Model based engineering embedded systems (27 Ergebnisse)
Model-Based Engineering of Embedded Real-Time Systems. International Dagstuhl Workshop, Dagstuhl Castle, Germany, November 4-9, 2007. Revised Selected Papers.
Giese, Holger/Karsai, Gabor/Lee, Edward A./Rumpe, Bernhard/Schätz, Bernhard (Hrsg.)
- Softcover
Anbieter: Universitätsbuchhandlung Herta Hold GmbH, Berlin, DeutschlandUniversitätsbuchhandlung Herta Hold GmbH
Verkäufer/-in kontaktierenVerkäufer/-in mit 4 SternenZustand: Gebraucht
EUR 15,00
EUR 30,00 VersandVersand von Deutschland nach USAAnzahl: 1 verfügbar
XV, 385 S. XV, 385 p. 94 illus. Softcover. Versand aus Deutschland / We dispatch from Germany via Air Mail. Einband bestoßen, daher Mängelexemplar gestempelt, sonst sehr guter Zustand. Imperfect copy due to slightly bumped cover, apart from this in very good condition. Stamped. (Programming and Software Engineering; Lecture Note…s in Computer Science). Sprache: Englisch.
- Softcover
Anbieter: Books From California, Simi Valley, CA, USABooks From California
Verkäufer/-in kontaktierenVerkäufer/-in mit 4 SternenZustand: Gebraucht - Befriedigend
EUR 42,36
EUR 4,38 VersandVersand innerhalb von USAAnzahl: 1 verfügbar
paperback. Zustand: Good. General shelf wear to cover/spine/binding. Pages are clean. Good reading copy. Manufacturer's error on cover.
- Softcover
Anbieter: Ria Christie Collections, Uxbridge, Vereinigtes KönigreichRia Christie Collections
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 48,46
EUR 13,90 VersandVersand von Vereinigtes Königreich nach USAAnzahl: Mehr als 20 verfügbar
Zustand: New. In.
Model-Based Engineering of Collaborative Embedded Systems: Extensions of the SPES Methodology [Hardcover] Böhm, Wolfgang; Broy, Manfred; Klein, Cornel; Pohl, Klaus; Rumpe, Bernhard and Schröck, Sebastian
Böhm, Wolfgang; Broy, Manfred; Klein, Cornel; Pohl, Klaus; Rumpe, Bernhard; Schröck, Sebastian
- Hardcover
- Erstausgabe
Anbieter: SpringBooks, Berlin, DeutschlandSpringBooks
Verkäufer/-in kontaktierenVerkäufer/-in mit 3 SternenZustand: Gebraucht - Wie neu
EUR 24,45
EUR 39,90 VersandVersand von Deutschland nach USAAnzahl: 1 verfügbar
Hardcover. Zustand: As New. 1. Auflage. from Germany, will be dispatched immediately.
- Softcover
Anbieter: Ria Christie Collections, Uxbridge, Vereinigtes KönigreichRia Christie Collections
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 56,33
EUR 13,90 VersandVersand von Vereinigtes Königreich nach USAAnzahl: Mehr als 20 verfügbar
Zustand: New. In.
- Softcover
Anbieter: Ria Christie Collections, Uxbridge, Vereinigtes KönigreichRia Christie Collections
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 60,69
EUR 13,90 VersandVersand von Vereinigtes Königreich nach USAAnzahl: Mehr als 20 verfügbar
Zustand: New. In.
- Softcover
Anbieter: Ria Christie Collections, Uxbridge, Vereinigtes KönigreichRia Christie Collections
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 60,69
EUR 13,90 VersandVersand von Vereinigtes Königreich nach USAAnzahl: Mehr als 20 verfügbar
Zustand: New. In.
Model-Based Engineering of Embedded Systems: The SPES 2020 Methodology
Pohl, Klaus (Editor) / Hönninger, Harald (Editor) / Achatz, Reinhold (Editor) / Broy, Manfred (Editor)
- Softcover
Anbieter: Revaluation Books, Exeter, Vereinigtes KönigreichRevaluation Books
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 80,82
EUR 11,60 VersandVersand von Vereinigtes Königreich nach USAAnzahl: 2 verfügbar
Paperback. Zustand: Brand New. 2012 edition. 316 pages. 9.30x6.20x1.97 inches. In Stock.
