Advances mechanics design engineering (36 Ergebnisse)

Sprache: Englisch
Verlag: Cham, Springer., 2019
Serie: Buch 73 von 268 - Lecture Notes in Mechanical Engineering
- Hardcover
Anbieter: Universitätsbuchhandlung Herta Hold GmbH, Berlin, DeutschlandUniversitätsbuchhandlung Herta Hold GmbH
Verkäufer/-in kontaktierenVerkäufer/-in mit 3 SternenZustand: Gebraucht
EUR 20,00
EUR 30,00 VersandVersand von Deutschland nach USAAnzahl: 2 verfügbar
xviii, 824 p. Hardcover. Versand aus Deutschland / We dispatch from Germany via Air Mail. Einband bestoßen, daher Mängelexemplar gestempelt, sonst sehr guter Zustand. Imperfect copy due to slightly bumped cover, apart from this in very good condition. Stamped. Sprache: Englisch.

Sprache: Englisch
Verlag: Springer, 2021
Serie: Buch 204 von 268 - Lecture Notes in Mechanical Engineering
- Softcover
Anbieter: GreatBookPricesUK, Woodford Green, Vereinigtes KönigreichGreatBookPricesUK
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 49,34
EUR 17,98 VersandVersand von Vereinigtes Königreich nach USAAnzahl: Mehr als 20 verfügbar
Zustand: New.

Sprache: Englisch
Verlag: Springer, 2021
Serie: Buch 204 von 268 - Lecture Notes in Mechanical Engineering
- Softcover
Anbieter: Ria Christie Collections, Uxbridge, Vereinigtes KönigreichRia Christie Collections
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 55,16
EUR 15,38 VersandVersand von Vereinigtes Königreich nach USAAnzahl: Mehr als 20 verfügbar
Zustand: New. In English.

Sprache: Englisch
Verlag: Springer, 2021
Serie: Buch 204 von 268 - Lecture Notes in Mechanical Engineering
- Softcover
Anbieter: GreatBookPricesUK, Woodford Green, Vereinigtes KönigreichGreatBookPricesUK
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Gebraucht - Wie neu
EUR 55,04
EUR 17,98 VersandVersand von Vereinigtes Königreich nach USAAnzahl: Mehr als 20 verfügbar
Zustand: As New. Unread book in perfect condition.

Sprache: Englisch
Verlag: Springer, 2021
Serie: Buch 204 von 268 - Lecture Notes in Mechanical Engineering
- Softcover
Anbieter: AHA-BUCH GmbH, Einbeck, DeutschlandAHA-BUCH GmbH
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 52,78
EUR 35,00 VersandVersand von Deutschland nach USAAnzahl: 1 verfügbar
Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - This open access book gathers contributions presented at the International Joint Conference on Mechanics, Design Engineering and Advanced Manufacturing (JCM 2020), held as a web conference on June 2-4, 2020. It reports on cutting-edge topics in product design and manufacturing, such as industrial methods for integrated product and process design; innovative design; and computer-aided design. Further topics covered include virtual simulation and reverse engineering; additive manufacturing; product manufacturing; engineering methods in medicine and education; representation techniques; and nautical, aeronautics and aerospace design and modeling. The book is organized into four main parts, reflecting the focus and primary themes of the conference. The contributions presented here not only provide researchers, engineers and experts in a range of industrial engineering subfields with extensive information to support their daily work; they are also intended to stimulate new research directions, advanced applications of the methods discussed and future interdisciplinary collaborations.…

Sprache: Englisch
Verlag: Springer Nature, 2021
Serie: Buch 204 von 268 - Lecture Notes in Mechanical Engineering
- Softcover
Anbieter: Revaluation Books, Exeter, Vereinigtes KönigreichRevaluation Books
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 78,35
EUR 14,98 VersandVersand von Vereinigtes Königreich nach USAAnzahl: 2 verfügbar
Paperback. Zustand: Brand New. 460 pages. 9.25x6.10x1.08 inches. In Stock.

