Gesamtpreis (1 Artikel Artikel):
Versandziel:
advances manufacturing (Mehr als 1.000 Ergebnisse)
Direkt zu den wichtigsten Suchergebnissen
Suchfilter
Produktart
- Alle Product Types
- Bücher (1.049)
- Magazine & Zeitschriften (Keine weiteren Ergebnisse entsprechen dieser Verfeinerung)
- Comics (Keine weiteren Ergebnisse entsprechen dieser Verfeinerung)
- Noten (Keine weiteren Ergebnisse entsprechen dieser Verfeinerung)
- Kunst, Grafik & Poster (Keine weiteren Ergebnisse entsprechen dieser Verfeinerung)
- Fotografien (Keine weiteren Ergebnisse entsprechen dieser Verfeinerung)
- Karten (Keine weiteren Ergebnisse entsprechen dieser Verfeinerung)
- Manuskripte & Papierantiquitäten (Keine weiteren Ergebnisse entsprechen dieser Verfeinerung)
Zustand Mehr dazu
Weitere Eigenschaften
- Erstausgabe (8)
- Signiert (Keine weiteren Ergebnisse entsprechen dieser Verfeinerung)
- Schutzumschlag (1)
- Angebotsfoto (357)
Sprache (3)
Gratisversand
Land des Verkäufers
Verkäuferbewertung
-
Advances in Large Scale Biopharmaceutical Manufacturing and Scale-Up Production, 2 Volume Set: Emerging Technologies and Scientific Advancements, Business, Capacity and Regulatory Issues
Sprache: Englisch
Verlag: Americal Society for Microbiology, 2004
ISBN 10: 0976060507 ISBN 13: 9780976060505
Anbieter: ThriftBooks-Atlanta, AUSTELL, GA, USA
Verkäuferbewertung 5 von 5 Sternen
Hardcover. Zustand: Very Good. No Jacket. May have limited writing in cover pages. Pages are unmarked. ~ ThriftBooks: Read More, Spend Less.
-
Advances in Manufacturing Technology 1986: National Conference Proceedings
Anbieter: BoundlessBookstore, Wallingford, Vereinigtes Königreich
Verkäuferbewertung 5 von 5 Sternen
EUR 3,56
EUR 8,05 Versand
Versand von Vereinigtes Königreich nach USAAnzahl: 1 verfügbar
In den WarenkorbZustand: Good. VG condition book with dust jacket. DJ is clean, has fresh colours and has little wear to edges. Book has clean and bright contents.
-
Sustainability in Smart Manufacturing (Advances in Manufacturing, Design and Computational Intelligence Techniques)
Anbieter: Books From California, Simi Valley, CA, USA
Verkäuferbewertung 4 von 5 Sternen
hardcover. Zustand: Fine.
-
Manufacturing Research. Organizational and Institutional Issues. Proceedings of the Conference on Manufacturing Research, Organizational and Institutional Issues, August 19-23, 1985, Stuttgart, West Germany. Advances in Industrial Engineering 5
Anbieter: Zubal-Books, Since 1961, Cleveland, OH, USA
Verkäuferbewertung 5 von 5 Sternen
Zustand: Good. 269 pp., hardcover, ex library, else text and binding clean and tight. - If you are reading this, this item is actually (physically) in our stock and ready for shipment once ordered. We are not bookjackers. Buyer is responsible for any additional duties, taxes, or fees required by recipient's country.
-
Advances in Factories of the Future, Cim and Robotics (Manufacturing Research & Technology)
Anbieter: Phatpocket Limited, Waltham Abbey, HERTS, Vereinigtes Königreich
Verkäuferbewertung 5 von 5 Sternen
EUR 3,86
EUR 12,27 Versand
Versand von Vereinigtes Königreich nach USAAnzahl: 1 verfügbar
In den WarenkorbZustand: Good. Your purchase helps support Sri Lankan Children's Charity 'The Rainbow Centre'. Ex-library, so some stamps and wear, but in good overall condition. Our donations to The Rainbow Centre have helped provide an education and a safe haven to hundreds of children who live in appalling conditions.
-
Advances in Food Engineering I (Food Engineering & Manufacturing)
Anbieter: ThriftBooks-Atlanta, AUSTELL, GA, USA
Verkäuferbewertung 5 von 5 Sternen
Hardcover. Zustand: Good. No Jacket. Former library book; Pages can have notes/highlighting. Spine may show signs of wear. ~ ThriftBooks: Read More, Spend Less.
