Bearing technology (23 Ergebnisse)

Paperback. Zustand: Very Good. The book has been read, but is in excellent condition. Pages are intact and not marred by notes or highlighting. The spine remains undamaged.

Zustand: New. In English.

Zustand: New. pp. 118.

Paperback. Zustand: Brand New. 152 pages. 5.83x0.33x8.27 inches. In Stock.

Zustand: New. This is a Brand-new US Edition. This Item may be shipped from US or any other country as we have multiple locations worldwide.

Zustand: New. pp. 196.

Wraps. Zustand: Good. Second printing [stated]. vii, [1], 511, [1] pages. Wraps. Covers have some wear and soiling. Ex-library with usual library markings. Stamp and ink mark on front cover. Ink mark inside rear cover. The two authors were associated with the Lewis Research Center in Cleveland, Ohio. Chapter 5 on Gas-lubricated bearings was by J. A. Ausman and Chapter 7 on Liquid Lubricants was by Douglas H. Moreton. All other chapters were written by one or the other of the principal authors. Bisson retired from NASA in 1973 and was noted as the scientist who decades earlier had introduced Tribology to the National Advisory Committee on Aeronautics (the predecessor of NASA.) A bearing is a machine element that constrains relative motion to only the desired motion, and reduces friction between moving parts. The design of the bearing may, for example, provide for free linear movement of the moving part or for free rotation around a fixed axis; or, it may prevent a motion by controlling the vectors of normal forces that bear on the moving parts. Most bearings facilitate the desired motion by minimizing friction. Bearings are classified broadly according to the type of operation, the motions allowed, or to the directions of the loads (forces) applied to the parts. Rotary bearings hold rotating components such as shafts or axles within mechanical systems, and transfer axial and radial loads from the source of the load to the structure supporting it. The simplest form of bearing, the plain bearing, consists of a shaft rotating in a hole. Lubrication is often used to reduce friction. In the ball bearing and roller bearing, to prevent sliding friction, rolling elements such as rollers or balls with a circular cross-section are located between the races or journals of the bearing assembly. A wide variety of bearing designs exists to allow the demands of the application to be correctly met for maximum efficiency, reliability, durability and performance. The term "bearing" is derived from the verb "to bear"; a bearing being a machine element that allows one part to bear (i.e., to support) another. The simplest bearings are bearing surfaces, cut or formed into a part, with varying degrees of control over the form, size, roughness and location of the surface. Other bearings are separate devices installed into a machine or machine part. The most sophisticated bearings for the most demanding applications are very precise devices; their manufacture requires some of the highest standards of current technology. …

Zustand: New.

Wraps. Zustand: Good. Second printing [stated]. vii, [1], 511, [1] pages. Wraps. Covers have some wear and soiling. The two authors were associated with the Lewis Research Center in Cleveland, Ohio. Chapter 5 on Gas-lubricated bearings was by J. A. Ausman and Chapter 7 on Liquid Lubricants was by Douglas H. Moreton. All other chapters were written by one or the other of the principal authors. Bisson retired from NASA in 1973 and was noted as the scientist who decades earlier had introduced Tribology to the National Advisory Committee on Aeronautics (the predecessor of NASA). William J. Anderson was at one time the Chief of the Mechanical Technologies Branch At Lewis Research Center. A bearing is a machine element that constrains relative motion to only the desired motion, and reduces friction between moving parts. The design of the bearing may, for example, provide for free linear movement of the moving part or for free rotation around a fixed axis; or, it may prevent a motion by controlling the vectors of normal forces that bear on the moving parts. Most bearings facilitate the desired motion by minimizing friction. Bearings are classified broadly according to the type of operation, the motions allowed, or to the directions of the loads (forces) applied to the parts. Rotary bearings hold rotating components such as shafts or axles within mechanical systems, and transfer axial and radial loads from the source of the load to the structure supporting it. The simplest form of bearing, the plain bearing, consists of a shaft rotating in a hole. Lubrication is often used to reduce friction. In the ball bearing and roller bearing, to prevent sliding friction, rolling elements such as rollers or balls with a circular cross-section are located between the races or journals of the bearing assembly. A wide variety of bearing designs exists to allow the demands of the application to be correctly met for maximum efficiency, reliability, durability and performance. The term "bearing" is derived from the verb "to bear"; a bearing being a machine element that allows one part to bear (i.e., to support) another. The simplest bearings are bearing surfaces, cut or formed into a part, with varying degrees of control over the form, size, roughness and location of the surface. Other bearings are separate devices installed into a machine or machine part. The most sophisticated bearings for the most demanding applications are very precise devices; their manufacture requires some of the highest standards of current technology.…