Sprache: Englisch
Verlag: Springer, 2021
Serie: Buch 204 von 268 - Lecture Notes in Mechanical Engineering
- Softcover
Anbieter: Home-set, Mannheim, DeutschlandHome-set
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 53,49
EUR 49,90 VersandVersand von Deutschland nach USAAnzahl: 2 verfügbar
Softcover/Taschenbuch. Zustand: Neu. This open access book gathers contributions presented at the International Joint Conference on Mechanics, Design Engineering and Advanced Manufacturing (JCM 2020), held as a web conference on June 2-4, 2020. It reports on cutting-edge topics in product design and manufacturing, such as industrial methods for integrated product and process design; innovative design; and computer-aided design. Further topics covered include virtual simulation and reverse engineering; additive manufacturing; product manufacturing; engineering methods in medicine and education; representation techniques; and nautical, aeronautics and aerospace design and modeling. The book is organized into four main parts, reflecting the focus and primary themes of the conference. The contributions presented here not only provide researchers, engineers and experts in a range of industrial engineering subfields with extensive information to support their daily work; they are also intended to stimulate new research directions, advanced applications of the methods discussed and future interdisciplinary collaborations. Sprache: Englisch Gewicht in Gramm: 692.…

Sprache: Englisch
Verlag: Springer Nature Switzerland AG, Cham, 2021
Serie: Buch 204 von 268 - Lecture Notes in Mechanical Engineering
- Softcover
- Erstausgabe
Anbieter: AussieBookSeller, Truganina, VIC, AustralienAussieBookSeller
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 74,75
EUR 33,56 VersandVersand von Australien nach USAAnzahl: 1 verfügbar
Paperback. Zustand: new. Paperback. This open access book gathers contributions presented at the International Joint Conference on Mechanics, Design Engineering and Advanced Manufacturing (JCM 2020), held as a web conference on June 24, 2020. It reports on cutting-edge topics in product design and manufacturing, such as industrial methods for integrated product and process design; innovative design; and computer-aided design. Further topics covered include virtual simulation and reverse engineering; additive manufacturing; product manufacturing; engineering methods in medicine and education; representation techniques; and nautical, aeronautics and aerospace design and modeling. The book is organized into four main parts, reflecting the focus and primary themes of the conference. The contributions presented here not only provide researchers, engineers and experts in a range of industrial engineering subfields with extensive information to support their daily work; they are also intended to stimulate new research directions, advanced applications of the methods discussed and future interdisciplinary collaborations. This open access book gathers contributions presented at the International Joint Conference on Mechanics, Design Engineering and Advanced Manufacturing (JCM 2020), held as a web conference on June 24, 2020. Shipping may be from our Sydney, NSW warehouse or from our UK or US warehouse, depending on stock availability.…
Weitere BilderSprache: Englisch
Verlag: Springer, 2021
Serie: Buch 204 von 268 - Lecture Notes in Mechanical Engineering
- Softcover
Anbieter: preigu, Osnabrück, Deutschlandpreigu
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 41,70
EUR 70,00 VersandVersand von Deutschland nach USAAnzahl: 5 verfügbar
Taschenbuch. Zustand: Neu. Advances on Mechanics, Design Engineering and Manufacturing III | Proceedings of the International Joint Conference on Mechanics, Design Engineering & Advanced Manufacturing, JCM 2020, June 2-4, 2020 | Lionel Roucoules (u. a.) | Taschenbuch | xvii | Englisch | 2021 | Springer | EAN 9783030705657 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu.…

Sprache: Englisch
Verlag: Springer, 2021
- Hardcover
Anbieter: StainesBookhub, Weybridge, SURRE, Vereinigtes KönigreichStainesBookhub
Verkäufer/-in kontaktierenVerkäufer/-in mit 2 SternenZustand: Neu
EUR 87,82
EUR 35,96 VersandVersand von Vereinigtes Königreich nach USAAnzahl: 1 verfügbar
Zustand: New. A brand new book in pristine condition. Showing zero signs of shelf wear, creases, or damage.

- Softcover
Anbieter: StainesBookhub, Weybridge, SURRE, Vereinigtes KönigreichStainesBookhub
Verkäufer/-in kontaktierenVerkäufer/-in mit 2 SternenZustand: Neu
EUR 102,52
EUR 35,96 VersandVersand von Vereinigtes Königreich nach USAAnzahl: 1 verfügbar
Zustand: New. A brand new book in pristine condition. Showing zero signs of shelf wear, creases, or damage.