- Hardcover
Anbieter: Ria Christie Collections, Uxbridge, Vereinigtes KönigreichRia Christie Collections
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 79,04
EUR 13,90 VersandVersand von Vereinigtes Königreich nach USAAnzahl: Mehr als 20 verfügbar
Zustand: New. In.
- Softcover
Anbieter: Revaluation Books, Exeter, Vereinigtes KönigreichRevaluation Books
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 81,93
EUR 14,50 VersandVersand von Vereinigtes Königreich nach USAAnzahl: 2 verfügbar
Paperback. Zustand: Brand New. 385 pages. 9.20x6.10x0.90 inches. In Stock.
- Hardcover
Anbieter: Buchmarie, Darmstadt, DeutschlandBuchmarie
Verkäufer/-in kontaktierenVerkäufer/-in mit 4 SternenZustand: Gebraucht - Befriedigend
EUR 59,27
EUR 42,00 VersandVersand von Deutschland nach USAAnzahl: 1 verfügbar
Zustand: Good.
- Hardcover
Anbieter: Revaluation Books, Exeter, Vereinigtes KönigreichRevaluation Books
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 91,28
EUR 14,50 VersandVersand von Vereinigtes Königreich nach USAAnzahl: 2 verfügbar
Hardcover. Zustand: Brand New. 404 pages. 9.45x6.61x1.22 inches. In Stock.
- Softcover
Anbieter: moluna, Greven, Deutschlandmoluna
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 57,97
EUR 48,99 VersandVersand von Deutschland nach USAAnzahl: Mehr als 20 verfügbar
Einband - flex.(Paperback). Zustand: New.
- Softcover
Anbieter: AHA-BUCH GmbH, Einbeck, DeutschlandAHA-BUCH GmbH
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 47,95
EUR 61,15 VersandVersand von Deutschland nach USAAnzahl: 1 verfügbar
Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - Master's Thesis from the year 2014 in the subject Engineering - Mechanical Engineering, grade: 1.0, University of Applied Sciences Karlsruhe (Fakultät für Maschinenbau und Mechatronik), language: English, abstract: This master thesis investigates the… standard AUTOSAR ('AUTomotive Open System ARchitecture') within the ARTEMIS Joint Undertaking project CRYSTAL ('CRitical sYSTem engineering AcceLeration'), which is concerned with the development of interoperability-technology for System Engineering Environments. This work identifies a conflict between the application of the development-scheme 'AUTOSAR-Methodology' and the superior industrial trend of Model-based Software Engineering. Founded on specialized literature, the mentioned problem can be titled as 'Frontloading'. This methodological issue is such a fundamental aspect for the utilization of AUTOSAR that the present elaboration concentrates on it and refrains from interoperability-technology as focused by the paramount project. In the light of the motivation indicated in the acronym of CRYSTAL, clarifying this methodological aspect constitutes a fundamental contribution to efficiency in the engineering of Embedded Systems. This master thesis elucidates in detail the phenomenon 'Frontloading' and its symptoms in software-development with AUTOSAR. The elaboration is based on a rich automotive function-example, which is developed in accordance with the established paradigm of Model-based Software Engineering. Although AUTOSAR adheres to the latter, its application demands own specific procedures to produce automotive functions. This work finally delivers a concept for the efficient handling of AUTOSAR within Model-based Software Engineering with respect to Frontloading, associating requirements to corresponding development-artefacts.
- Softcover
Anbieter: moluna, Greven, Deutschlandmoluna
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 62,49
EUR 48,99 VersandVersand von Deutschland nach USAAnzahl: 2 verfügbar
Zustand: New.
