engineering innovation design proceedings (39 Ergebnisse)

1st ed. 2020. XIX, 407 p. Softcover. Einband bestoßen, daher Mängelexemplar gestempelt, sonst sehr guter Zustand. Imperfect copy due to slightly bumped cover, apart from this in very good condition. Stamped. Sprache: Englisch.

Zustand: New. In.

Zustand: New. In.

Zustand: New. In.

Zustand: Sehr gut. Zustand: Sehr gut | Seiten: 682 | Sprache: Englisch | Produktart: Bücher | This is the proceedings of the 21st International Conference on Engineering and Product Design Education. The conference is a collaboration between the publisher - the Design Society SIG on Design Education, the Institution of Engineering Designers and The University of Strathclyde Department of Design, Manufacturing and Engineering Management.

Zustand: Hervorragend. Zustand: Hervorragend | Seiten: 682 | Sprache: Englisch | Produktart: Bücher | This is the proceedings of the 21st International Conference on Engineering and Product Design Education. The conference is a collaboration between the publisher - the Design Society SIG on Design Education, the Institution of Engineering Designers and The University of Strathclyde Department of Design, Manufacturing and Engineering Management.

Paperback. Zustand: Brand New. 298 pages. 9.69x6.85x0.68 inches. In Stock.

Taschenbuch. Zustand: Neu. Advances in Design, Simulation and Manufacturing IV | Proceedings of the 4th International Conference on Design, Simulation, Manufacturing: The Innovation Exchange, DSMIE-2021, June 8-11, 2021, Lviv, Ukraine - Volume 2: Mechanical and Chemical Engineering | Vitalii Ivanov (u. a.) | Taschenbuch | Lecture Notes in Mechanical Engineering | xix | Englisch | 2021 | Springer | EAN 9783030778224 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu.

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - This book explores topics at the interface between mechanical and chemical engineering, with a focus on design, simulation, and manufacturing. Covering recent developments in the mechanics of solids and structures; numerical simulation of coupled problems, including wearing, compression, detonation and collision; and chemical process technologies, including ultrasonic technology, capillary rising process, pneumatic classification, membrane electrolysis and absorption processes, it reports on developments in the field of heat and mass transfer, energy-efficient technologies, and industrial ecology. Part of a two-volume set based on the 3rd International Conference on Design, Simulation, Manufacturing: The Innovation Exchange (DSMIE-2020), held on June 9-12, 2020, in Kharkiv, Ukraine, this book provides academics and professionals with extensive information on the latest trends, technologies and challenges in the field as well as practical lessons learned.

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - This book reports on topics at the interface between mechanical and chemical engineering, emphasizing design, simulation, and manufacturing. Specifically, it covers recent developments in the mechanics of solids and structures, numerical simulation of coupled problems, including fatigue, fluid behavior, particle movement, pressure distribution. Further, it reports on developments in chemical process technology, heat and mass transfer, energy-efficient technologies, and industrial ecology. Based on the 4th International Conference on Design, Simulation, Manufacturing: The Innovation Exchange (DSMIE-2021), held on June 8-11, 2021, in Lviv, Ukraine, this second volume of a 2-volume set provides academics and professionals with extensive information on trends, technologies, challenges and practice-oriented experience in the above-mentioned areas.

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - This book reports on topics at the interface between manufacturing and materials engineering, with a special emphasis on design and simulation issues. Specifically, it covers the development of CAx technologies for product design, the implementation of smart manufacturing systems and Industry 4.0 strategies, topics in technological assurance, numerical simulation and experimental studies on cutting, milling, grinding, pressing and profiling processes, as well as the development and implementation of new advanced materials. Based on the 3rd International Conference on Design, Simulation, Manufacturing: The Innovation Exchange (DSMIE-2020), held on June 9-12, 2020 in Kharkiv, Ukraine, this first volume in a two-volume set provides academics and professionals with extensive information on the latest trends, technologies, challenges and practice-oriented lessons learned in the above-mentioned areas.

Taschenbuch. Zustand: Neu. Advances in Design, Simulation and Manufacturing V | Proceedings of the 5th International Conference on Design, Simulation, Manufacturing: The Innovation Exchange, DSMIE-2022, June 7-10, 2022, Poznan, Poland - Volume 2: Mechanical and Chemical Engineering | Vitalii Ivanov (u. a.) | Taschenbuch | XVIII | Englisch | 2022 | Springer Nature Switzerland | EAN 9783031060434 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu.

