Gesamtpreis (1 Artikel Artikel):
Versandziel:
computer aided design manufacturing (86 Ergebnisse)
Direkt zu den wichtigsten Suchergebnissen
Suchfilter
Produktart
- Alle Product Types
- Bücher (86)
- Magazine & Zeitschriften (Keine weiteren Ergebnisse entsprechen dieser Verfeinerung)
- Comics (Keine weiteren Ergebnisse entsprechen dieser Verfeinerung)
- Noten (Keine weiteren Ergebnisse entsprechen dieser Verfeinerung)
- Kunst, Grafik & Poster (Keine weiteren Ergebnisse entsprechen dieser Verfeinerung)
- Fotografien (Keine weiteren Ergebnisse entsprechen dieser Verfeinerung)
- Karten (Keine weiteren Ergebnisse entsprechen dieser Verfeinerung)
- Manuskripte & Papierantiquitäten (Keine weiteren Ergebnisse entsprechen dieser Verfeinerung)
Zustand Mehr dazu
Weitere Eigenschaften
- Erstausgabe (4)
- Signiert (Keine weiteren Ergebnisse entsprechen dieser Verfeinerung)
- Schutzumschlag (Keine weiteren Ergebnisse entsprechen dieser Verfeinerung)
- Angebotsfoto (23)
Sprache (3)
Gratisversand
Land des Verkäufers
Verkäuferbewertung
-
Computer-Aided Design and Manufacturing. Methods and Tools. Second, Revised and Enlarged Edition
Anbieter: Zubal-Books, Since 1961, Cleveland, OH, USA
Verkäuferbewertung 5 von 5 Sternen
Zustand: Good. 2nd edition, 458 pp., hardcover, ex library, else text and binding clean, tight, and bright. - If you are reading this, this item is actually (physically) in our stock and ready for shipment once ordered. We are not bookjackers. Buyer is responsible for any additional duties, taxes, or fees required by recipient's country.
-
Geometric and Algorithmic Aspects of Computer-aided Design and Manufacturing: Dimacs Workshop Computer Aided Design and Manufacturing, October 7-9, . AND THEORETICAL COMPUTER SCIENCE, 67)
Sprache: Englisch
Verlag: Amer Mathematical Society, 2005
ISBN 10: 0821836285 ISBN 13: 9780821836286
Anbieter: ThriftBooks-Dallas, Dallas, TX, USA
Verkäuferbewertung 5 von 5 Sternen
Hardcover. Zustand: As New. No Jacket. Pages are clean and are not marred by notes or folds of any kind. ~ ThriftBooks: Read More, Spend Less.
-
Computer-Aided Design and Manufacturing
Anbieter: ThriftBooks-Atlanta, AUSTELL, GA, USA
Verkäuferbewertung 5 von 5 Sternen
Hardcover. Zustand: Very Good. No Jacket. May have limited writing in cover pages. Pages are unmarked. ~ ThriftBooks: Read More, Spend Less.
-
Elements of Computer-Aided Design and Manufacturing
Sprache: Englisch
Verlag: Wiley & Sons, Incorporated, John, 1984
ISBN 10: 0471881945 ISBN 13: 9780471881940
Anbieter: Better World Books, Mishawaka, IN, USA
Verkäuferbewertung 5 von 5 Sternen
Erstausgabe
Zustand: Good. 1st Edition. Former library book; may include library markings. Used book that is in clean, average condition without any missing pages.
-
CAD/CAM: Computer-Aided Design and Manufacturing
Anbieter: WorldofBooks, Goring-By-Sea, WS, Vereinigtes Königreich
Verkäuferbewertung 5 von 5 Sternen
EUR 8,19
EUR 6,42 Versand
Versand von Vereinigtes Königreich nach USAAnzahl: 1 verfügbar
In den WarenkorbPaperback. Zustand: Very Good. The book has been read, but is in excellent condition. Pages are intact and not marred by notes or highlighting. The spine remains undamaged.