Sprache: Englisch
Verlag: Springer International Publishing, Springer International Publishing 2018
- Softcover
Anbieter: AHA-BUCH GmbH, Einbeck, DeutschlandAHA-BUCH GmbH
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 53,49
EUR 62,67 VersandVersand von Deutschland nach USAAnzahl: 1 verfügbar
Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - This book provides a comprehensive introduction into the SPES XT modeling framework. Moreover, it shows the applicability of the framework for the development of embedded systems in different industry domains and reports on the lessons learned. It al…so describes how the SPES XT modeling framework can be tailored to meet domain and project-specific needs.The book is structured into four parts: Part I 'Starting Situation' discusses the status quo of the development of embedded systems with specific focus on model-based engineering and summarizes key challenges emerging from industrial practice.Part II 'Modeling Theory' introduces the SPES XT modeling framework and explains the core underlying principles. Part III 'Application of the SPES XT Framework' describes the application of the SPES XT modeling framework and how it addresses major industrial challenges. Part IV 'Evaluation and Technology Transfer' assess the impact of the SPES XT modeling framework and includes various exemplary applications from automation, automotive, and avionics. Overall, the SPES XT modeling framework offers a seamless model-based engineering approach. It addresses core challenges faced during the engineering of embedded systems. Among others, it offers aligned and integrated techniques for the early validation of engineering artefacts (including requirements and functional and technical designs), the management of product variants and their variability, modular safety assurance and deployment of embedded software.
- Softcover
Anbieter: AHA-BUCH GmbH, Einbeck, DeutschlandAHA-BUCH GmbH
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 53,49
EUR 62,67 VersandVersand von Deutschland nach USAAnzahl: 1 verfügbar
Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - Embedded systems have long become essential in application areas in which human control is impossible or infeasible. The development of modern embedded systems is becoming increasingly difficult and challenging because of their overall system complex…ity, their tighter and cross-functional integration, the increasing requirements concerning safety and real-time behavior, and the need to reduce development and operation costs.This book provides a comprehensive overview of the Software Platform Embedded Systems (SPES) modeling framework and demonstrates its applicability in embedded system development in various industry domains such as automation, automotive, avionics, energy, and healthcare. In SPES 2020, twenty-one partners from academia and industry have joined forces in order to develop and evaluate in different industrial domains a modeling framework that reflects the current state of the art in embedded systems engineering.The content of this book is structured in four parts. Part I 'Starting Point' discusses the status quo of embedded systems development and model-based engineering, and summarizes the key requirements faced when developing embedded systems in different application domains. Part II 'The SPES Modeling Framework' describes the SPES modeling framework. Part III 'Application and Evaluation of the SPES Modeling Framework' reports on the validation steps taken to ensure that the framework met the requirements discussed in Part I. Finally, Part IV 'Impact of the SPES Modeling Framework' summarizes the results achieved and provides an outlook on future work.The book is mainly aimed at professionals and practitioners who deal with the development of embedded systems on a daily basis. Researchers in academia and industry may use it as a compendium for the requirements and state-of-the-art solution concepts for embedded systems development.
- Softcover
Anbieter: preigu, Osnabrück, Deutschlandpreigu
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 47,95
EUR 70,00 VersandVersand von Deutschland nach USAAnzahl: 5 verfügbar
Taschenbuch. Zustand: Neu. Research on interoperability within development processes of Embedded Systems on an example | A concept for tackling Frontloading in Model-based Engineering with AUTOSAR | Ferdinand Schäfer | Taschenbuch | 152 S. | Englisch | 2015 | GRIN Verlag | EAN 9783656897972 | Verantwortliche Person für die EU: G…RIN Publishing GmbH, Waltherstr. 23, 80337 München, info[at]grin[dot]com | Anbieter: preigu.