Zustand: New. In.

Zustand: Hervorragend. Zustand: Hervorragend | Sprache: Englisch | Produktart: Bücher | Keine Beschreibung verfügbar.

Zustand: New.

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - This book reports on topics at the interface between mechanical and chemical engineering, emphasizing aspects related to design, simulation, and manufacturing. It covers recent findings concerning the mechanics of fluids, solids, and structures, and numerical and computational methods for solving coupled problems in manufacturing. Further, it reports on recent developments in chemical process technology, heat and mass transfer research, and energy-efficient technologies, describing applications in the food and energy production sector. Based on the 5th International Conference on Design, Simulation, Manufacturing: The Innovation Exchange (DSMIE-2022), held on June 7-10, 2022, in Poznan, Poland, this second volume of a 2-volume set provides academics and professionals with extensive information on trends and technologies, and challenges and practice-oriented experience in all the above-mentioned areas.

Zustand: New. pp. 682.

Taschenbuch. Zustand: Neu. Advances in Design, Simulation and Manufacturing IV | Proceedings of the 4th International Conference on Design, Simulation, Manufacturing: The Innovation Exchange, DSMIE-2021, June 8-11, 2021, Lviv, Ukraine - Volume 1: Manufacturing and Materials Engineering | Vitalii Ivanov (u. a.) | Taschenbuch | Lecture Notes in Mechanical Engineering | xx | Englisch | 2021 | Springer | EAN 9783030777180 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu.

Taschenbuch. Zustand: Neu. Advances in Design, Simulation and Manufacturing VIII | Proceedings of the 8th International Conference on Design, Simulation, Manufacturing: The Innovation Exchange, DSMIE-2025, June 17-20, 2025, Porto, Portugal - Volume 3: Materials Engineering and Engineering Education | Francisco J. G. Silva (u. a.) | Taschenbuch | Lecture Notes in Mechanical Engineering | xiv | Englisch | 2025 | Springer | EAN 9783031964121 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu.

Taschenbuch. Zustand: Neu. Advances in Design, Simulation and Manufacturing VI | Proceedings of the 6th International Conference on Design, Simulation, Manufacturing: The Innovation Exchange, DSMIE-2023, June 6-9, 2023, High Tatras, Slovak Republic - Volume 2: Mechanical and Materials Engineering | Vitalii Ivanov (u. a.) | Taschenbuch | Lecture Notes in Mechanical Engineering | xiv | Englisch | 2023 | Springer | EAN 9783031327735 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu.

Taschenbuch. Zustand: Neu. Advances in Design, Simulation and Manufacturing VII | Proceedings of the 7th International Conference on Design, Simulation, Manufacturing: The Innovation Exchange, DSMIE-2024, June 4-7, 2024, Pilsen, Czech Republic - Volume 2: Mechanical and Materials Engineering | Vitalii Ivanov (u. a.) | Taschenbuch | Lecture Notes in Mechanical Engineering | xix | Englisch | 2024 | Springer | EAN 9783031637193 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu.

Taschenbuch. Zustand: Neu. Advances in Design, Simulation and Manufacturing VII | Proceedings of the 7th International Conference on Design, Simulation, Manufacturing: The Innovation Exchange, DSMIE-2024, June 4-7, 2024, Pilsen, Czech Republic - Volume 1: Manufacturing Engineering | Vitalii Ivanov (u. a.) | Taschenbuch | Lecture Notes in Mechanical Engineering | xix | Englisch | 2024 | Springer | EAN 9783031617966 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu.

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - This book reports on advances in materials engineering, with a special emphasis on applying innovative approaches in coatings and protective technologies, particularly in the synthesis of new nanostructures, multilayer coatings, and ensuring antibacterial properties. It discusses wear behaviour for ferrous and non-ferrous materials. Further chapters report on the performance properties and mechanical characterization of composite and polymer materials for building efficiency and filtration applications. They also cover research results on cellulose, paper, and textile materials, focusing on strength properties. Yet, this book also describes innovative methods in engineering education, particularly the use of smart complexes and simulations to enhance students competencies growth based on professional, environmental, and economic culture. Based on the 8th International Conference on Design, Simulation, Manufacturing: The Innovation Exchange (DSMIE-2025), held on June 17-20, 2025, in Porto, Portugal, this third volume of a 4-volume set provides academics and professionals with extensive information on technologies, trends, challenges, and practice-oriented experience in all the above-mentioned areas.