-
CAD-CAM : Computer-Aided Design and Manufacturing
Sprache: Englisch
Verlag: Pearson Education, Limited, 1983
ISBN 10: 0131101307 ISBN 13: 9780131101302
Anbieter: Better World Books Ltd, Dunfermline, Vereinigtes Königreich
Verkäuferbewertung 5 von 5 Sternen
Erstausgabe
EUR 5,37
EUR 9,17 Versand
Versand von Vereinigtes Königreich nach USAAnzahl: 1 verfügbar
In den WarenkorbZustand: Good. 1st. Ships from the UK. Former library book; may include library markings. Used book that is in clean, average condition without any missing pages.
-
Cad/cam: Computer-aided Design And Manufacturing
Anbieter: AwesomeBooks, Wallingford, Vereinigtes Königreich
Verkäuferbewertung 5 von 5 Sternen
EUR 10,18
EUR 5,72 Versand
Versand von Vereinigtes Königreich nach USAAnzahl: 1 verfügbar
In den Warenkorbpaperback. Zustand: Very Good. Cad/cam: Computer-aided Design And Manufacturing This book is in very good condition and will be shipped within 24 hours of ordering. The cover may have some limited signs of wear but the pages are clean, intact and the spine remains undamaged. This book has clearly been well maintained and looked after thus far. Money back guarantee if you are not satisfied. See all our books here, order more than 1 book and get discounted shipping. .
-
Computer Aided Design and Manufacturing
Anbieter: Majestic Books, Hounslow, Vereinigtes Königreich
Verkäuferbewertung 4 von 5 Sternen
EUR 8,80
EUR 7,45 Versand
Versand von Vereinigtes Königreich nach USAAnzahl: 4 verfügbar
In den WarenkorbZustand: New. pp. 300.
-
Elements of Computer-Aided Design and Manufacturing
Anbieter: Wonder Book, Frederick, MD, USA
Verkäuferbewertung 5 von 5 Sternen
Zustand: Fair. Acceptable condition. A readable, intact copy that may have noticeable tears and wear to the spine. All pages of text are present, but they may include extensive notes and highlighting or be heavily stained. Includes reading copy only books.
-
Cad/cam: Computer-aided Design And Manufacturing
Anbieter: Bahamut Media, Reading, Vereinigtes Königreich
Verkäuferbewertung 5 von 5 Sternen
EUR 10,18
EUR 8,00 Versand
Versand von Vereinigtes Königreich nach USAAnzahl: 1 verfügbar
In den Warenkorbpaperback. Zustand: Very Good. Shipped within 24 hours from our UK warehouse. Clean, undamaged book with no damage to pages and minimal wear to the cover. Spine still tight, in very good condition. Remember if you are not happy, you are covered by our 100% money back guarantee.
-
CAD/CAM: Computer-Aided Design and Manufacturing
Anbieter: Anybook.com, Lincoln, Vereinigtes Königreich
Verkäuferbewertung 5 von 5 Sternen
EUR 2,96
EUR 15,36 Versand
Versand von Vereinigtes Königreich nach USAAnzahl: 1 verfügbar
In den WarenkorbZustand: Poor. This is an ex-library book and may have the usual library/used-book markings inside.This book has hardback covers. In poor condition, suitable as a reading copy. No dust jacket. Please note the Image in this listing is a stock photo and may not match the covers of the actual item,1100grams, ISBN:0131101307.
-
CAD/CAM: Computer Aided Design and Manufacturing
Sprache: Englisch
Verlag: Prentice Hall International Paperback Editions, 1984
ISBN 10: 0131102559 ISBN 13: 9780131102552
Anbieter: Anybook.com, Lincoln, Vereinigtes Königreich
Verkäuferbewertung 5 von 5 Sternen
EUR 2,96
EUR 15,36 Versand
Versand von Vereinigtes Königreich nach USAAnzahl: 1 verfügbar
In den WarenkorbZustand: Fair. This is an ex-library book and may have the usual library/used-book markings inside.This book has hardback covers. In fair condition, suitable as a study copy. No dust jacket. Re-bound by library. Please note the Image in this listing is a stock photo and may not match the covers of the actual item,1100grams, ISBN:0131102559.
