Characterization metals alloys (27 Ergebnisse)

Zustand: Used Like New. NEW & UNREAD. Light wear & bumps to the hardcover. Content is like new.

Zustand: New.

Zustand: New.

Hardcover. Zustand: Brand New. 1st edition. 148 pages. 9.00x6.25x0.50 inches. In Stock.

Zustand: New. This Materials Research Society Proceedings contains papers presented at Symposium 2D 'Structural and Chemical Characterization of Metals, Alloys and Compounds'. Editor(s): Campos, Ramiro Perez; Cuevas, Antonio Contreras; Munoz, Rodrigo A. Esparza. Series: MRS Proceedings. Num Pages: 148 pages, 118 b/w illus. 12 tables. BIC Classification: TGM. Category: (U) Tertiary Education (US: College). Dimension: 157 x 236 x 15. Weight in Grams: 376. . 2013. Hardback. . . . . Books ship from the US and Ireland. …

Zustand: New. pp. 310.

Zustand: New.

Zustand: New.

Buch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - The XXI International Materials Research Congress was held in Cancun, Mexico in August 2012. This Materials Research Society Proceedings contains papers presented at Symposium 2D 'Structural and Chemical Characterization of Metals, Alloys and Compounds'. This special issue covers several aspects of the structural and chemical characterization of the materials in the following areas: metals, alloys, steels, composites, polymeric compounds, welding, nanomaterials and surface coatings, among others. They are amorphous, crystalline, powders, coatings, fibers, thin films, etc., which were prepared with different techniques. The structural characterization techniques included: scanning electron microscopy (SEM), X-ray diffraction (XRD), transmission electron microscopy (TEM), Raman spectroscopy, optical microscopy (OM), Fourier transform infrared spectroscopy (FTIR), differential thermal analysis (DTA), differential scanning calorimetry (DSC), thermogravimetry analysis (TGA), thermoluminescence (TL), laser emission, etc. Theoretical models from these properties are included too.…

Zustand: New.

Zustand: As New. Unread book in perfect condition.

Zustand: New. pp. xi + 212 144 Illus.

Zustand: New.

Zustand: New. The XXIII International Materials Research Congress was held on August 17-21, 2014, in Cancun, Mexico. Editor(s): Campos, Ramiro Perez; Cuevas, Antonio Contreras; Munoz, Rodrigo A. Esparza. Series: MRS Proceedings. Num Pages: 200 pages, 119 b/w illus. 44 tables. BIC Classification: TGM. Category: (U) Tertiary Education (US: College). Dimension: 159 x 237 x 16. Weight in Grams: 418. . 2015. Illustrated. hardcover. . . . . Books ship from the US and Ireland. …

Hardcover. Zustand: Brand New. 189 pages. 9.50x6.50x1.00 inches. In Stock.

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - Thisbook covers various aspects of characterization of materials in the areas ofmetals, alloys, steels, welding, nanomaterials, intermetallic, and surfacecoatings. These materials are obtained by different methods and techniques likespray, mechanical milling, sol-gel, casting, biosynthesis, and chemicalreduction among others. Some of these materials are classified according toapplication such as materials for medical application, materials for industrialapplications, materials used in the oil industry and materials used likecoatings. The authors provide a comprehensive overview of structuralcharacterization techniques including scanning electron microscopy (SEM), X-raydiffraction (XRD), transmission electron microscopy (TEM), Raman spectroscopy, imageanalysis, finite element method (FEM), optical microscopy (OM), energy dispersive spectroscopy (EDS), Fourier transform infrared spectroscopy(FTIR), differential thermal analysis (DTA), differential scanning calorimetry(DSC), ultraviolet-visible spectroscopy (UV-Vis), infrared photo-thermalradiometry (IPTR), electrochemical impedance spectroscopy (EIS), thermogravimetryanalysis (TGA), thermo luminescence (TL), photoluminescence (PL), high resolutiontransmission electron microscopy (HRTEM), and radio frequency (RF). The bookincludes theoretical models and illustrations of characterization properties-bothstructural and chemical.…