Hardcover. Zustand: Brand New. 450 pages. 9.75x7.00x0.75 inches. In Stock.

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - This book reports on topics at the interface between mechanical and materials engineering, emphasizing aspects related to design, simulation, and manufacturing. It covers advanced methods in design engineering, applied to mechatronic systems, industrial equipment, turbines and drives. It reports on methods for improving the separation and prilling processes. It covers cutting-edge theoretical and experimental findings relating to material behavior, and materials, composites and coatings design. Further, it reports on advanced material treatments such as chemical-thermocycling, plasma deposition, and mechanical strengthening processes, among others. Based on the 6th International Conference on Design, Simulation, Manufacturing: The Innovation Exchange (DSMIE-2023), held on June 6-9, 2023, in High Tatras, Slovak Republic, this second volume of a 2-volume set provides academics and professionals with extensive information on trends and technologies, and challenges and practice-oriented experience in all the above-mentioned areas.

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - This book reports on advances in manufacturing, with a special emphasis on smart and sustainable systems and strategies. It covers advances in additive manufacturing, multi-pin ultrasonic peening, shot peening, and hot isostatic pressing; topics in stamping, injection moulding, assembly processes; strategies for improving the durability and service life of engineering products and machines; advances in machining processes, particularly milling and vibro-abrasive methods; and industrial robotics. Chapters report on theoretical research, mathematical modeling, and experimental studies concerning the design engineering of robots and machine tools, alike. They also discuss key aspects of quality assurance of products for milling and moulding processes, as well as multiaxis machining in flexible fixtures. Based on the 8th International Conference on Design, Simulation, Manufacturing: The Innovation Exchange (DSMIE-2025), held on June 17-20, 2025, in Porto, Portugal, this first volume of a 4-volume set provides academics and professionals with extensive information on technologies, trends, challenges, and practice-oriented experience in all the above-mentioned areas.

Taschenbuch. Zustand: Neu. Advances in Design, Simulation and Manufacturing V | Proceedings of the 5th International Conference on Design, Simulation, Manufacturing: The Innovation Exchange, DSMIE-2022, June 7-10, 2022, Poznan, Poland - Volume 1: Manufacturing and Materials Engineering | Vitalii Ivanov (u. a.) | Taschenbuch | Lecture Notes in Mechanical Engineering | xx | Englisch | 2022 | Springer | EAN 9783031060243 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu.

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - This book reports on topics at the interface between manufacturing and materials engineering, with a special emphasis on product design and advanced manufacturing processes, intelligent solutions for Industry 4.0, covers topics in ICT for engineering education, describes the numerical simulation and experimental studies of milling, honing, burnishing, grinding, boring, and turning, as well as the development and implementation of advanced materials. Based on the 4th International Conference on Design, Simulation, Manufacturing: The Innovation Exchange (DSMIE-2021), held on June 8-11, 2021, in Lviv, Ukraine, this first volume of a 2-volume set provides academics and professionals with extensive information on trends, technologies, challenges and practice-oriented experience in the above-mentioned areas.

Taschenbuch. Zustand: Neu. Advances in Design, Simulation and Manufacturing VI | Proceedings of the 6th International Conference on Design, Simulation, Manufacturing: The Innovation Exchange, DSMIE-2023, June 6-9, 2023, High Tatras, Slovak Republic - Volume 1: Manufacturing Engineering | Vitalii Ivanov (u. a.) | Taschenbuch | xvi | Englisch | 2023 | Springer | EAN 9783031327667 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu.

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - This book reports on advances in mechanical engineering, with a special emphasis on innovative design approaches, constructions and working processes, and on intelligent devices. It discusses physical aspects during pressing and vibrational processing, and findings relating to static stiffness and wear resistance. Further chapters report on the modeling and simulation of mechanical systems using mathematical modeling, numerical simulation, and experimental studies. This book also describes the use of LabVIEW, an infrared camera, and acoustic technology for the control and diagnostic of air leaks and radial runout of gear wheels. It discusses topics concerning the efficiency of systems and processes, reporting on new strategies for improving the design and operation of hydraulic machine rotors, screw and roller presses, and homogenizers, among others. Based on the 8th International Conference on Design, Simulation, Manufacturing: The Innovation Exchange (DSMIE-2025), held on June 17-20, 2025, in Porto, Portugal, this second volume of a 4-volume set provides academics and professionals with extensive information on technologies, trends, challenges, and practice-oriented experience in all the above-mentioned.