electrical station (37 Ergebnisse)

Hardcover. Zustand: As New. No Jacket. Pages are clean and are not marred by notes or folds of any kind. ~ ThriftBooks: Read More, Spend Less.

Hardcover. Zustand: Good. No Jacket. Pages can have notes/highlighting. Spine may show signs of wear. ~ ThriftBooks: Read More, Spend Less.

Zustand: New. pp. 468.

PAP. Zustand: New. New Book. Shipped from UK. Established seller since 2000.

Zustand: Good. 1929. No Edition Stated. Unpaginated. No dust jacket. Volume V: Sub-Station Work: Part I. Blue cloth. Book is in better condition than most examples of this age. Neat, clean, well bound pages with very minimal foxing, tanning and thumbing. Small inscriptions and neat labels may be present. Boards have mild shelf wear with light rubbing and corner bumping. Some light marking and sunning.

PAP. Zustand: New. New Book. Shipped from UK. Established seller since 2000.

Zustand: Good. 85 pp., pam bound with original paper wrappers retained, ex library, else textually clean and tight. - If you are reading this, this item is actually (physically) in our stock and ready for shipment once ordered. We are not bookjackers. Buyer is responsible for any additional duties, taxes, or fees required by recipient's country.

HRD. Zustand: New. New Book. Shipped from UK. Established seller since 2000.

Zustand: New. In.

HRD. Zustand: New. New Book. Shipped from UK. Established seller since 2000.

Soft cover. Zustand: New. Contents Preface Principal Symbols and Abbreviations Introduction 1 Prediction of Load 2 Choice of Power Station and Units 3 Diesel-electric Stations Preliminary Design 4 Steam Stations Preliminary Design 5 Gas Turbine Stations and Combined Cycles 6 Elements of Nuclear Power Stations 7 Hydro-electric Stations Preliminary Design-I 8 Hydro-electric Stations Preliminary Design-II 9 Combination of Hydro-electric and Steam Stations 10 Major Electrical Plant in Power Stations 11 Power Stations Control and Interconnection 12 Protective Relaying for Power Stations 13 Economic Loading of Power Stations 14 Modern Trends in Power Station Design and Operation 15 Modern Trends in Power Plant Instrumentation and Control 16 Unconventional Sources of Energy and Plants Appendix A Appendix B Appendix C Appendix D Index   This comprehensive textbook is primarily aimed at undergraduate engineering students of Electrical Engineering both at degree and diploma level The book covers preliminary designs and economic loading of diesel-electric stations steam stations nuclear power stations and hydro-electric stations It discusses load forecasting economic load dispatch unit commitment problem methods of scheduling stations allocation control system reliability and system security Trends in power plant instrumentation and control are also presented The important problems of pollution control and performance standards of thermal power stations are discussed The application of computers in power systems is touched The book also explains the need of using unconventional sources of energy and plants like biogas plants biomass plants solar electric system and wind electric system to save fossil fuels Rural energy demands and methods of forecasting energy demands are elaborated 468 pp.

Hardcover. Zustand: Fair. Fourth Thousand., Second Edition Revised. 275pp + list. A well used example with a worn cover but all complete and still well bound together. . Interior in used but clean condition - no deliberate markings. Owner's name in pencil (could be erased) on 1st blank.

Zustand: Guter Zustand. ***Ansichtskarte Balfour reception at the Electrical Station*** ungelaufen, guter Zustand | Preis: 13.00 EUR | Keine MwSt.-Ausweisung, differenzbesteuert gem.§25a UStG | Versandkosten: Kostenloser Versand | Motive / Thematik > Judaika > weitere Judaika.

Zustand: Good. 225 pp., softcover, ex library, else textually clean & tight. - If you are reading this, this item is actually (physically) in our stock and ready for shipment once ordered. We are not bookjackers. Buyer is responsible for any additional duties, taxes, or fees required by recipient's country.

Zustand: Good. 1936. Unknown Binding. Clean copy with shelf wear and some foxing. Scribbles in pen on right of front cover. Pages themselves remain very good. . . . . Books ship from the US and Ireland.

Zustand: New. In.

Zustand: New. In.

Zustand: New.

Zustand: New. KlappentextrnrnThis thesis outlines the design of the electrical components for the space-based ChromoTomography Experiment (CTEx). CTEx is the next step in the development of high-speed chromotomography at the Air Force Institute of Technology.

