Gesamtpreis (1 Artikel Artikel):
Versandziel:
introduction mechatronics measurement systems von alciatore david (22 Ergebnisse)
Direkt zu den wichtigsten Suchergebnissen
Suchfilter
Produktart
- Alle Product Types
- Bücher (22)
- Magazine & Zeitschriften (Keine weiteren Ergebnisse entsprechen dieser Verfeinerung)
- Comics (Keine weiteren Ergebnisse entsprechen dieser Verfeinerung)
- Noten (Keine weiteren Ergebnisse entsprechen dieser Verfeinerung)
- Kunst, Grafik & Poster (Keine weiteren Ergebnisse entsprechen dieser Verfeinerung)
- Fotografien (Keine weiteren Ergebnisse entsprechen dieser Verfeinerung)
- Karten (Keine weiteren Ergebnisse entsprechen dieser Verfeinerung)
- Manuskripte & Papierantiquitäten (Keine weiteren Ergebnisse entsprechen dieser Verfeinerung)
Zustand Mehr dazu
- Neu (6)
- Wie Neu, Sehr Gut oder Gut Bis Sehr Gut (Keine weiteren Ergebnisse entsprechen dieser Verfeinerung)
- Gut oder Befriedigend (13)
- Ausreichend oder Schlecht (3)
- Wie beschrieben (Keine weiteren Ergebnisse entsprechen dieser Verfeinerung)
Weitere Eigenschaften
- Erstausgabe (Keine weiteren Ergebnisse entsprechen dieser Verfeinerung)
- Signiert (Keine weiteren Ergebnisse entsprechen dieser Verfeinerung)
- Schutzumschlag (Keine weiteren Ergebnisse entsprechen dieser Verfeinerung)
- Angebotsfoto (4)
Sprache (1)
Gratisversand
Land des Verkäufers
Verkäuferbewertung
-
Introduction to Mechatronics & Measurement Systems
Verlag: Mcgraw-Hill College (edition ), 1998
ISBN 10: 007029089X ISBN 13: 9780070290891
Sprache: Englisch
Hardcover. Zustand: Fair. The item might be beaten up but readable. May contain markings or highlighting, as well as stains, bent corners, or any other major defect, but the text is not obscured in any way.
-
Introduction to Mechatronics and Measurement Systems (SIE)
Anbieter: ThriftBooks-Dallas, Dallas, TX, USA
Verkäuferbewertung 5 von 5 Sternen
Paperback. Zustand: Very Good. No Jacket. May have limited writing in cover pages. Pages are unmarked. ~ ThriftBooks: Read More, Spend Less.
-
Introduction to Mechatronics & Measurement Systems
Verlag: McGraw-Hill Science/Engineering/Math (edition 2), 2002
ISBN 10: 0072402415 ISBN 13: 9780072402414
Sprache: Englisch
Hardcover. Zustand: Good. 2. It's a preowned item in good condition and includes all the pages. It may have some general signs of wear and tear, such as markings, highlighting, slight damage to the cover, minimal wear to the binding, etc., but they will not affect the overall reading experience.
-
Introduction to Mechatronics and Measurement Systems
Anbieter: Better World Books, Mishawaka, IN, USA
Verkäuferbewertung 5 von 5 Sternen
Zustand: Good. 2nd Edition. Used book that is in clean, average condition without any missing pages.
-
Introduction to Mechatronics and Measurement Systems
Anbieter: Better World Books: West, Reno, NV, USA
Verkäuferbewertung 5 von 5 Sternen
Zustand: Good. 2nd Edition. Used book that is in clean, average condition without any missing pages.
-
Introduction to Mechatronics & Measurement Systems
Verlag: McGraw-Hill Science/Engineering/Math, 2002
ISBN 10: 0072402415 ISBN 13: 9780072402414
Sprache: Englisch
Hardcover. Zustand: Good. No Jacket. Pages can have notes/highlighting. Spine may show signs of wear. ~ ThriftBooks: Read More, Spend Less.
-
Introduction to Mechatronics & Measurement Systems
Verlag: McGraw-Hill Science/Engineering/Math, 2002
ISBN 10: 0072402415 ISBN 13: 9780072402414
Sprache: Englisch
Anbieter: ThriftBooks-Atlanta, AUSTELL, GA, USA
Verkäuferbewertung 5 von 5 Sternen
Hardcover. Zustand: Good. No Jacket. Pages can have notes/highlighting. Spine may show signs of wear. ~ ThriftBooks: Read More, Spend Less.