Sprache: Englisch
Verlag: Palgrave Macmillan, 2021
Serie: Buch 204 von 268 - Lecture Notes in Mechanical Engineering
- Softcover
Anbieter: Buchpark, Trebbin, DeutschlandBuchpark
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Gebraucht
SonderangebotAktueller Preis: EUR 32,17
EUR 105,00 VersandVersand von Deutschland nach USAAnzahl: 2 verfügbar
Zustand: Hervorragend. Zustand: Hervorragend | Seiten: 460 | Sprache: Englisch | Produktart: Bücher | This open access book gathers contributions presented at the International Joint Conference on Mechanics, Design Engineering and Advanced Manufacturing (JCM 2020), held as a web conference on June 2¿4, 2020. It reports on cutting-edge topics in product design and manufacturing, such as industrial methods for integrated product and process design; innovative design; and computer-aided design. Further topics covered include virtual simulation and reverse engineering; additive manufacturing; product manufacturing; engineering methods in medicine and education; representation techniques; and nautical, aeronautics and aerospace design and modeling. The book is organized into four main parts, reflecting the focus and primary themes of the conference. The contributions presented here not only provide researchers, engineers and experts in a range of industrial engineering subfields with extensive information to support their daily work; they are also intended to stimulate new research directions, advanced applications of the methods discussed and future interdisciplinary collaborations.…

- Softcover
Anbieter: Buchpark, Trebbin, DeutschlandBuchpark
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Gebraucht - Gut
SonderangebotAktueller Preis: EUR 97,22
EUR 105,00 VersandVersand von Deutschland nach USAAnzahl: 1 verfügbar
Zustand: Gut. Zustand: Gut | Seiten: 1684 | Sprache: Englisch | Produktart: Bücher | This book gathers contributions presented at the International Joint Conference on Mechanics, Design Engineering and Advanced Manufacturing (JCM 2022), held on June 1¿3, 2022, in Ischia, Italy. It reports on cutting-edge topics in product design and manufacturing, such as industrial methods for integrated product and process design; innovative design; and computer-aided design. Further topics covered include virtual simulation and reverse engineering; additive manufacturing; product manufacturing; engineering methods in medicine and education; representation techniques; and collaborative and soft robotics. The book is organized into five main parts, reflecting the focus and primary themes of the conference. The contributions presented here not only provide researchers, engineers and experts in a range of industrial engineering subfields with extensive information to support their daily work; they are also intended to stimulate new research directions, advanced applications of the methods discussed and future interdisciplinary collaborations.…

Sprache: Englisch
Verlag: Springer, 2022
- Softcover
Anbieter: Ria Christie Collections, Uxbridge, Vereinigtes KönigreichRia Christie Collections
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 201,39
EUR 11,83 VersandVersand von Vereinigtes Königreich nach USAAnzahl: Mehr als 20 verfügbar
Zustand: New. In English.

- Softcover
Anbieter: Buchpark, Trebbin, DeutschlandBuchpark
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Gebraucht
SonderangebotAktueller Preis: EUR 103,63
EUR 105,00 VersandVersand von Deutschland nach USAAnzahl: 2 verfügbar
Zustand: Hervorragend. Zustand: Hervorragend | Seiten: 1684 | Sprache: Englisch | Produktart: Bücher | This book gathers contributions presented at the International Joint Conference on Mechanics, Design Engineering and Advanced Manufacturing (JCM 2022), held on June 1¿3, 2022, in Ischia, Italy. It reports on cutting-edge topics in product design and manufacturing, such as industrial methods for integrated product and process design; innovative design; and computer-aided design. Further topics covered include virtual simulation and reverse engineering; additive manufacturing; product manufacturing; engineering methods in medicine and education; representation techniques; and collaborative and soft robotics. The book is organized into five main parts, reflecting the focus and primary themes of the conference. The contributions presented here not only provide researchers, engineers and experts in a range of industrial engineering subfields with extensive information to support their daily work; they are also intended to stimulate new research directions, advanced applications of the methods discussed and future interdisciplinary collaborations.…

Sprache: Englisch
Verlag: Springer, 2021
- Hardcover
Anbieter: Ria Christie Collections, Uxbridge, Vereinigtes KönigreichRia Christie Collections
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 201,39
EUR 13,44 VersandVersand von Vereinigtes Königreich nach USAAnzahl: Mehr als 20 verfügbar
Zustand: New. In English.

Sprache: Englisch
Verlag: Springer, 2022
- Softcover
Anbieter: California Books, Miami, FL, USACalifornia Books
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 213,01
EUR 2,72 VersandVersand innerhalb von USAAnzahl: Mehr als 20 verfügbar
Zustand: New.

