advances condition monitoring machinery (14 Ergebnisse)

xiii, 709 p. Softcover. Versand aus Deutschland / We dispatch from Germany via Air Mail. Einband bestoßen, daher Mängelexemplar gestempelt, sonst sehr guter Zustand. Imperfect copy due to slightly bumped cover, apart from this in very good condition. Stamped. Sprache: Englisch.

x, 373 p. Hardcover. Versand aus Deutschland / We dispatch from Germany via Air Mail. Einband bestoßen, daher Mängelexemplar gestempelt, sonst sehr guter Zustand. Imperfect copy due to slightly bumped cover, apart from this in very good condition. Stamped. Sprache: Englisch.

Zustand: very good. Gut/Very good: Buch bzw. Schutzumschlag mit wenigen Gebrauchsspuren an Einband, Schutzumschlag oder Seiten. / Describes a book or dust jacket that does show some signs of wear on either the binding, dust jacket or pages.

Zustand: New. In.

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - This book presents the processing of the third edition of the Condition Monitoring of Machinery in Non-Stationary Operations (CMMNO13), which was held in Ferrara, Italy. This yearly event merges an international community of researchers who met - in 2011 in Wroclaw (Poland) and in 2012 in Hammamet (Tunisia) - to discuss issues of diagnostics of rotating machines operating in complex motion and/or load conditions. The growing interest of the industrial world on the topics covered by the CMMNO13 involves the fields of packaging, automotive, agricultural, mining, processing and wind machines in addition to that of the systems for data acquisition. The participation of speakers and visitors from industry makes the event an opportunity for immediate assessment of the potential applications of advanced methodologies for the signal analysis. Signals acquired from machines often contain contributions from several different components as well as noise. Therefore, the major challenge of condition monitoring is to point out the signal content that is related to the state of the monitored component particularly in non-stationary conditions.

Zustand: New. In.

Zustand: New. In.

Zustand: New. In.

Zustand: New. In.

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - This book provides readers with a snapshot of recent methods for non-stationary vibration analysis of machinery. It covers a broad range of advanced techniques in condition monitoring of machinery, such as mathematical models, signal processing and pattern recognition methods and artificial intelligence methods, and their practical applications to the analysis of nonstationarities. Each chapter, accepted after a rigorous peer-review process, reports on a selected, original piece of work presented and discussed at the International Conference on Condition Monitoring of Machinery in Non-Stationary Operations, CMMNO'2016, held on September 12 - 16, 2016, in Gliwice, Poland. The contributions cover advances in both theory and practice in a variety of subfields, such as: smart materials and structures; fluid-structure interaction; structural acoustics as well as computational vibro-acoustics and numerical methods. Further topics include: engines control, noise identification, robust design, flow-induced vibration and many others. By presenting state-of-the-art in predictive maintenance solutions and discussing important industrial issues the book offers a valuable resource to both academics and professionals and is expected to facilitate communication and collaboration between the two groups.

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - The book provides readers with a snapshot of recent research and technological trends in the field of condition monitoring of machinery working under a broad range of operating conditions. Each chapter, accepted after a rigorous peer-review process, reports on an original piece of work presented and discussed at the 4th International Conference on Condition Monitoring of Machinery in Non-stationary Operations, CMMNO 2014, held on December 15-16, 2014, in Lyon, France. The contributions have been grouped into three different sections according to the main subfield (signal processing, data mining or condition monitoring techniques) they are related to. The book includes both theoretical developments as well as a number of industrial case studies, in different areas including, but not limited to: noise and vibration; vibro-acoustic diagnosis; signal processing techniques; diagnostic data analysis; instantaneous speed identification; monitoring and diagnostic systems; and dynamic and fault modeling. This book not only provides a valuable resource for both academics and professionals in the field of condition monitoring, it also aims at facilitating communication and collaboration between the two groups.

Buch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - The book provides readers with a snapshot of recent research and technological trends in the field of condition monitoring of machinery working under a broad range of operating conditions. Each chapter, accepted after a rigorous peer-review process, reports on an original piece of work presented and discussed at the 4th International Conference on Condition Monitoring of Machinery in Non-stationary Operations, CMMNO 2014, held on December 15-16, 2014, in Lyon, France. The contributions have been grouped into three different sections according to the main subfield (signal processing, data mining or condition monitoring techniques) they are related to. The book includes both theoretical developments as well as a number of industrial case studies, in different areas including, but not limited to: noise and vibration; vibro-acoustic diagnosis; signal processing techniques; diagnostic data analysis; instantaneous speed identification; monitoring and diagnostic systems; and dynamic and fault modeling. This book not only provides a valuable resource for both academics and professionals in the field of condition monitoring, it also aims at facilitating communication and collaboration between the two groups.

Buch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - This book provides readers with a snapshot of recent methods for non-stationary vibration analysis of machinery. It covers a broad range of advanced techniques in condition monitoring of machinery, such as mathematical models, signal processing and pattern recognition methods and artificial intelligence methods, and their practical applications to the analysis of nonstationarities. Each chapter, accepted after a rigorous peer-review process, reports on a selected, original piece of work presented and discussed at the International Conference on Condition Monitoring of Machinery in Non-Stationary Operations, CMMNO'2016, held on September 12 - 16, 2016, in Gliwice, Poland. The contributions cover advances in both theory and practice in a variety of subfields, such as: smart materials and structures; fluid-structure interaction; structural acoustics as well as computational vibro-acoustics and numerical methods. Further topics include: engines control, noise identification, robust design, flow-induced vibration and many others. By presenting state-of-the-art in predictive maintenance solutions and discussing important industrial issues the book offers a valuable resource to both academics and professionals and is expected to facilitate communication and collaboration between the two groups.

Buch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - This book is aimed at researchers, industry professionals and students interested in the broad ranges of disciplines related to condition monitoring of machinery working in non-stationary conditions. Each chapter, accepted after a rigorous peer-review process, reports on a selected, original piece of work presented and discussed at the International Conference on Condition Monitoring of Machinery in Non-stationary Operations, CMMNO'2018, held on June 20 - 22, 2018, in Santander, Spain. The book describes both theoretical developments and a number of industrial case studies, which cover different topics, such as: noise and vibrations in machinery, conditioning monitoring in non-stationary operations, vibro-acoustic diagnosis of machinery, signal processing, application of pattern recognition and data mining, monitoring and diagnostic systems, faults detection, dynamics of structures and machinery, and mechatronic machinery diagnostics.