Engineering maintainability (59 Ergebnisse)

Hardcover. Zustand: Very Good. 1. With dust jacket. It's a well-cared-for item that has seen limited use. The item may show minor signs of wear. All the text is legible, with all pages included. It may have slight markings and/or highlighting.

Hardback. Zustand: Very Good. The book has been read, but is in excellent condition. Pages are intact and not marred by notes or highlighting. The spine remains undamaged.

Paperback. Zustand: Fair. The item might be beaten up but readable. May contain markings or highlighting, as well as stains, bent corners, or any other major defect, but the text is not obscured in any way.

Paperback. Zustand: As New. No Jacket. Pages are clean and are not marred by notes or folds of any kind. ~ ThriftBooks: Read More, Spend Less.

Unknown. Zustand: Good. No Jacket. Former library book; Missing dust jacket; Pages can have notes/highlighting. Spine may show signs of wear. ~ ThriftBooks: Read More, Spend Less.

Hardcover. Zustand: As New. No Jacket. Pages are clean and are not marred by notes or folds of any kind. ~ ThriftBooks: Read More, Spend Less.

Hardcover. Zustand: As New. No Jacket. Pages are clean and are not marred by notes or folds of any kind. ~ ThriftBooks: Read More, Spend Less.

Hardcover. Zustand: Very Good. No Jacket. May have limited writing in cover pages. Pages are unmarked. ~ ThriftBooks: Read More, Spend Less.

Soft cover. Zustand: Very Good Plus. Thick volume published Oct., 1972, with tables, diagrams, many illustrations. Deals with weapon and missile systems. and technical maintenance issues. Small crease along right lower side of front cover, else in excellent condition. Three hole punches for placement in binder.…

Hardcover. Zustand: Very Good. Zustand des Schutzumschlags: N/A. 1st Edition. 112pp. Laminated pictorial paper-covered boards. 8vo. Lightly bumped spine ends. Text block edges and endpapers just starting to tan. Internally clean, neat, bright and tight. Covers reliability, availability, human factors and safety.…

Trade paperback. Tata McGraw-Hill Edition. Trade paperback. Glued binding. xviii, 486 p. Formulae; Illustrations. References. Index. From Wikipedia: "Reliability engineering is engineering that emphasizes dependability in the lifecycle management of a product. Dependability, or reliability, describes the ability of a system or component to function under stated conditions for a specified period of time. Reliability engineering is a sub-discipline within systems engineering. Reliability is theoretically defined as the probability of failure, the frequency of failures, or in terms of availability, a probability derived from reliability and maintainability. Maintainability and maintenance may be defined as a part of reliability engineering. Reliability plays a key role in cost-effectiveness of systems. Although reliability is defined and affected by stochastic parameters, according to some acknowledged specialists, quality, reliability and safety are not achieved by mathematics and statistics. Nearly all teaching and literature on the subject emphasizes these aspects, and ignores the reality that the ranges of uncertainty involved largely invalidate quantitative methods for prediction and measurement. Reliability engineering for complex systems requires a different, more elaborate systems approach than for non-complex systems. Reliability engineering may involve the creation of proper use studies and requirements specification, hardware & software design, functional (failure) analysis, testing and analyzing manufacturing, maintenance, transport, storage, spare parts stocking, operations research, human factors and technical documentation. Also data and information acquisition / organisation may be of importance. Effective reliability engineering requires understanding of the basics of failure mechanisms for which experience, broad engineering skills and good knowledge from many different special fields of engineering, like: tribology-, stress / fracture mechanics-, fatigue-, thermal-, shock-, electrical-and chemical "engineering". Reliability engineering is closely related to safety engineering and system safety, in that they use common methods for their analysis and may require input from each other. Reliability engineering focuses on costs of failure caused by system downtime, cost of spares, repair equipment, personnel and cost of warranty claims. The focus of safety engineering is normally not on cost, but on preserving life and nature, and therefore deals only with particular dangerous system failure modes. High reliability (safety) levels are also here the result of good engineering, attention to detail and almost never the result of only re-active failure management (Reliability Accounting / Statistics). "Reliability is, after all, engineering in its most practical form" as once stated by James R. Schlesinger, Former US Secretary of Defense." Fair. Cover has some wear and soiling. International student edition sticker on front cover. Title page is missing. …

hardcover. Zustand: Good. Good with wear and markings.

Zustand: New. In English.

Zustand: New. This is a Brand-new US Edition. This Item may be shipped from US or any other country as we have multiple locations worldwide.

Hardcover. Zustand: Very Good. Zustand des Schutzumschlags: Good. 1st Edition. First edition, first printing. xviii, 334pp, with many diagrams, charts and illustrations in text. Black cloth-covered boards with gilt lettering to spine. 4to. Cloth slightly pushed in at spine tips, with traces of dustiness along the upper text block edge, else neat, clean, bright and tight throughout. Dust wrapper worn, chipped and bumped around edges, shelf worn, with a short corner crease on the inner front flap.…

hardcover. Zustand: Very Good. Most items will be dispatched the same or the next working day. A copy that has been read, but is in excellent condition. Pages are intact and not marred by notes or highlighting. The spine remains undamaged.

Zustand: New. In English.