-
Introduction to Mechatronics & Measurement Systems
Verlag: McGraw-Hill Science/Engineering/Math, 2002
ISBN 10: 0072402415 ISBN 13: 9780072402414
Sprache: Englisch
Anbieter: ThriftBooks-Dallas, Dallas, TX, USA
Verkäuferbewertung 5 von 5 Sternen
Hardcover. Zustand: Very Good. No Jacket. Missing dust jacket; May have limited writing in cover pages. Pages are unmarked. ~ ThriftBooks: Read More, Spend Less.
-
Introduction to Mechatronics & Measurement Systems
Verlag: McGraw-Hill Science/Engineering/Math, 2002
ISBN 10: 0072402415 ISBN 13: 9780072402414
Sprache: Englisch
Anbieter: ThriftBooks-Dallas, Dallas, TX, USA
Verkäuferbewertung 5 von 5 Sternen
Hardcover. Zustand: Good. No Jacket. Pages can have notes/highlighting. Spine may show signs of wear. ~ ThriftBooks: Read More, Spend Less.
-
Introduction to Mechatronics & Measurement Systems
Verlag: McGraw-Hill Science/Engineering/Math, 2002
ISBN 10: 0072402415 ISBN 13: 9780072402414
Sprache: Englisch
Anbieter: GridFreed, North Las Vegas, NV, USA
Verkäuferbewertung 5 von 5 Sternen
hardcover. Zustand: Good. Good with wear and markings. Looks like an interesting title.
-
Internationale AusgabeIntroduction to Mechatronics and Measurement Systems. David G. Alciatore, Michael B. Histand
Verlag: McGraw-Hill (edition International Version, Third Edition), 2006
ISBN 10: 0071254072 ISBN 13: 9780071254076
Sprache: Englisch
Paperback. Zustand: Fair. International Version, Third Edition. The item might be beaten up but readable. May contain markings or highlighting, as well as stains, bent corners, or any other major defect, but the text is not obscured in any way. International edition.
-
ISE Introduction to Mechatronics and Measurement Systems
Anbieter: PBShop.store UK, Fairford, GLOS, Vereinigtes Königreich
Verkäuferbewertung 5 von 5 Sternen
EUR 68,38
EUR 6,66 für den Versand von Vereinigtes Königreich nach USAAnzahl: 15 verfügbar
In den WarenkorbPAP. Zustand: New. New Book. Shipped from UK. Established seller since 2000.
-
Introduction to Mechatronics and Measurement Systems
Anbieter: Anybook.com, Lincoln, Vereinigtes Königreich
Verkäuferbewertung 5 von 5 Sternen
EUR 66,01
EUR 14,69 für den Versand von Vereinigtes Königreich nach USAAnzahl: 1 verfügbar
In den WarenkorbZustand: Good. This is an ex-library book and may have the usual library/used-book markings inside.This book has soft covers. In good all round condition. Library sticker on front cover. Please note the Image in this listing is a stock photo and may not match the covers of the actual item,1000grams, ISBN:9780071086042.
-
Introduction to Mechatronics and Measurement Systems
Anbieter: Anybook.com, Lincoln, Vereinigtes Königreich
Verkäuferbewertung 5 von 5 Sternen
EUR 66,01
EUR 14,69 für den Versand von Vereinigtes Königreich nach USAAnzahl: 1 verfügbar
In den WarenkorbZustand: Good. This is an ex-library book and may have the usual library/used-book markings inside.This book has soft covers. In good all round condition. Library sticker on front cover. Please note the Image in this listing is a stock photo and may not match the covers of the actual item,950grams, ISBN:9780071086042.
-
Introduction to Mechatronics and Measurement Systems
Anbieter: Anybook.com, Lincoln, Vereinigtes Königreich
Verkäuferbewertung 5 von 5 Sternen
EUR 66,01
EUR 14,69 für den Versand von Vereinigtes Königreich nach USAAnzahl: 1 verfügbar
In den WarenkorbZustand: Good. This is an ex-library book and may have the usual library/used-book markings inside.This book has soft covers. In good all round condition. Library sticker on front cover. Please note the Image in this listing is a stock photo and may not match the covers of the actual item,1000grams, ISBN:9780071086042.