- Hardcover
Anbieter: AHA-BUCH GmbH, Einbeck, DeutschlandAHA-BUCH GmbH
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 53,49
EUR 64,39 VersandVersand von Deutschland nach USAAnzahl: 1 verfügbar
Buch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - This Open Access book presents the results of the 'Collaborative Embedded Systems' (CrESt) project, aimed at adapting and complementing the methodology underlying modeling techniques developed to cope with the challenges of the dynamic structures of collabo…rative embedded systems (CESs) based on the SPES development methodology.In order to manage the high complexity of the individual systems and the dynamically formed interaction structures at runtime, advanced and powerful development methods are required that extend the current state of the art in the development of embedded systems and cyber-physical systems. The methodological contributions of the project support the effective and efficient development of CESs in dynamic and uncertain contexts, with special emphasis on the reliability and variability of individual systems and the creation of networks of such systems at runtime.The project was funded by the German Federal Ministry of Education and Research (BMBF), and the case studies are therefore selected from areas that are highly relevant for Germany's economy (automotive, industrial production, power generation, and robotics). It also supports the digitalization of complex and transformable industrial plants in the context of the German government's 'Industry 4.0' initiative, and the project results provide a solid foundation for implementing the German government's high-tech strategy 'Innovations for Germany' in the coming years.
Weitere Bilder- Softcover
Anbieter: preigu, Osnabrück, Deutschlandpreigu
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 50,35
EUR 70,00 VersandVersand von Deutschland nach USAAnzahl: 5 verfügbar
Taschenbuch. Zustand: Neu. Advanced Model-Based Engineering of Embedded Systems | Extensions of the SPES 2020 Methodology | Klaus Pohl (u. a.) | Taschenbuch | xii | Englisch | 2018 | Springer | EAN 9783319838762 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[a…t]springer[dot]com | Anbieter: preigu.
Weitere Bilder- Softcover
Anbieter: preigu, Osnabrück, Deutschlandpreigu
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 50,35
EUR 70,00 VersandVersand von Deutschland nach USAAnzahl: 5 verfügbar
Taschenbuch. Zustand: Neu. Model-Based Engineering of Embedded Systems | The SPES 2020 Methodology | Klaus Pohl (u. a.) | Taschenbuch | xii | Englisch | 2014 | Springer | EAN 9783642439926 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | An…bieter: preigu.
- Softcover
Anbieter: preigu, Osnabrück, Deutschlandpreigu
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 51,00
EUR 70,00 VersandVersand von Deutschland nach USAAnzahl: 5 verfügbar
Taschenbuch. Zustand: Neu. Model Driven Engineering for Safety Relevant Embedded Systems | Model Based Code Generation for Automation Systems | Wolfgang Roessler | Taschenbuch | Kartoniert / Broschiert | Englisch | 2013 | VDM Verlag Dr. Müller | EAN 9783836494151 | Verantwortliche Person für die EU: OmniScriptum GmbH & Co. KG, B…ahnhofstr. 28, 66111 Saarbrücken, info[at]akademikerverlag[dot]de | Anbieter: preigu.
- Softcover
Anbieter: preigu, Osnabrück, Deutschlandpreigu
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 51,00
EUR 70,00 VersandVersand von Deutschland nach USAAnzahl: 5 verfügbar
Taschenbuch. Zustand: Neu. Designing Software Engineering Model for Web Enabled Embedded Systems | Software Engieering, Embedded Systems, Model Based System Engineering | Ahmed I. Sharaf (u. a.) | Taschenbuch | 124 S. | Englisch | 2012 | LAP LAMBERT Academic Publishing | EAN 9783848417681 | Verantwortliche Person für die EU: BoD… - Books on Demand, In de Tarpen 42, 22848 Norderstedt, info[at]bod[dot]de | Anbieter: preigu.
Model-Based Engineering of Embedded Systems: The SPES 2020 Methodology
Pohl, Klaus (Editor)/ Honninger, Harald (Editor)/ Achatz, Reinhold (Editor)/ Broy, Manfred (Editor)
- Hardcover
Anbieter: Revaluation Books, Exeter, Vereinigtes KönigreichRevaluation Books
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 123,55
EUR 14,50 VersandVersand von Vereinigtes Königreich nach USAAnzahl: 2 verfügbar
Hardcover. Zustand: Brand New. 2012 edition. 313 pages. 9.75x7.00x1.00 inches. In Stock.