-
Advances in Agile Manufacturing: Integrating Technology, Organization and People (Advances in Design & Manufacturing) (Volume 4)
Anbieter: Anybook.com, Lincoln, Vereinigtes Königreich
Verkäuferbewertung 5 von 5 Sternen
EUR 4,14
EUR 15,69 Versand
Versand von Vereinigtes Königreich nach USAAnzahl: 1 verfügbar
In den WarenkorbZustand: Fair. Volume 4. This is an ex-library book and may have the usual library/used-book markings inside.This book has hardback covers. In fair condition, suitable as a study copy. No dust jacket. Please note the Image in this listing is a stock photo and may not match the covers of the actual item,1450grams, ISBN:9051991762.
-
Advances in Manufacturing Engineering and Technology
Sprache: Englisch
Verlag: New Age International (P) Ltd., 2009
ISBN 10: 8122426743 ISBN 13: 9788122426748
Anbieter: Majestic Books, Hounslow, Vereinigtes Königreich
Verkäuferbewertung 4 von 5 Sternen
EUR 12,88
EUR 7,50 Versand
Versand von Vereinigtes Königreich nach USAAnzahl: 4 verfügbar
In den WarenkorbZustand: New. pp. 200.
-
Recent Advances in Control and Optimization of Manufacturing Systems
Sprache: Englisch
Verlag: Springer-Verlag Berlin and Heidelberg GmbH & Co. K, 1996
ISBN 10: 3540760555 ISBN 13: 9783540760559
SonderangebotEUR 5,55
EUR 16,50 Versand
Versand von Frankreich nach USAAnzahl: 1 verfügbar
In den WarenkorbSoftcover. Zustand: Très bon. Ancien livre de bibliothèque. Edition 1996. Ammareal reverse jusqu'à 15% du prix net de cet article à des organisations caritatives. ENGLISH DESCRIPTION Book Condition: Used, Very good. Former library book. Edition 1996. Ammareal gives back up to 15% of this item's net price to charity organizations.
-
Beating the Competition at Our Own Game TechnologyBased Advances in Manufacturing Hearing Before the Subcommittee on Investigations and Oversight of Representatives One Hundred Third Congre
Anbieter: PBShop.store US, Wood Dale, IL, USA
Verkäuferbewertung 5 von 5 Sternen
PAP. Zustand: New. New Book. Shipped from UK. Established seller since 2000.
-
Beating the Competition at Our Own Game TechnologyBased Advances in Manufacturing Hearing Before the Subcommittee on Investigations and Oversight O
Anbieter: PBShop.store US, Wood Dale, IL, USA
Verkäuferbewertung 5 von 5 Sternen
PAP. Zustand: New. New Book. Shipped from UK. Established seller since 2000.
-
Recent Advances in Integrated Design and Manufacturing in Mechanical Engineering
Anbieter: Anybook.com, Lincoln, Vereinigtes Königreich
Verkäuferbewertung 5 von 5 Sternen
EUR 9,88
EUR 15,69 Versand
Versand von Vereinigtes Königreich nach USAAnzahl: 1 verfügbar
In den WarenkorbZustand: Fair. This is an ex-library book and may have the usual library/used-book markings inside.This book has hardback covers. In fair condition, suitable as a study copy. No dust jacket. Please note the Image in this listing is a stock photo and may not match the covers of the actual item,1200grams, ISBN:9781402011634.
-
Control and Dynamic Systems. Advances in Theory and Applications. Volume 48: Manufacturing and Automation Systems: Techniques and Technologies, Part 4 of 5
Anbieter: Zubal-Books, Since 1961, Cleveland, OH, USA
Verkäuferbewertung 5 von 5 Sternen
Zustand: Very Good. 447 pp., hardcover, minor library markings, else text clean & binding tight. - If you are reading this, this item is actually (physically) in our stock and ready for shipment once ordered. We are not bookjackers. Buyer is responsible for any additional duties, taxes, or fees required by recipient's country.
-
Beating the Competition at Our Own Game TechnologyBased Advances in Manufacturing Hearing Before the Subcommittee on Investigations and Oversight of Representatives One Hundred Third Congre
Anbieter: PBShop.store UK, Fairford, GLOS, Vereinigtes Königreich
Verkäuferbewertung 5 von 5 Sternen
EUR 22,16
EUR 4,80 Versand
Versand von Vereinigtes Königreich nach USAAnzahl: 15 verfügbar
In den WarenkorbPAP. Zustand: New. New Book. Shipped from UK. Established seller since 2000.
-
Globlization of Manufacturing in the Digital Communications Era (IFIP Advances in Information and Communication Technology)
Buch 15 von 292: IFIP Advances in Information and Communication TechnologyAnbieter: Librairie Thé à la page, Montélimar, Frankreich
Verkäuferbewertung 5 von 5 Sternen
Couverture rigide. Zustand: Bon. Springer, 1998. 1 volume relié(s) format In-8 bon tranche du 4e plat écrasée par endroits.
-
Scientific Foundations of Space Manufacturing. Advances in Science and Technology in the USSR Technology Series.