-
Introduction to Mechatronics and Measurement Systems
Anbieter: Goodwill Industries of VSB, Oxnard, CA, USA
Verkäuferbewertung 5 von 5 Sternen
Zustand: Acceptable. The book is 100% readable but visibly worn, and damaged. This may include stains, tears, rips, folded pages, binding damage, dents, scuffs, scratches and sticker residue. The book also may contain heavy highlighting and notes. Please ask for photos as our books are donations and may not contain above mentioned defects.
-
INTRODUCTION TO MECHATRONICS AND MEASUREMENT SYSTEMS
Anbieter: Kennys Bookstore, Olney, MD, USA
Verkäuferbewertung 5 von 5 Sternen
Zustand: New. 2018. 5th Edition. Paperback. . . . . . Books ship from the US and Ireland.
-
Introduction to Mechatronics and Measurement Systems
Anbieter: Anybook.com, Lincoln, Vereinigtes Königreich
Verkäuferbewertung 5 von 5 Sternen
EUR 84,84
EUR 28,43 für den Versand von Vereinigtes Königreich nach USAAnzahl: 1 verfügbar
In den WarenkorbZustand: Good. This is an ex-library book and may have the usual library/used-book markings inside.This book has soft covers. In good all round condition. Please note the Image in this listing is a stock photo and may not match the covers of the actual item,900grams, ISBN:9780071086042.
-
Kartoniert / Broschiert. Zustand: New. InhaltsverzeichnisrnrnnLists Class Discussion Items Examples Design Examples Threaded Design Examples Preface Chapter 1Introduction 1.1 Mechatronics 1.2 Measurement Systems 1.3 Threaded Design Exam.
-
ISE Introduction to Mechatronics and Measurement Systems
Verlag: Mcgraw-Hill Education Mai 2018, 2018
ISBN 10: 1260085198 ISBN 13: 9781260085198
Sprache: Englisch
Anbieter: AHA-BUCH GmbH, Einbeck, Deutschland
Verkäuferbewertung 5 von 5 Sternen
Taschenbuch. Zustand: Neu. Neuware - Introduction to Mechatronics and Measurement Systems, Fifth Edition, provides comprehensive and accessible coverage of the field of mechatronics for mechanical, electrical and aerospace engineering majors. The author presents a concise review of electrical circuits, solid-state devices, digital circuits, and motors- all of which are fundamental to understanding mechatronic systems.Mechatronics design considerations are presented throughout the text, and in 'Design Example' features. The text's numerous illustrations, examples, class discussion items, and chapter questions & exercises provide an opportunity to understand and apply mechatronics concepts to actual problems encountered in engineering practice. This text has been tested over several years to ensure accuracy.Introduction to Mechatronics and Measurement Systems, Fifth Edition - is a multifaceted resource which is designed to serve as a text for modern instrumentation and measurements courses, hybrid electrical and mechanical engineering courses replacing traditional circuits and instrumentation courses, as well as for stand-alone mechatronics courses, or the first course in a mechatronics sequence. It can also work for hybrid courses, providing an opportunity to reduce the number of credit hours in a typical mechanical engineering curriculum. Written by the academic award winning author and mechanical engineering professor, Dr. David G. Alciatore.The author's webpage (linked to from OLC) has additional computer files and resources, including MATLAB examples, videos demonstrations, and lab exercises.
-
Taschenbuch. Zustand: Neu. ISE Introduction to Mechatronics and Measurement Systems | David Alciatore | Taschenbuch | Kartoniert / Broschiert | Englisch | 2018 | McGraw-Hill Education | EAN 9781260085198 | Verantwortliche Person für die EU: Libri GmbH, Europaallee 1, 36244 Bad Hersfeld, gpsr[at]libri[dot]de | Anbieter: preigu.
-
EUR 179,48
EUR 48,99 für den Versand von Deutschland nach USAAnzahl: Mehr als 20 verfügbar
In den WarenkorbZustand: New. KlappentextIntroduction to Mechatronics and Measurement Systems, Fifth Edition, provides comprehensive and accessible coverage of the field of mechatronics for mechanical, electrical and aerospace engineering majors. The author presents .