Zustand: Good. Presumed First Edition, First printing. Format is approximately 8.5 inches by 11 inches. Front side is primarily text and back side is primarily illustrations. The front side top half is text and technical data. The lower half is a drawing of the Space Station which an area of emphasis where the Solar Power Module would be located. The other side has four images: Solar Array Being Deployed in Bay of Space Shuttle, Space Station in Orbit (Artist's Concept), Solar Dynamic Concentrator-Receiver Test Facility, and Space Power Electronics Laboratory. The Rocketdyne Division was founded by North American Aviation (NAA) in 1955, and was later part of Rockwell International (1967-1996). Rocketdyne became the major supplier for NASA's development efforts, supplying all of the major engines for the Saturn rocket. Rocketdyne's H-1 engine was used by the Saturn I booster main stage. Five F-1 engines powered the Saturn V's, S-IC, first stage, while five J-2 engines powered its S-II second stage, and one J-2 the S-IVB third stages. By 1965, Rocketdyne built the vast majority of United States rocket engines, Through the end of the twentieth century, Rocketdyne products powered all major engines for the Saturn program and every space program in the United States. During continued downsizing in the 1980s and 1990s, Rockwell International shed several parts of the former North American Rockwell corporation. The aerospace entities of Rockwell International, including the former NAA and Rocketdyne, were sold to Boeing in 1996. Rocketdyne became part of Boeing's Defense division. Space Station Freedom was a NASA project to construct a permanently crewed Earth-orbiting space station in the 1980s. Although approved by then-president Ronald Reagan and announced in the 1984 State of the Union address, Freedom was never constructed or completed as originally designed, and after several cutbacks, the project evolved into the International Space Station program. Space Station Freedom was a joint project between four participating space agencies: NASA (United States), NASDA (Japan), ESA (Europe), and CSA (Canada). As the Apollo program began to wind down in the late 1960s, there were numerous proposals for what should follow it. Of the many proposals, large and small, three major themes emerged. Foremost among them was a crewed mission to Mars, using systems not unlike the ones used for Apollo. A permanent space station was also a major goal, both to help construct the large spacecraft needed for a Mars mission as well as to learn about long-term operations in space. Finally, a space logistics vehicle was intended to cheaply launch crews and cargo to that station. In the early 1970s, Spiro Agnew took these general plans to President Nixon, who was battling with a major federal budget deficit. When he presented the three concepts, Nixon told him to select one. After much debate, NASA selected the space logistics vehicle, which by this time was already known as the Space Shuttle. They argued that the Shuttle would so lower costs of launching cargo that it would make the construction of the station less expensive. From this point forward these plans were never seriously changed, in spite of dramatic changes to the funding environment and the complete redesign of the Shuttle concept. In the early 1980s, with the Space Shuttle completed, NASA proposed the creation of a large, permanently crewed space station, which then-NASA Administrator James M. Beggs called "the next logical step" in space. In some ways it was meant to be the U.S. answer to the Soviet Mir. NASA plans called for the station, which was later dubbed Space Station Freedom, to function as an orbiting repair shop for satellites, an assembly point for spacecraft, an observation post for astronomers, a microgravity laboratory for scientists, and a microgravity factory for companies. Reagan announced plans to build Space Station Freedom in 1984, stating: "We can follow our dreams to distant stars, living and working in space for peaceful.

Zustand: New.

Taschenbuch. Zustand: Neu. Neuware - This work has been selected by scholars as being culturally important, and is part of the knowledge base of civilization as we know it. This work was reproduced from the original artifact, and remains as true to the original work as possible. Therefore, you will see the original copyright references, library stamps (as most of these works have been housed in our most important libraries around the world), and other notations in the work.