Sprache: Englisch
Verlag: Springer, 2021
- Hardcover
Anbieter: California Books, Miami, FL, USACalifornia Books
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 213,01
EUR 2,72 VersandVersand innerhalb von USAAnzahl: Mehr als 20 verfügbar
Zustand: New.
Weitere Bilder- Softcover
Anbieter: preigu, Osnabrück, Deutschlandpreigu
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 185,20
EUR 70,00 VersandVersand von Deutschland nach USAAnzahl: 5 verfügbar
Taschenbuch. Zustand: Neu. Advances on Mechanics, Design Engineering and Manufacturing II | Proceedings of the International Joint Conference on Mechanics, Design Engineering & Advanced Manufacturing (JCM 2018) | Francisco Cavas-Martínez (u. a.) | Taschenbuch | xviii | Englisch | 2020 | Springer | EAN 9783030123482 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu.…

Sprache: Englisch
Verlag: Springer, 2022
- Softcover
Anbieter: Revaluation Books, Exeter, Vereinigtes KönigreichRevaluation Books
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 258,69
EUR 11,99 VersandVersand von Vereinigtes Königreich nach USAAnzahl: 2 verfügbar
Paperback. Zustand: Brand New. 258 pages. 9.25x6.10x0.71 inches. In Stock.

- Hardcover
Anbieter: California Books, Miami, FL, USACalifornia Books
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 275,61
EUR 2,72 VersandVersand innerhalb von USAAnzahl: Mehr als 20 verfügbar
Zustand: New.

- Softcover
Anbieter: Ria Christie Collections, Uxbridge, Vereinigtes KönigreichRia Christie Collections
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 257,11
EUR 21,97 VersandVersand von Vereinigtes Königreich nach USAAnzahl: Mehr als 20 verfügbar
Zustand: New. In English.

Sprache: Englisch
Verlag: Springer, 2019
Serie: Buch 73 von 268 - Lecture Notes in Mechanical Engineering
- Hardcover
Anbieter: Ria Christie Collections, Uxbridge, Vereinigtes KönigreichRia Christie Collections
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 257,11
EUR 21,97 VersandVersand von Vereinigtes Königreich nach USAAnzahl: Mehr als 20 verfügbar
Zustand: New. In English.

- Softcover
Anbieter: AHA-BUCH GmbH, Einbeck, DeutschlandAHA-BUCH GmbH
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 242,59
EUR 43,77 VersandVersand von Deutschland nach USAAnzahl: 1 verfügbar
Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - This book contains the papers presented at the International Joint Conference on Mechanics, Design Engineering and Advanced Manufacturing (JCM 2018), held on 20-22 June 2018 in Cartagena, Spain. It reports on cutting-edge topics in product design and manufacturing, such as industrial methods for integrated product and process design; innovative design; and computer-aided design. Further topics covered include virtual simulation and reverse engineering; additive manufacturing; product manufacturing; engineering methods in medicine and education; representation techniques; and nautical, aeronautics and aerospace design and modeling. The book is divided into six main sections, reflecting the focus and primary themes of the conference. The contributions presented here will not only provide researchers, engineers and experts in a range of industrial engineering subfields with extensive information to support their daily work; they are also intended to stimulate new research directions, advanced applications of the methods discussed, and future interdisciplinary collaborations.…

Sprache: Englisch
Verlag: Springer, 2016
Serie: Buch 27 von 268 - Lecture Notes in Mechanical Engineering
- Softcover
Anbieter: AHA-BUCH GmbH, Einbeck, DeutschlandAHA-BUCH GmbH
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 242,59
EUR 48,53 VersandVersand von Deutschland nach USAAnzahl: 1 verfügbar
Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - This book gathers papers presented at the International Joint Conference on Mechanics, Design Engineering and Advanced Manufacturing (JCM 2016), held on 14-16 September, 2016, in Catania, Italy. It reports on cutting-edge topics in product design and manufacturing, such as industrial methods for integrated product and process design; innovative design; and computer-aided design. Further topics covered include virtual simulation and reverse engineering; additive manufacturing; product manufacturing; engineering methods in medicine and education; representation techniques; and nautical, aeronautics and aerospace design and modeling. The book is divided into eight main sections, reflecting the focus and primary themes of the conference. The contributions presented here will not only provide researchers, engineers and experts in a range of industrial engineering subfields with extensive information to support their daily work; they are also intended to stimulate new research directions, advanced applications of the methods discussed, and future interdisciplinary collaborations.…

- Softcover
Anbieter: AHA-BUCH GmbH, Einbeck, DeutschlandAHA-BUCH GmbH
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 242,59
EUR 52,49 VersandVersand von Deutschland nach USAAnzahl: 1 verfügbar
Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - This book gathers contributions presented at the International Joint Conference on Mechanics, Design Engineering and Advanced Manufacturing (JCM 2022), held on June 1-3, 2022, in Ischia, Italy. It reports on cutting-edge topics in product design and manufacturing, such as industrial methods for integrated product and process design; innovative design; and computer-aided design. Further topics covered include virtual simulation and reverse engineering; additive manufacturing; product manufacturing; engineering methods in medicine and education; representation techniques; and collaborative and soft robotics. The book is organized into five main parts, reflecting the focus and primary themes of the conference. The contributions presented here not only provide researchers, engineers and experts in a range of industrial engineering subfields with extensive information to support their daily work; they are also intended to stimulate new research directions, advanced applications of the methods discussed and future interdisciplinary collaborations.…