Verlag: MIR Publishers
Anbieter: Wonder Book, Frederick, MD, USA
Verkäuferbewertung 5 von 5 Sternen
Zustand: Very Good. Very Good condition. Paperback edition. (Space, Technology, Manufacturing) A copy that may have a few cosmetic defects. May also contain light spine creasing or a few markings such as an owner's name, short gifter's inscription or light stamp.
-
Beating the Competition at Our Own Game TechnologyBased Advances in Manufacturing Hearing Before the Subcommittee on Investigations and Oversight O
Anbieter: PBShop.store UK, Fairford, GLOS, Vereinigtes Königreich
Verkäuferbewertung 5 von 5 Sternen
EUR 16,59
EUR 4,80 Versand
Versand von Vereinigtes Königreich nach USAAnzahl: 15 verfügbar
In den WarenkorbPAP. Zustand: New. New Book. Shipped from UK. Established seller since 2000.
-
Beating the Competition at Our Own Game: Technology-Based Advances in Manufacturing. Hearing, July 7, 1994
Anbieter: Ground Zero Books, Ltd., Silver Spring, MD, USA
Verkäuferbewertung 5 von 5 Sternen
Zustand: very good. 24 cm, 141, wraps, illus.
-
Advances in Soft Computing: Engineering Design and Manufacturing
Anbieter: Anybook.com, Lincoln, Vereinigtes Königreich
Verkäuferbewertung 5 von 5 Sternen
EUR 14,16
EUR 15,69 Versand
Versand von Vereinigtes Königreich nach USAAnzahl: 1 verfügbar
In den WarenkorbZustand: Good. This is an ex-library book and may have the usual library/used-book markings inside.This book has hardback covers. Clean from markings. In good all round condition. No dust jacket. Please note the Image in this listing is a stock photo and may not match the covers of the actual item,750grams, ISBN:9781852337551.
-
Aerospace & Defense Technology, December 2014; The Engineer's Guide to Design & Manufacturing Advances
Verlag: Tech Briefs Media Group, an SAE International Company, New York, 2014
Anbieter: Ground Zero Books, Ltd., Silver Spring, MD, USA
Verkäuferbewertung 5 von 5 Sternen
Erstausgabe
Magazine. Zustand: Very good. 44 pages. Illustrations (many in color). This is a Supplement to NASA Tech Briefs. Aerospace & Defense Technology magazine was the evolution of two great publications - Aerospace Engineering and Defense Tech Briefs - coming together as one to cover the latest advances in military and commercial aerospace from the DoD, NASA, and major industry leaders. Aerospace & Defense Technology is one of the largest-circulation engineering magazines for the military and aerospace market, serving over 100,000 design engineers and managers worldwide. Presumed First Edition, First printing thus.
-
Beating the Competition at Our Own Game TechnologyBased Advances in Manufacturing Hearing Before the Subcommittee on Investigations and Oversight of Representatives One Hundred Third Congre
Anbieter: PBShop.store US, Wood Dale, IL, USA
Verkäuferbewertung 5 von 5 Sternen
HRD. Zustand: New. New Book. Shipped from UK. Established seller since 2000.
-
Softcover. Zustand: As New. Leichte Kratzer / Abnutzungen / Druckstellen. Advances in Additive Manufacturing: Artificial intelligence, Nature Inspired and Bio-manufacturing covers the latest developments in additive manufacturing. The book explores nature-inspired additive manufactured processes and their applications, as well as various algorithms to enhance characteristics, efficiency and the development of a product in minimum time. The integration of AM with artificial intelligence (AI) from prefabrication stage to final product, with real-time defect detection, control and process efficiency improvement are also discussed. This book will be a great resource for engineers, researchers and academics involved in this revolutionary and unique field of manufacturing. Discusses the modeling of additive manufacturing processes using artificial intelligence Looks at the optimization of designs, technologies and materials of AM and the use of simulation in AM Includes case studies and real-world problems from today's industries and society.
-
Beating the Competition at Our Own Game TechnologyBased Advances in Manufacturing Hearing Before the Subcommittee on Investigations and Oversight of Representatives One Hundred Third Congre
Anbieter: PBShop.store UK, Fairford, GLOS, Vereinigtes Königreich
Verkäuferbewertung 5 von 5 Sternen
EUR 27,99
EUR 4,80 Versand
Versand von Vereinigtes Königreich nach USAAnzahl: 15 verfügbar
In den WarenkorbHRD. Zustand: New. New Book. Shipped from UK. Established seller since 2000.
-
Advances in semiconductor technologies (Metallurgy, Mining and Steel Manufacturing)
Buch 2 von 4: Metallurgy, Mining and Steel ManufacturingAnbieter: Ria Christie Collections, Uxbridge, Vereinigtes Königreich
Verkäuferbewertung 5 von 5 Sternen
EUR 19,93
EUR 13,82 Versand
Versand von Vereinigtes Königreich nach USAAnzahl: Mehr als 20 verfügbar
In den WarenkorbZustand: New. In.