-
Microprocessors for Management: Computer Aided Design, Computer Aided Manufacturing and Robotics
Anbieter: Majestic Books, Hounslow, Vereinigtes Königreich
Verkäuferbewertung 4 von 5 Sternen
EUR 12,63
EUR 7,45 Versand
Versand von Vereinigtes Königreich nach USAAnzahl: 4 verfügbar
In den WarenkorbZustand: New. pp. 307.
-
What Every Engineer Should Know about Computer-Aided Design and Computer-Aided Manufacturing: The CAD/CAM Revolution
Anbieter: ThriftBooks-Dallas, Dallas, TX, USA
Verkäuferbewertung 5 von 5 Sternen
Hardcover. Zustand: Good. No Jacket. Pages can have notes/highlighting. Spine may show signs of wear. ~ ThriftBooks: Read More, Spend Less.
-
Cad/Cam : Computer-Aided Design And Manufacturing
Anbieter: Majestic Books, Hounslow, Vereinigtes Königreich
Verkäuferbewertung 4 von 5 Sternen
EUR 16,14
EUR 7,45 Versand
Versand von Vereinigtes Königreich nach USAAnzahl: 2 verfügbar
In den WarenkorbZustand: New. pp. 512.
-
Sonderangebot
EUR 5,84
EUR 20,50 Versand
Versand von Frankreich nach USAAnzahl: 1 verfügbar
In den WarenkorbHardcover. Zustand: Très bon. Ancien livre de bibliothèque. Couverture différente. Edition 1982. Ammareal reverse jusqu'à 15% du prix net de cet article à des organisations caritatives. ENGLISH DESCRIPTION Book Condition: Used, Very good. Former library book. Different cover. Edition 1982. Ammareal gives back up to 15% of this item's net price to charity organizations.
-
Introduction to Computer Aided Design, Engineering and Manufacturing Using Mechanical Model
Verlag: FriesenPress, 2024
Anbieter: Books From California, Simi Valley, CA, USA
Verkäuferbewertung 5 von 5 Sternen
Paperback. Zustand: Fine.
-
Computer Aided Design & manufacturing for Anna University R17 CBCS (VI- MECH -ME8691)
Sprache: Englisch
ISBN 10: 8194382513 ISBN 13: 9788194382515
Anbieter: Majestic Books, Hounslow, Vereinigtes Königreich
Verkäuferbewertung 4 von 5 Sternen
EUR 12,99
EUR 7,45 Versand
Versand von Vereinigtes Königreich nach USAAnzahl: 4 verfügbar
In den WarenkorbZustand: New.
-
Internationale AusgabeCad/Cam: Computer-Aided Design and Manufacturing
Anbieter: Romtrade Corp., STERLING HEIGHTS, MI, USA
Verkäuferbewertung 5 von 5 Sternen
Zustand: New. Brand New. Soft Cover International Edition. Different ISBN and Cover Image. Priced lower than the standard editions which is usually intended to make them more affordable for students abroad. The core content of the book is generally the same as the standard edition. The country selling restrictions may be printed on the book but is no problem for the self-use. This Item maybe shipped from US or any other country as we have multiple locations worldwide.
-
Engineering Productivity Through Computer Aided Design/Computer Aided Manufacturing (Computer Aided Engineering)
Anbieter: WeBuyBooks, Rossendale, LANCS, Vereinigtes Königreich
Verkäuferbewertung 5 von 5 Sternen
EUR 23,78
EUR 7,48 Versand
Versand von Vereinigtes Königreich nach USAAnzahl: 1 verfügbar
In den WarenkorbZustand: Good. Most items will be dispatched the same or the next working day. A copy that has been read but remains in clean condition. All of the pages are intact and the cover is intact and the spine may show signs of wear. The book may have minor markings which are not specifically mentioned.