Buch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - Thisbook covers various aspects of characterization of materials in the areas ofmetals, alloys, steels, welding, nanomaterials, intermetallic, and surfacecoatings. These materials are obtained by different methods and techniques likespray, mechanical milling, sol-gel, casting, biosynthesis, and chemicalreduction among others. Some of these materials are classified according toapplication such as materials for medical application, materials for industrialapplications, materials used in the oil industry and materials used likecoatings. The authors provide a comprehensive overview of structuralcharacterization techniques including scanning electron microscopy (SEM), X-raydiffraction (XRD), transmission electron microscopy (TEM), Raman spectroscopy, imageanalysis, finite element method (FEM), optical microscopy (OM), energy dispersive spectroscopy (EDS), Fourier transform infrared spectroscopy(FTIR), differential thermal analysis (DTA), differential scanning calorimetry(DSC), ultraviolet-visible spectroscopy (UV-Vis), infrared photo-thermalradiometry (IPTR), electrochemical impedance spectroscopy (EIS), thermogravimetryanalysis (TGA), thermo luminescence (TL), photoluminescence (PL), high resolutiontransmission electron microscopy (HRTEM), and radio frequency (RF). The bookincludes theoretical models and illustrations of characterization properties-bothstructural and chemical.…

Taschenbuch. Zustand: Neu. Characterization of Metals and Alloys | Ramiro Pérez Campos (u. a.) | Taschenbuch | xv | Englisch | 2018 | Springer | EAN 9783319810980 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu.…

Zustand: Hervorragend. Zustand: Hervorragend | Seiten: 272 | Sprache: Englisch | Produktart: Bücher | Thisbook covers various aspects of characterization of materials in the areas ofmetals, alloys, steels, welding, nanomaterials, intermetallic, and surfacecoatings. These materials are obtained by different methods and techniques likespray, mechanical milling, sol-gel, casting, biosynthesis, and chemicalreduction among others. Some of these materials are classified according toapplication such as materials for medical application, materials for industrialapplications, materials used in the oil industry and materials used likecoatings. The authors provide a comprehensive overview of structuralcharacterization techniques including scanning electron microscopy (SEM), X-raydiffraction (XRD), transmission electron microscopy (TEM), Raman spectroscopy, imageanalysis, finite element method (FEM), optical microscopy (OM), energy dispersive spectroscopy (EDS), Fourier transform infrared spectroscopy(FTIR), differential thermal analysis (DTA), differential scanning calorimetry(DSC), ultraviolet¿visible spectroscopy (UV-Vis), infrared photo-thermalradiometry (IPTR), electrochemical impedance spectroscopy (EIS), thermogravimetryanalysis (TGA), thermo luminescence (TL), photoluminescence (PL), high resolutiontransmission electron microscopy (HRTEM), and radio frequency (RF). The bookincludes theoretical models and illustrations of characterization properties¿bothstructural and chemical.…

Hardcover. Zustand: Brand New. 9.50x6.50x1.00 inches. In Stock.

Zustand: As New. Unread book in perfect condition.

Buch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - The XXIII International Materials Research Congress was held on August 17-21, 2014, in Cancún, Mexico. It was organized by the Sociedad Mexicana de Materiales (SMM). About 1,500 specialized scientists from more than 40 countries participated in the 30 different symposia, workshops, plenary lectures and tutorial courses. This special issue covers several aspects of the structural and chemical characterization of materials in the following areas: metals, alloys, steels, composites, polymeric compounds, welding, nanomaterials, and surface coatings, among others. They are amorphous, crystalline, powders, coatings, fibers, thin films, and so forth, which were prepared with different techniques. The structural characterization techniques include: scanning electron microscopy (SEM), X-ray diffraction (XRD), transmission electron microscopy (TEM), Raman spectroscopy, optical microscopy (OM), Fourier transform infrared spectroscopy (FTIR), differential thermal analysis (DTA), differential scanning calorimetry (DSC), thermogravimetry analysis (TGA), thermo luminescence (TL), laser emission, amongst others. Theoretical models from these properties are also included.…

Zustand: As New. Unread book in perfect condition.

Zustand: Used.

Zustand: Used.

Zustand: Buone. inglese Condizioni dell'esterno: Buone Condizioni dell'interno: Ottime.

paperback. Zustand: New. Paperback. Pub Date :2014-01-01 Publisher: Harbin Institute of Technology Press. Characterization of metals and alloys. is one of the original materials characterization series. The book is divided into 10 chapters. including: interface analysis and mechanical properties. chemical properties. mineral processing and metal recycling. smelting and casting. metal processing. coatings and films. fault analysis. This book is suitable as related areas of teaching. research. technical staff. and grad. …