-
Software Engineering for Manufacturing Systems: Methods and CASE tools (IFIP Advances in Information and Communication Technology)
Verlag: Springer, 1996
ISBN 10: 027361598X ISBN 13: 9780273615989
Anbieter: WeBuyBooks, Rossendale, LANCS, Vereinigtes Königreich
Verkäuferbewertung 5 von 5 Sternen
EUR 4,13
EUR 8,53 Versand
Versand von Vereinigtes Königreich nach USAAnzahl: 1 verfügbar
In den WarenkorbZustand: Good. Most items will be dispatched the same or the next working day. A copy that has been read but remains in clean condition. All of the pages are intact and the cover is intact and the spine may show signs of wear. The book may have minor markings which are not specifically mentioned. Ex library copy with usual stamps & stickers.
-
Software Engineering for Manufacturing Systems: Methods and CASE tools (IFIP Advances in Information and Communication Technology)
Verlag: Springer, 1996
ISBN 10: 027361598X ISBN 13: 9780273615989
Anbieter: WeBuyBooks, Rossendale, LANCS, Vereinigtes Königreich
Verkäuferbewertung 5 von 5 Sternen
EUR 4,13
EUR 8,53 Versand
Versand von Vereinigtes Königreich nach USAAnzahl: 1 verfügbar
In den WarenkorbZustand: Like New. Most items will be dispatched the same or the next working day. An apparently unread copy in perfect condition. Dust cover is intact with no nicks or tears. Spine has no signs of creasing. Pages are clean and not marred by notes or folds of any kind.
-
Software Engineering for Manufacturing Systems: Methods and CASE tools (IFIP Advances in Information and Communication Technology)
Verlag: Springer, 1996
ISBN 10: 027361598X ISBN 13: 9780273615989
Anbieter: WeBuyBooks, Rossendale, LANCS, Vereinigtes Königreich
Verkäuferbewertung 5 von 5 Sternen
EUR 4,13
EUR 8,53 Versand
Versand von Vereinigtes Königreich nach USAAnzahl: 1 verfügbar
In den WarenkorbZustand: Very Good. Most items will be dispatched the same or the next working day. A copy that has been read, but is in excellent condition. Pages are intact and not marred by notes or highlighting. The spine remains undamaged.
-
Some recent advances in tinplate manufacturing processes: An address given at the Congresso Imballaggi,Parma,Italy 1954
Verlag: Tin Research Institute
Anbieter: Kennys Bookstore, Olney, MD, USA
Verkäuferbewertung 5 von 5 Sternen
Zustand: Good. 1955. First Edition. Paperback. 27 p. illus. 25 cm. Pamphlet. A good copy. Small inscription to the top right of the cover. Not a first edition copy. . . . Books ship from the US and Ireland.
-
Some recent Advances in Tinplate Manufacturing Processes
Verlag: Tin Research Institute / Greenford, 1955
Anbieter: Akademische Buchhandlung Antiquariat, Freiberg, Deutschland
Verbandsmitglied: BOEV
Verkäuferbewertung 5 von 5 Sternen
Erstausgabe
Softcover. Zustand: Gut bis sehr gut. 1. Auflage. 27 S., OBroschur , Umschlag etwas unsauber und lichtrandig , Bibex., typisch gestempelt und mit Registernummern versehen , sonat sauber , stabli und komplett.
-
![Bild des Verkäufers für Advances in manufacturing technology XII [12]: proceedings of the fourteenth National Conference on Manufacturing Research, University of Derby, UK, 7 - 9 September 1998 zum Verkauf von Aucott & Thomas](https://pictures.abebooks.com/inventory/md/md10553575821.jpg)
Advances in manufacturing technology XII [12]: proceedings of the fourteenth National Conference on Manufacturing Research, University of Derby, UK, 7 - 9 September 1998
Verlag: Professional Engineering Publishing, Bury St. Edmunds, 1998
ISBN 10: 1860581722 ISBN 13: 9781860581724
Anbieter: Aucott & Thomas, Ibstock, Vereinigtes Königreich
Verkäuferbewertung 5 von 5 Sternen
Erstausgabe
EUR 9,98
EUR 17,30 Versand
Versand von Vereinigtes Königreich nach USAAnzahl: 1 verfügbar
In den WarenkorbHardcover. Zustand: Fine. First Edition. Very clean, tightly bound book with no inscriptions, in glossy pictorial boards, issued without a dustjacket. As new, no signs of use. xx + 792 pages, figures in the text, references, index. Heavy book so additional postage may be requested.