-
Animal Care from Protozoa to Small Mammals - Computer-Aided Design and Manufacturing
Anbieter: Romtrade Corp., STERLING HEIGHTS, MI, USA
Verkäuferbewertung 5 von 5 Sternen
Zustand: New. This is a Brand-new US Edition. This Item may be shipped from US or any other country as we have multiple locations worldwide.
-
What Every Engineer Should Know about Computer-Aided Design and Computer-Aided Manufacturing Vol. 10 : The CAD-CAM Revolution
Anbieter: Better World Books Ltd, Dunfermline, Vereinigtes Königreich
Verkäuferbewertung 5 von 5 Sternen
Erstausgabe
EUR 26,72
EUR 9,17 Versand
Versand von Vereinigtes Königreich nach USAAnzahl: 1 verfügbar
In den WarenkorbZustand: Good. 1st Edition. Ships from the UK. Former library book; may include library markings. Used book that is in clean, average condition without any missing pages.
-
Cost Management for Today's Advanced Manufacturing: The CAM-I Conceptual Design: Computer Aided Manufacturing-1 Conceptual Design
Sprache: Englisch
Verlag: Harvard Business School Press 01.12.1988., 1988
ISBN 10: 087584197X ISBN 13: 9780875841977
Anbieter: NEPO UG, Rüsselsheim am Main, Deutschland
Verkäuferbewertung 5 von 5 Sternen
Zustand: Gut. 253 Seiten ex Library Book aus einer wissenschafltichen Bibliothek Sprache: Englisch Gewicht in Gramm: 969 23,9 x 17,3 x 2,8 cm, Gebundene Ausgabe.
-
Computer Aided and Integrated Manufacturing Systems: Computer Aided Design/ Computer Aided Manufacturing (CAD/CAM) (Volume 4)
Sprache: Englisch
Verlag: World Scientific Publishing, 2003
ISBN 10: 9812383395 ISBN 13: 9789812383396
Anbieter: Anybook.com, Lincoln, Vereinigtes Königreich
Verkäuferbewertung 5 von 5 Sternen
EUR 28,72
EUR 15,36 Versand
Versand von Vereinigtes Königreich nach USAAnzahl: 1 verfügbar
In den WarenkorbZustand: Good. Volume 4. This is an ex-library book and may have the usual library/used-book markings inside.This book has hardback covers. Clean from markings. In good all round condition. No dust jacket. Please note the Image in this listing is a stock photo and may not match the covers of the actual item,900grams, ISBN:9789812383396.
-
Models For Computer Aided Tolerancing In Design And Manufacturing
Anbieter: Romtrade Corp., STERLING HEIGHTS, MI, USA
Verkäuferbewertung 5 von 5 Sternen
Zustand: New. This is a Brand-new US Edition. This Item may be shipped from US or any other country as we have multiple locations worldwide.
-
Blurring the Lines: Computer-Aided Design and Manufacturing in Contemporary Architecture: 3 (Architecture in Practice)
Anbieter: WeBuyBooks, Rossendale, LANCS, Vereinigtes Königreich
Verkäuferbewertung 5 von 5 Sternen
EUR 39,31
EUR 7,58 Versand
Versand von Vereinigtes Königreich nach USAAnzahl: 1 verfügbar
In den WarenkorbZustand: Very Good. Most items will be dispatched the same or the next working day. A copy that has been read, but is in excellent condition. Pages are intact and not marred by notes or highlighting. The spine remains undamaged.
