Microelectromechanical systems (121 Ergebnisse)

Hardback. Zustand: Good. A non-technical introduction to the field of microelectromechanical systems (MEMS). It describes in detail the materials used in producing MEMS - including silicon, polymers and glass and quartz substrates - as well as MEMS design for nozzles, sensors, valves and other applications. It examines the manufacture of commercial MEMS using technologies such as oxidation, lithography, chemical vapour deposition and silicon fusion bonding and applications in a wide range of industries including data storage, telecommunications, consumer, automotive, medical and defence. The book also addresses the future of MEMS - its potential for microelectrode arrays, actuators and optical switches and other technologies.…

Hardcover. Zustand: Very Good. No Jacket. May have limited writing in cover pages. Pages are unmarked. ~ ThriftBooks: Read More, Spend Less.

Hardcover. Zustand: Very Good. No Jacket. May have limited writing in cover pages. Pages are unmarked. ~ ThriftBooks: Read More, Spend Less.

Hardcover. Zustand: Good. No Jacket. Pages can have notes/highlighting. Spine may show signs of wear. ~ ThriftBooks: Read More, Spend Less.

Hardcover. Zustand: Very Good. No Jacket. May have limited writing in cover pages. Pages are unmarked. ~ ThriftBooks: Read More, Spend Less.

PAP. Zustand: New. New Book. Shipped from UK. Established seller since 2000.

PAP. Zustand: New. New Book. Shipped from UK. Established seller since 2000.

PAP. Zustand: New. New Book. Shipped from UK. Established seller since 2000.

PAP. Zustand: New. New Book. Shipped from UK. Established seller since 2000.

Hardcover. Zustand: As New. Originalverpackt. The application of microfluidics to biotechnology is an exciting new area that has already begun to revolutionize how researchers study and manipulate macromolecules, like DNA and proteins, and cells in vitro and within living organisms. Presenting an enlightening balance of numerical approaches, theory, and experimental examples, this cutting-edge resource offers keen insight into this burgeoning field. Supported with over 800 equations and more than 340 illustrations.…

Zustand: New. In English.

Zustand: New. In English.

Zustand: New. In English.

Zustand: New. In English.

Hardcover. Zustand: Fine. In fine unread condition.

HRD. Zustand: New. New Book. Shipped from UK. Established seller since 2000.

Hardcover/Pappeinband. Zustand: Wie neu. 234 pages. Like new. Shrink wrapped. / Wie neu. In Folie verschweißt. Sprache: Englisch Gewicht in Gramm: 530.

Zustand: Fair. This is an ex-library book and may have the usual library/used-book markings inside.This book has hardback covers. Clean from markings. In fair condition, suitable as a study copy. No dust jacket. Please note the Image in this listing is a stock photo and may not match the covers of the actual item,750grams, ISBN:9780849309168.…

HRD. Zustand: New. New Book. Shipped from UK. Established seller since 2000.

HRD. Zustand: New. New Book. Shipped from UK. Established seller since 2000.

Zustand: Good. Former library copy. Pages intact with minimal writing/highlighting. The binding may be loose and creased. Dust jackets/supplements are not included. Includes library markings. Stock photo provided. Product includes identifying sticker. Better World Books: Buy Books. Do Good.

HRD. Zustand: New. New Book. Shipped from UK. Established seller since 2000.

2005th ed. 16 x 24 cm. 416 pages. HC Versand aus Deutschland / We dispatch from Germany via Air Mail. Einband bestoßen, daher Mängelexemplar gestempelt, sonst sehr guter Zustand. Imperfect copy due to slightly bumped cover, apart from this in very good condition. Stamped. Sprache: Englisch.

Zustand: New. In English.

Zustand: New. In English.

Zustand: New. In English.

Zustand: New. pp. 480.

Taschenbuch. Zustand: Neu. Neuware - A munition's fuze is the most critical part of a weapon that must be highly reliable for providing a safe environment for those responsible for handling and transporting munitions. As these munitions are removed from war reserves for use in the battlefield, the number of unexploded ordinances has steadily risen. In addition to unreliability, fuze production has been impacted over the decades. The once robust fuze industry that prospered during the Cold War has dwindled down to a handful of manufacturers. In light of the problems associated with today's fuzes, AFIT has been proactive in designing a new microelectro-mechanical fuze system. AFIT has successfully shown proof-of-concept MEMS safe and arm (S and A) devices can be developed for future use with a MEMS fuze system. Although functional, AFIT's initial S and A device limits the size of fuze required. For this thesis, several new MEMS S and A devices were designed and tailored for much larger MEMS fuzes. Several types of MEMS actuators were considered for the actuation of the S and A device. The thermal actuator seemed the most logical choice for actuation. Unlike other types of MEMS actuators, the thermal actuator is highly regarded for generating high forces and deflection. In an attempt to design the optimal thermal actuator array for the S and A device, the single and double hot-arm thermal actuators were tested. These results were then used for designing three different MEMS S and A devices that varied in size for larger fuze systems. In this thesis, these three S and A devices will be discussed and their performance during test and validation will be shown.This work has been selected by scholars as being culturally important, and is part of the knowledge base of civilization as we know it. This work was reproduced from the original artifact, and remains as true to the original work as possible. Therefore, you will see the original copyright references, library stamps (as most of these works have been housed in our most important libraries around the world), and other notations in the work.This work is in the public domain in the United States of America, and possibly other nations. Within the United States, you may freely copy and distribute this work, as no entity (individual or corporate) has a copyright on the body of the work.As a reproduction of a historical artifact, this work may contain missing or blurred pages, poor pictures, errant marks, etc. Scholars believe, and we concur, that this work is important enough to be preserved, reproduced, and made generally available to the public. We appreciate your support of the preservation process, and thank you for being an important part of keeping this knowledge alive and relevant.…

Zustand: New.

Taschenbuch. Zustand: Neu. Neuware - Microelectromechanical systems (MEMS) radio frequency (RF) switches have been shown to have excellent electrical performance over a wide range of frequencies. However, cost-effective packaging techniques for MEMS switches do not currently exist. This thesis involves the design of RF-optimized encapsulations consisting of dielectric and metal layers, and the creation of a novel thin film encapsulation process to fabricate the encapsulations. The RF performance of several encapsulation designs are evaluated wit h an analytical model, full wave electromagnetic simulation, and laboratory testing. Performance degradation due to parasitic and reflection losses due to the package is considered, and RF feed-throughs of the transmission line into and out of the package are designed and assessed. Ten different encapsulation designs were created and their RF performance was characterized in terms of insertion loss, return loss, and isolation. A switch without an encapsulation and a switch with a dielectric encapsulation were fabricated and tested by the Air Force Research Laboratory (AFRL), and the test data was used to verify the data from analytical modeling and electromagnetic simulation performed in this work.This work has been selected by scholars as being culturally important, and is part of the knowledge base of civilization as we know it. This work was reproduced from the original artifact, and remains as true to the original work as possible. Therefore, you will see the original copyright references, library stamps (as most of these works have been housed in our most important libraries around the world), and other notations in the work.This work is in the public domain in the United States of America, and possibly other nations. Within the United States, you may freely copy and distribute this work, as no entity (individual or corporate) has a copyright on the body of the work.As a reproduction of a historical artifact, this work may contain missing or blurred pages, poor pictures, errant marks, etc. Scholars believe, and we concur, that this work is important enough to be preserved, reproduced, and made generally available to the public. We appreciate your support of the preservation process, and thank you for being an important part of keeping this knowledge alive and relevant.…