over the last twenty five years or so has been very large resulting now in major international conferences on an annual basis and many national ones as well. The interest stems not only from the wide range of applications of these materials but also from a curiosity as to the mechanism of formation and their growing use as model particles to investigate fundamental aspects of physics and chemistry. In July 1988 a NATO Advanced Study Institute was held in Strasbourg, France, at the Centre St. Thomas. As an educational introduction to this I nstitute a series of eight lectures was given to cover the fundamental aspects of the subject. These eight lectures have now been compiled into an Introductory Text covering, emulsion poly merization, dispersion polymerization, inverse emulsion polymerization, the morphology of copolymer latices, the colloidal properties of latices, characterization methods and rheology. It is hoped that these will serve a wide audience, undergraduates, graduate-students and research workers, both in industry and academe. The chapters all contain review material up to date at the time of publication. fhe 1988 NATO Advanced Study I nstitute was made possible by a grant from the NATO-AS I programme and the following companies: BASF, Ludwigshafen, West Germany The Dow Chemical Company, Michigan, USA Dow Chemical Rheinwerk GmbH, Rheinmunster, West Germany ICI PLC, Runcorn, England S. C. Johnson and Son Inc., Racine, USA NORSOLOR, Verneuil en Halatte, France Rhone Poulenc, Aubervilliers, France.…

Hardcover. Zustand: New. A brand-new hard covered edition. Volume 135. Excellent and new! Just a slight bit of shelf wear to the covers. Book is new and a worthwhile addition for your library.

Zustand: New. Editor(s): Candau, Francoise; Ottewill, R. H. Num Pages: 228 pages, biography. BIC Classification: PNNP. Category: (P) Professional & Vocational; (UP) Postgraduate, Research & Scholarly. Dimension: 240 x 160 x 13. Weight in Grams: 435. . 1989. Softcover reprint of the original 1st ed. 1990. Paperback. . . . . Books ship from the US and Ireland. …

Paperback. Zustand: Brand New. reprint edition. 204 pages. 10.50x8.00x0.25 inches. In Stock.

Paperback. Zustand: Brand New. reprint edition. 380 pages. 9.25x6.10x1.10 inches. In Stock.

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - Future Directions In Polymer Colloids Hohamed S. EI-Aasser, and Robert H. Fitch (editors) It is appropriate that the first NATO-Advanced Research Workshop on 'FUTURE DIRECTIONS IN POLYMER COLLOIDS' was held approximately fifty years after the first synthetic polymer latexes were made on a commercial scale during the mid-1930s. Since that time the field of what is now known as polymer colloids has been evolving rapidly, not only on the practical level, but also on the scientific and engineering levels. Billions of pounds of copolymers are manufactured annually by means of the emulsion polymerization process. 'Commodity' polymers as well 'specialty' polymers are prepared today for use in a wide variety of applications: synthetic rubber, floor coatings, paints, adhesives, binders for non-woven fabrics, high-impact polymers latex foam, additives for construction materials such as cement and concrete, and rheological modifiers. They are also used in numerous biomedical applications: such as diagnostic tests, immunoassays, biological cell-labeling, (identi fication and separation), and drug delivery systems. Small quantities of monodisperse polymer colloids are used as size calibration standards and find extensive use as model colloids to test theories in colloids surface and rheological studies. Advances have been made in our understanding of the mechanism and kinetics of the emulsion polymerization process as well as the stability of polymer colloids. Equal advances were made in engineering areas related to polymer colloids, e. g. modeling of batch, semi-continuous and continuous emulsion polymerization and copolymer ization processes.…

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - Science and Technology of Polymer Colloids G. W. Poehlein, R. H. Ottewill, J. W. Goodwin (editors) Polymer colloids, more commonly known as latexes, are important in the manufacture of synthetic elastomers, commodity polymers, surface coatings, adhesive and numerous specialty products. The significant growth of the commercial production of polymer latexes during the past decade has been due to a number of factors. First, water-based systems, especially paints and coatings, avoid many of the environ mental problems associated with the solvent-based systems. Second, polymer colloid products can be custom designed to meet a wide range of application requirements. Third, large scale emulsion polymeri zation proceeds smoothly and controllably with a wide range of monomers to produce stable polymer colloids of high molecular weight Polymer colloids are also important in functional scientific studies This importance arises from the spherical shape of the particles, range of attainable particle diameters and the uniformity of their size distribution, and the possibility of controlling and character izing the particle surface. Polymer colloids are useful as size standards in microscopy and in instrument calibration, and as carriers in antibody-enzyme diagnosti, tests. As suspensions of uniform spherical particles, they are idea. experimental systems to test the series of colloidal phenomena as stability and coagulation, electric kinetic or rheological proper ties, and light scattering. In recent years, polymer colloids have received attention as models for many-body molecular phenomena, including the order-disorder transitions and the mechanics of crystalline phases.…

Paperback. Zustand: Brand New. reprint edition. 198 pages. 9.61x6.14x0.46 inches. In Stock.

Hardcover. Zustand: Gut. 402 Seiten Guter Zustand/ Good Ex-Library In englischer Sprache/ English. ha1047801 Sprache: Englisch Gewicht in Gramm: 750.

Zustand: New. In.

Zustand: New. In.

Zustand: New. In.

Zustand: New. In.

Zustand: New. In.

Buch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - Colloid-polymer mixtures are subject of intensive research due to their wide range of applicability, for instance in coatings and food-stuffs. This thesis constitutes a fundamental investigation towards a better control over the stability of such suspensions. Through the chapters, different key parameters governing the stability of colloid-polymer mixtures are explored. How the colloid (pigment) shape and the effective polymer-colloid affinity modulate the stability of the suspension are examples of these key parameters. Despise the mostly theoretical results presented, the thesis is written in a format accessible to a broad scientific audience. Some of the equations of state presented might of direct use to experimentalists. Furthermore, new theoretical insights about colloid-polymer mixtures are put forward. These include four-phase coexistences in effective two-component, quantification of depletant partitioning at high colloidal concentrations, multiple re-entrant phase behaviour of the colloidal fluid-solid coexistence, and a condition where polymers are neither depleted nor adsorbed from/to the colloidal surface.…

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - Colloid-polymer mixtures are subject of intensive research due to their wide range of applicability, for instance in coatings and food-stuffs. This thesis constitutes a fundamental investigation towards a better control over the stability of such suspensions. Through the chapters, different key parameters governing the stability of colloid-polymer mixtures are explored. How the colloid (pigment) shape and the effective polymer-colloid affinity modulate the stability of the suspension are examples of these key parameters. Despise the mostly theoretical results presented, the thesis is written in a format accessible to a broad scientific audience. Some of the equations of state presented might of direct use to experimentalists. Furthermore, new theoretical insights about colloid-polymer mixtures are put forward. These include four-phase coexistences in effective two-component, quantification of depletant partitioning at high colloidal concentrations, multiple re-entrant phase behaviour of the colloidal fluid-solid coexistence, and a condition where polymers are neither depleted nor adsorbed from/to the colloidal surface.…

hardcover. Zustand: Very Good. Most items will be dispatched the same or the next working day. A copy that has been read, but is in excellent condition. Pages are intact and not marred by notes or highlighting. The spine remains undamaged.

Paperback. Zustand: Brand New. 176 pages. 9.25x6.10x0.42 inches. In Stock.