-
Introduction to Computer Aided Design, Engineering and Manufacturing: Using Mechanical Model
Anbieter: Revaluation Books, Exeter, Vereinigtes Königreich
Verkäuferbewertung 5 von 5 Sternen
EUR 37,04
EUR 11,46 Versand
Versand von Vereinigtes Königreich nach USAAnzahl: 2 verfügbar
In den WarenkorbPaperback. Zustand: Brand New. 252 pages. 6.00x0.68x9.00 inches. In Stock.
-
![Bild des Verkäufers für Blueprint Reading Basics: manufacturing print reading [The basics of manufacturing prints -- The reading of manufacturing prints -- The lines and views of manufacturing prints -- The total manufacturing prints -- Dimensions -- Tolerances -- Surface texture -- Threads -- Fasteners -- Gears -- Machine terms and holes -- Machining requirements -- Geometric dimensioning and tolerancing -- Types of manufacturing prints and computer-aided design] zum Verkauf von Joseph Valles - Books](https://pictures.abebooks.com/inventory/md/md32230648296.jpg)
Blueprint Reading Basics: manufacturing print reading [The basics of manufacturing prints -- The reading of manufacturing prints -- The lines and views of manufacturing prints -- The total manufacturing prints -- Dimensions -- Tolerances -- Surface texture -- Threads -- Fasteners -- Gears -- Machine terms and holes -- Machining requirements -- Geometric dimensioning and tolerancing -- Types of manufacturing prints and computer-aided design]
Sprache: Englisch
Verlag: Industrial Press, New York, N.Y., 2001, 2001
ISBN 10: 083113125X ISBN 13: 9780831131258
Anbieter: Joseph Valles - Books, Stockbridge, GA, USA
Verkäuferbewertung 5 von 5 Sternen
Soft cover. Zustand: Fine. 3rd Edition. vi, 314 p. : ill. ; 28 cm. ; LCCN 2001016820 ; LC T379 .H34 2001 ; Dewey 604.2/5 ; ISBN 9780831131258, 083113125X OCLC 45841512 ; pictorial stiff paper wrappers ; Contents: The basics of manufacturing prints -- The reading of manufacturing prints -- The lines and views of manufacturing prints -- The total manufacturing prints -- Dimensions -- Tolerances -- Surface texture -- Threads -- Fasteners -- Gears -- Machine terms and holes -- Machining requirements -- Geometric dimensioning and tolerancing -- Types of manufacturing prints and computer-aided design ; A self-training manual on blueprint reading includes industry standards, practices, copies of industrial prints, and explanations of blueprint reading theory and industry applications ; Third edition of this widely used text and self-training manual has been expanded to include many new worksheets designed to facilitate the reader's ability to form a mental picture from a drawing. Each chapter contains an introduction, a detailed review, illustrations, review questions, and worksheets. Industry standards (including ASME Y14.5, Geometric Dimensioning and Tolerancing), practices, and copies of industrial blueprints are included throughout to provide a balanced presentation of theory and application. This book is written in a nontechnical and easy-to-understand manner that is appropriate for machinists, mechanics, technicians, and inspectors, as well as students taking blueprint reading, machine shop, or tool and die courses. All exercises were conceived as teaching aids and have been classroom tested. ; FINE. Book.
-
Introduction to Computer Aided Design, Engineering and Manufacturing: Using Mechanical Model
Anbieter: Revaluation Books, Exeter, Vereinigtes Königreich
Verkäuferbewertung 5 von 5 Sternen
EUR 51,18
EUR 14,33 Versand
Versand von Vereinigtes Königreich nach USAAnzahl: 2 verfügbar
In den WarenkorbHardcover. Zustand: Brand New. 252 pages. 6.00x0.81x9.00 inches. In Stock.
-
Shape Interrogation for Computer Aided Design and Manufacturing
HARDCOVER. Zustand: Near Fine. Hardcover edition. 408pp. Octavo hardbound, tight binding. Minor cover wear, interior clean throughout.
