Integration theory applications applied (16 Ergebnisse)

Zustand: Good. 392 pp., Hardcover, ex library, else text clean and binding tight. - If you are reading this, this item is actually (physically) in our stock and ready for shipment once ordered. We are not bookjackers. Buyer is responsible for any additional duties, taxes, or fees required by recipient's country.…

Zustand: Good. 340 pp., hardcover, ex library, else text and binding still clean tight and bright. - If you are reading this, this item is actually (physically) in our stock and ready for shipment once ordered. We are not bookjackers. Buyer is responsible for any additional duties, taxes, or fees required by recipient's country. Photos available upon request.…

Zustand: Sehr gut. Zustand: Sehr gut | Seiten: 392 | Sprache: Englisch | Produktart: Bücher | In collaboration with the Contact Group Experimental Mechanics in The Netherlands and under the auspices of the Technological Institute of the Koninklijke Vlaamse Ingenieurs Vereniging (Royal Flemish Society of Engineers), the Department of Ap­ plied Mechanics of the Koninklijk Instituut van Ingenieurs (Royal Institution of Engineers in The Netherlands) organised the second National Mechanics Congress in The Netherlands, on November 16-18, 1992. About hundred participants from universities and industrial research laboratories in The Netherlands and Belgium discussed topics around the theme: Building Bridges, Integration of Theory and Applications in Applied Mechanics. Building bridges is of course one of the main tasks of a civil engineer, in order to improve the infrastructure of our society. Strength, stiffness and stability have to be guaranteed for a large number of years of service. Localised effects such as shear lag in longitudinal stiffeners, small cracks in concrete structures and effects of corrosion may on the long tenn lead to catastrofic failure of bridges. During the congress J.P. Gailliez presented a talk about the hydraulic ship lifts in the Canal du Centre in south Belgium. Built more than a hundred years ago, the elevators still are in a perfect condition and are recognized now as an industrial archeological monument.…

Zustand: New. In English.

Zustand: New. In English.

Taschenbuch. Zustand: Neu. Integration of Theory and Applications in Applied Mechanics | Choice of papers presented at the First National Mechanics Congress, April 2-4, 1990, Rolduc, Kerkrade, The Netherlands | J. F. Dijksman (u. a.) | Taschenbuch | xii | Englisch | 2011 | Springer | EAN 9789401074568 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu.…

Buch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - The Department of Applied Mechanics of the Royal Institution of Engineers in the Netherlands (Koninklijk Instituut van Ingenieurs) organised on April 2-4, 1990 the first National Applied Mechanics Congress about the theme: 'Integration of Theory and Applications in Applied Mechanics' The idea behind this initiative was to bring together the Applied Mechanics communities in The Netherlands and Belgium and to create an environment in which new developments in the field could be discussed and in which connections to other disciplines could be established. Among an extensive list of possible subjects the following were selected as congress topics: - non-linear material behaviour, - chaos, - mechatronics, - liquid-solid interactions, - mathematics and applied mechanics, - integration of Applied Mechanics and other disciplines. Applied Mechanics comprises both solid mechanics and fluid mechanics. These can be subdivided further into: rheology, plasticity, theory of plates and shells, theory of elasticity, multibody dynamics, dynamics of continuous media, stability of the elastic equilibrium, etc. Applied Mechanics is of tremendous practical significance and it proves its value almost daily in applications such as the calculation of the strength and stiffness of constructions, like e. g. …