Taschenbuch. Zustand: Neu. Treatment of Au-Cu refractory ores using SART Technology | Design of a 40 cbm/hr copper recovery plant for a gold mine with Au-Cu bearing refractory ores | Patrick Chesa | Taschenbuch | 132 S. | Englisch | 2016 | LAP LAMBERT Academic Publishing | EAN 9783659887413 | Verantwortliche Person für die EU: preigu GmbH & Co. KG, Lengericher Landstr. 19, 49078 Osnabrück, mail[at]preigu[dot]de | Anbieter: preigu.…

Paperback. Zustand: Brand New. 132 pages. 8.66x5.91x0.30 inches. In Stock.

Zustand: New. In English.

Zustand: New. Tedric A. Harris, Michael N. KotzalasFor the last four decades, Tedric Harris Rolling Bearing Analysis has been the bible for engineers involved in rolling bearing technology. Why do so many students and practicing engineers rely on this book? The.

Paperback. Zustand: Brand New. 5th revised edition. 368 pages. 10.00x7.01x0.83 inches. In Stock.

Zustand: Good. This is an ex-library book and may have the usual library/used-book markings inside.This book has hardback covers. In good all round condition. No dust jacket. Please note the Image in this listing is a stock photo and may not match the covers of the actual item,950grams, ISBN:9780849371837. …

Buch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - This book focuses on the tribology of marine sliding bearings. It extensively investigates the lubrication characteristics of two special forms of marine sliding bearings including journal-thrust coupled bearings for diesel engine crankshafts and double-layer oil film floating bushings for diesel engine fuel supply mechanisms. Building upon conventional theories of lubrication in sliding bearings, the book considers the unique operational conditions and structural features of these bearings. It creatively proposes respective lubrication mechanisms for each type of bearing, which are then experimentally validated.Furthermore, the book conducts comprehensive analyses of the lubrication performance of these bearings. The book is intended for undergraduate and graduate students who are interested in tribology and lubrication technology, researchers investigating lubrication model, and structure design engineers working on marine bearing.…

Zustand: New. In English.

Zustand: New. Harris, Tedric A. Kotzalas, Michael N.For the last four decades, Tedric Harris Rolling Bearing Analysis has been the bible for engineers involved in rolling bearing technology. Why do so many students and practicing engineers rely on this boo.

Zustand: New. Tedric A. Harris, Michael N. KotzalasFor the last four decades, Tedric Harris Rolling Bearing Analysis has been the bible for engineers involved in rolling bearing technology. Why do so many students and practicing engineers rely on this book? The.

Zustand: Good. Volume 4. Former library copy. Pages intact with minimal writing/highlighting. The binding may be loose and creased. Dust jackets/supplements are not included. Includes library markings. Stock photo provided. Product includes identifying sticker. Better World Books: Buy Books. Do Good.…

Zustand: Sehr gut. Zustand: Sehr gut | Seiten: 1152 | Sprache: Englisch | Produktart: Bücher | Keine Beschreibung verfügbar.

Hardcover. Zustand: Brand New. 5th hardback/cd-rom edition. 371 pages. 10.00x7.00x0.75 inches. In Stock.

9 x 6, hardcover, 533 pp, illustr, indices, 0803128940, ink ownership markings to rear end paper else clean, sound, near fine, issued without dust jacket. FIRST ED.