Taschenbuch. Zustand: Neu. Neuware - 80% of your maintenance costs are determined during design Four hours of downtime equals $4,200 in damage. The real cost $18,000 over three years - because during design a cheaper motor was chosen that saved $3,000. Every $1,000 saved in design causes on average $47,000 in extra maintenance costs over the asset's lifetime. The problem: 80% of reliability problems originate during design and construction. This book shows you how to build reliability in from the very first design decision. Every phase treated systematically with concrete methodologies and calculation models. Complete methodology in 6 phases- Phase 1: Understanding the problem - the 80/20 rule of reliability engineering, the 5-Why technique for root causes, the iceberg principle: real costs are 3-5 times higher than visible repair costs- Phase 2: Specifications - stakeholder analysis, Early Equipment Management, and RAMS methodology (Reliability, Availability, Maintainability, Safety) to define quantitative objectives- Phase 3: Criticality analysis - set priorities across five risk dimensions: safety, environment, delivery reliability, quality, and sustainability. Determine which assets deserve $50,000-$500,000 in engineering versus a $500 basic analysis. Result: $1.3 million in savings, 18% higher availability- Phase 4: Design - FMEA: seven core questions identify all failure modes, RPN prioritizes improvements. Maintainability: five design principles (accessibility, visibility, standardization, modularity, diagnostics). RCM prevents both over- and under-maintenance- Phase 5: Economic justification - Life Cycle Costing: pump B ($12,000) saves $85,000 versus pump A ($8,000) through lower energy and maintenance costs. NPV calculations and business cases that convince management- Phase 6: Realization - commissioning, systematic supplier selection, and portfolio management creating $1.4 million in additional valueProven results- 35% lower lifecycle costs through thorough analysis- Up to 47:1 return on reliability investment- $1.3 million savings through criticality analysis- $50,000-$100,000 gain per asset through LCC- 60-80% fewer commissioning problemsTools included>Who is this book for >Part of a larger whole>About the author>Stop paying to fix in operations what went wrong during design.…

Zustand: New. This is a Brand-new US Edition. This Item may be shipped from US or any other country as we have multiple locations worldwide.

Zustand: New.

Zustand: Good. This is an ex-library book and may have the usual library/used-book markings inside.This book has hardback covers. In good all round condition. Please note the Image in this listing is a stock photo and may not match the covers of the actual item,1000grams, ISBN:9780070188525.

Zustand: New. pp. 284.

Paperback. Zustand: Good. Many books on reliability focus on either modeling or statistical analysis and require an extensive background in probability and statistics. Continuing its tradition of excellence as an introductory text for those with limited formal education in the subject, this classroom-tested book introduces the necessary concepts in probability and statistics within the context of their application to reliability. The Third Edition adds brief discussions of the Anderson-Darling test, the Cox proportionate hazards model, the Accelerated Failure Time model, and Monte Carlo simulation.Over 80 new end-of-chapter exercises have been added, as well as solutions to all odd-numbered exercises. Moreover, Excel workbooks, available for download, save students from performing numerous tedious calculations and allow them to focus on reliability concepts. Ebeling has created an exceptional text that enables readers to learn how to analyze failure, repair data, and derive appropriate models for reliability and maintainability as well as apply those models to all levels of design.…

Zustand: New. In English.

Taschenbuch. Zustand: Neu. Personalized and Customized Web Contents for Mobile Devices | Web / WAP Recommendation System based on Maintainability Software Engineering Paradigm | Mazin S. Al-Hakeem | Taschenbuch | Englisch | LAP Lambert Academic Publishing | EAN 9783659000041 | Verantwortliche Person für die EU: preigu GmbH & Co. KG, Lengericher Landstr. 19, 49078 Osnabrück, mail[at]preigu[dot]de | Anbieter: preigu.…

Taschenbuch. Zustand: Neu. Maintenance of Machinery | Maintainability Engineering | Muthuraman Subbiah | Taschenbuch | Englisch | 2025 | LAP LAMBERT Academic Publishing | EAN 9786206154082 | Verantwortliche Person für die EU: SIA OmniScriptum Publishing, Brivibas Gatve 197, 1039 RIGA, LETTLAND, customerservice[at]vdm-vsg[dot]de | Anbieter: preigu. …

Zustand: New. In English.

Zustand: New. In English.

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - This book covers advanced reliability and maintainability knowledge as applied to recent engineering problems. It highlights research in the fields of reliability measures of binary and complex engineering systems, cost analysis, simulations, optimizations, risk factors, and sensitivity analysis. The book scrutinizes various advanced tools and techniques, methodology, and concepts to solve the various engineering problems related to reliability and maintainability of the industrial system at minimum cost and maximum profit. It consists of 15 chapters and offers a platform to researchers, academicians, professionals and scientists to enhance their knowledge and understanding the concept of reliability in engineering.…

Buch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - This book covers advanced reliability and maintainability knowledge as applied to recent engineering problems. It highlights research in the fields of reliability measures of binary and complex engineering systems, cost analysis, simulations, optimizations, risk factors, and sensitivity analysis. The book scrutinizes various advanced tools and techniques, methodology, and concepts to solve the various engineering problems related to reliability and maintainability of the industrial system at minimum cost and maximum profit. It consists of 15 chapters and offers a platform to researchers, academicians, professionals and scientists to enhance their knowledge and understanding the concept of reliability in engineering.…