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - The Department of Applied Mechanics of the Royal Institution of Engineers in the Netherlands (Koninklijk Instituut van Ingenieurs) organised on April 2-4, 1990 the first National Applied Mechanics Congress about the theme: 'Integration of Theory and Applications in Applied Mechanics' The idea behind this initiative was to bring together the Applied Mechanics communities in The Netherlands and Belgium and to create an environment in which new developments in the field could be discussed and in which connections to other disciplines could be established. Among an extensive list of possible subjects the following were selected as congress topics: - non-linear material behaviour, - chaos, - mechatronics, - liquid-solid interactions, - mathematics and applied mechanics, - integration of Applied Mechanics and other disciplines. Applied Mechanics comprises both solid mechanics and fluid mechanics. These can be subdivided further into: rheology, plasticity, theory of plates and shells, theory of elasticity, multibody dynamics, dynamics of continuous media, stability of the elastic equilibrium, etc. Applied Mechanics is of tremendous practical significance and it proves its value almost daily in applications such as the calculation of the strength and stiffness of constructions, like e. g.…

Paperback. Zustand: Brand New. 356 pages. 9.25x6.10x0.81 inches. In Stock.

Taschenbuch. Zustand: Neu. Topics in Applied Mechanics | Integration of Theory and Applications in Applied Mechanics | J. F. Dijksman (u. a.) | Taschenbuch | XIII | Englisch | 2012 | Springer | EAN 9789401049269 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu.…

Zustand: New. In English.

Zustand: New. In English.

Zustand: New. Editor(s): Dijksman, J.F.; Nieuwstadt, F. T. M. Num Pages: 354 pages, biography. BIC Classification: TGB. Category: (P) Professional & Vocational; (UP) Postgraduate, Research & Scholarly. Dimension: 297 x 210 x 20. Weight in Grams: 675. . 1990. Hardback. . . . . Books ship from the US and Ireland.…

Buch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - In collaboration with the Contact Group Experimental Mechanics in The Netherlands and under the auspices of the Technological Institute of the Koninklijke Vlaamse Ingenieurs Vereniging (Royal Flemish Society of Engineers), the Department of Ap plied Mechanics of the Koninklijk Instituut van Ingenieurs (Royal Institution of Engineers in The Netherlands) organised the second National Mechanics Congress in The Netherlands, on November 16-18, 1992. About hundred participants from universities and industrial research laboratories in The Netherlands and Belgium discussed topics around the theme: Building Bridges, Integration of Theory and Applications in Applied Mechanics. Building bridges is of course one of the main tasks of a civil engineer, in order to improve the infrastructure of our society. Strength, stiffness and stability have to be guaranteed for a large number of years of service. Localised effects such as shear lag in longitudinal stiffeners, small cracks in concrete structures and effects of corrosion may on the long tenn lead to catastrofic failure of bridges. During the congress J.P. Gailliez presented a talk about the hydraulic ship lifts in the Canal du Centre in south Belgium. Built more than a hundred years ago, the elevators still are in a perfect condition and are recognized now as an industrial archeological monument.…

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - In collaboration with the Contact Group Experimental Mechanics in The Netherlands and under the auspices of the Technological Institute of the Koninklijke Vlaamse Ingenieurs Vereniging (Royal Flemish Society of Engineers), the Department of Ap plied Mechanics of the Koninklijk Instituut van Ingenieurs (Royal Institution of Engineers in The Netherlands) organised the second National Mechanics Congress in The Netherlands, on November 16-18, 1992. About hundred participants from universities and industrial research laboratories in The Netherlands and Belgium discussed topics around the theme: Building Bridges, Integration of Theory and Applications in Applied Mechanics. Building bridges is of course one of the main tasks of a civil engineer, in order to improve the infrastructure of our society. Strength, stiffness and stability have to be guaranteed for a large number of years of service. Localised effects such as shear lag in longitudinal stiffeners, small cracks in concrete structures and effects of corrosion may on the long tenn lead to catastrofic failure of bridges. During the congress J.P. Gailliez presented a talk about the hydraulic ship lifts in the Canal du Centre in south Belgium. Built more than a hundred years ago, the elevators still are in a perfect condition and are recognized now as an industrial archeological monument.…

Paperback. Zustand: Brand New. reprint edition. 392 pages. 9.45x6.30x0.89 inches. In Stock.