Taschenbuch. Zustand: Neu. Neuware - 'Electrical Measurements and Meter Testing in the Power Station' serves as a comprehensive technical manual for engineers and technicians involved in the maintenance and calibration of power station equipment. This work provides detailed insights into the practical application of measuring instruments within the demanding environment of an electrical power plant, focusing on the precision required for large-scale utility operations.The text covers a broad range of topics essential for ensuring the efficiency and accuracy of power generation systems. It delves into the principles of various measuring devices, including ammeters, voltmeters, and watt-hour meters, while outlining systematic procedures for their testing and adjustment. By addressing the challenges of both direct and alternating current systems, the volume offers a thorough overview of the technical standards utilized to monitor electrical output and consumption during a pivotal era of industrial electrification.This work remains a significant resource for those interested in the history of electrical engineering and the development of power distribution technology. It highlights the rigorous methodologies required to maintain precision in high-voltage settings, making it a foundational reference for understanding the evolution of industrial electrical measurement and the critical role of meter testing in early twentieth-century infrastructure.This work has been selected by scholars as being culturally important, and is part of the knowledge base of civilization as we know it. This work was reproduced from the original artifact, and remains as true to the original work as possible. Therefore, you may see the original copyright references, library stamps (as most of these works have been housed in our most important libraries around the world), and other notations in the work.This work is in the public domain in the United States of America, and possibly other nations. Within the United States, you may freely copy and distribute this work, as no entity (individual or corporate) has a copyright on the body of the work.As a reproduction of a historical artifact, this work may contain missing or blurred pages, poor pictures, errant marks, etc. Scholars believe, and we concur, that this work is important enough to be preserved, reproduced, and made generally available to the public. We appreciate your support of the preservation process, and thank you for being an important part of keeping this knowledge alive and relevant.

Taschenbuch. Zustand: Neu. Neuware - This thesis outlines the design of the electrical components for the space-based ChromoTomography Experiment (CTEx). CTEx is the next step in the development of high-speed chromotomography at the Air Force Institute of Technology. The electrical design of the system is challenging due to the large amount of data that is acquired by the imager and the limited resources that is inherent with space-based systems. Additional complication to the design is the need to know the angle of a spinning prism that is in the field of view very precisely for each image.

Zustand: Good. 1936. Unknown Binding. Clean copy with shelf wear and some foxing. Scribbles in pen on right of front cover. Pages themselves remain very good. . . . .

Buch. Zustand: Neu. Neuware - 'Electrical Measurements and Meter Testing in the Power Station' serves as a comprehensive technical manual for engineers and technicians involved in the maintenance and calibration of power station equipment. This work provides detailed insights into the practical application of measuring instruments within the demanding environment of an electrical power plant, focusing on the precision required for large-scale utility operations.The text covers a broad range of topics essential for ensuring the efficiency and accuracy of power generation systems. It delves into the principles of various measuring devices, including ammeters, voltmeters, and watt-hour meters, while outlining systematic procedures for their testing and adjustment. By addressing the challenges of both direct and alternating current systems, the volume offers a thorough overview of the technical standards utilized to monitor electrical output and consumption during a pivotal era of industrial electrification.This work remains a significant resource for those interested in the history of electrical engineering and the development of power distribution technology. It highlights the rigorous methodologies required to maintain precision in high-voltage settings, making it a foundational reference for understanding the evolution of industrial electrical measurement and the critical role of meter testing in early twentieth-century infrastructure.This work has been selected by scholars as being culturally important, and is part of the knowledge base of civilization as we know it. This work was reproduced from the original artifact, and remains as true to the original work as possible. Therefore, you may see the original copyright references, library stamps (as most of these works have been housed in our most important libraries around the world), and other notations in the work.This work is in the public domain in the United States of America, and possibly other nations. Within the United States, you may freely copy and distribute this work, as no entity (individual or corporate) has a copyright on the body of the work.As a reproduction of a historical artifact, this work may contain missing or blurred pages, poor pictures, errant marks, etc. Scholars believe, and we concur, that this work is important enough to be preserved, reproduced, and made generally available to the public. We appreciate your support of the preservation process, and thank you for being an important part of keeping this knowledge alive and relevant.

Zustand: Good. Your purchase helps support Sri Lankan Children's Charity 'The Rainbow Centre'. Ex-library, so some stamps and wear, but in good overall condition. Our donations to The Rainbow Centre have helped provide an education and a safe haven to hundreds of children who live in appalling conditions.

Taschenbuch. Zustand: Neu. Microgravity Electrical Separator | A new development of life and power support systems of International Space Station | Michael Shoikhedbrod (u. a.) | Taschenbuch | Englisch | 2025 | LAP LAMBERT Academic Publishing | EAN 9786208435516 | Verantwortliche Person für die EU: preigu GmbH & Co. KG, Lengericher Landstr. 19, 49078 Osnabrück, mail[at]preigu[dot]de | Anbieter: preigu.

Zustand: New. In.

Zustand: New.