- Softcover
Anbieter: Home-set, Mannheim, DeutschlandHome-set
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 267,49
EUR 62,30 VersandVersand von Deutschland nach USAAnzahl: 2 verfügbar
Softcover/Taschenbuch. Zustand: Neu. This book contains the papers presented at the International Joint Conference on Mechanics, Design Engineering and Advanced Manufacturing (JCM 2018), held on 20-22 June 2018 in Cartagena, Spain. It reports on cutting-edge topics in product design and manufacturing, such as industrial methods for integrated product and process design; innovative design; and computer-aided design. Further topics covered include virtual simulation and reverse engineering; additive manufacturing; product manufacturing; engineering methods in medicine and education; representation techniques; and nautical, aeronautics and aerospace design and modeling. The book is divided into six main sections, reflecting the focus and primary themes of the conference. The contributions presented here will not only provide researchers, engineers and experts in a range of industrial engineering subfields with extensive information to support their daily work; they are also intended to stimulate new research directions, advanced applications of the methods discussed, and future interdisciplinary collaborations. Sprache: Englisch Gewicht in Gramm: 1253.…

- Softcover
Anbieter: AussieBookSeller, Truganina, VIC, AustralienAussieBookSeller
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 303,97
EUR 33,56 VersandVersand von Australien nach USAAnzahl: 1 verfügbar
Paperback. Zustand: new. Paperback. This book contains the papers presented at the International Joint Conference on Mechanics, Design Engineering and Advanced Manufacturing (JCM 2018), held on 20-22 June 2018 in Cartagena, Spain. It reports on cutting-edge topics in product design and manufacturing, such as industrial methods for integrated product and process design; innovative design; and computer-aided design. Further topics covered include virtual simulation and reverse engineering; additive manufacturing; product manufacturing; engineering methods in medicine and education; representation techniques; and nautical, aeronautics and aerospace design and modeling. The book is divided into six main sections, reflecting the focus and primary themes of the conference. The contributions presented here will not only provide researchers, engineers and experts in a range of industrial engineering subfields with extensive information to support their daily work; they are also intended to stimulate new research directions, advanced applications of the methods discussed, and future interdisciplinary collaborations. This book contains the papers presented at the International Joint Conference on Mechanics, Design Engineering and Advanced Manufacturing (JCM 2018), held on 20-22 June 2018 in Cartagena, Spain. It reports on cutting-edge topics in product design and manufacturing, such as industrial methods for integrated product and process design; Shipping may be from our Sydney, NSW warehouse or from our UK or US warehouse, depending on stock availability.…

Sprache: Englisch
Verlag: Palgrave Macmillan, 2019
Serie: Buch 73 von 268 - Lecture Notes in Mechanical Engineering
- Hardcover
Anbieter: Home-set, Mannheim, DeutschlandHome-set
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 267,49
EUR 63,39 VersandVersand von Deutschland nach USAAnzahl: 2 verfügbar
Gebundene Ausgabe. Zustand: Neu. This book contains the papers presented at the International Joint Conference on Mechanics, Design Engineering and Advanced Manufacturing (JCM 2018), held on 20-22 June 2018 in Cartagena, Spain. It reports on cutting-edge topics in product design and manufacturing, such as industrial methods for integrated product and process design; innovative design; and computer-aided design. Further topics covered include virtual simulation and reverse engineering; additive manufacturing; product manufacturing; engineering methods in medicine and education; representation techniques; and nautical, aeronautics and aerospace design and modeling. The book is divided into six main sections, reflecting the focus and primary themes of the conference. The contributions presented here will not only provide researchers, engineers and experts in a range of industrial engineering subfields with extensive information to support their daily work; they are also intended to stimulate new research directions, advanced applications of the methods discussed, and future interdisciplinary collaborations. Sprache: Englisch Gewicht in Gramm: 1363. …

- Softcover
Anbieter: Revaluation Books, Exeter, Vereinigtes KönigreichRevaluation Books
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 324,77
EUR 17,98 VersandVersand von Vereinigtes Königreich nach USAAnzahl: 2 verfügbar
Paperback. Zustand: Brand New. 844 pages. 9.25x6.10x1.81 inches. In Stock.