- Softcover
Anbieter: AHA-BUCH GmbH, Einbeck, DeutschlandAHA-BUCH GmbH
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 77,36
EUR 62,99 VersandVersand von Deutschland nach USAAnzahl: 2 verfügbar
Taschenbuch. Zustand: Neu. Neuware - Thetopicof'Model-BasedEngineeringofReal-TimeEmbeddedSystems'brings together a challenging problem domain (real-time embedded systems) and a - lution domain (model-based engineering). It is also at the forefrontof integrated software and systems engineering, as software in this problem domain…is an essential tool for system implementation and integration. Today, real-time - bedded software plays a crucial role in most advanced technical systems such as airplanes, mobile phones, and cars, and has become the main driver and - cilitator for innovation. Development, evolution, veri cation, con guration, and maintenance of embedded and distributed software nowadays are often serious challenges as drastic increases in complexity can be observed in practice. Model-based engineering in general, and model-based software development in particular, advocates the notion of using models throughout the development and life-cycle of an engineered system. Model-based software engineering re- forces this notion by promoting models not only as the tool of abstraction, but also as the tool for veri cation, implementation, testing, and maintenance. The application of such model-based engineering techniques to embedded real-time systems appears to be a good candidate to tackle some of the problems arising in the problem domain.
- Hardcover
Anbieter: AHA-BUCH GmbH, Einbeck, DeutschlandAHA-BUCH GmbH
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 80,24
EUR 63,55 VersandVersand von Deutschland nach USAAnzahl: 1 verfügbar
Buch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - Embedded systems have long become essential in application areas in which human control is impossible or infeasible. The development of modern embedded systems is becoming increasingly difficult and challenging because of their overall system complexity, th…eir tighter and cross-functional integration, the increasing requirements concerning safety and real-time behavior, and the need to reduce development and operation costs.This book provides a comprehensive overview of the Software Platform Embedded Systems (SPES) modeling framework and demonstrates its applicability in embedded system development in various industry domains such as automation, automotive, avionics, energy, and healthcare. In SPES 2020, twenty-one partners from academia and industry have joined forces in order to develop and evaluate in different industrial domains a modeling framework that reflects the current state of the art in embedded systems engineering.The content of this book is structured in four parts. Part I 'Starting Point' discusses the status quo of embedded systems development and model-based engineering, and summarizes the key requirements faced when developing embedded systems in different application domains. Part II 'The SPES Modeling Framework' describes the SPES modeling framework. Part III 'Application and Evaluation of the SPES Modeling Framework' reports on the validation steps taken to ensure that the framework met the requirements discussed in Part I. Finally, Part IV 'Impact of the SPES Modeling Framework' summarizes the results achieved and provides an outlook on future work.The book is mainly aimed at professionals and practitioners who deal with the development of embedded systems on a daily basis. Researchers in academia and industry may use it as a compendium for the requirements and state-of-the-art solution concepts for embedded systems development.
Sprache: Englisch
Verlag: Springer International Publishing, Springer International Publishing 2016
- Hardcover
Anbieter: AHA-BUCH GmbH, Einbeck, DeutschlandAHA-BUCH GmbH
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 80,24
EUR 63,55 VersandVersand von Deutschland nach USAAnzahl: 1 verfügbar
Buch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - This book provides a comprehensive introduction into the SPES XT modeling framework. Moreover, it shows the applicability of the framework for the development of embedded systems in different industry domains and reports on the lessons learned. It also desc…ribes how the SPES XT modeling framework can be tailored to meet domain and project-specific needs.The book is structured into four parts: Part I 'Starting Situation' discusses the status quo of the development of embedded systems with specific focus on model-based engineering and summarizes key challenges emerging from industrial practice.Part II 'Modeling Theory' introduces the SPES XT modeling framework and explains the core underlying principles. Part III 'Application of the SPES XT Framework' describes the application of the SPES XT modeling framework and how it addresses major industrial challenges. Part IV 'Evaluation and Technology Transfer' assess the impact of the SPES XT modeling framework and includes various exemplary applications from automation, automotive, and avionics. Overall, the SPES XT modeling framework offers a seamless model-based engineering approach. It addresses core challenges faced during the engineering of embedded systems. Among others, it offers aligned and integrated techniques for the early validation of engineering artefacts (including requirements and functional and technical designs), the management of product variants and their variability, modular safety assurance and deployment of embedded software.
