advanced manufacturing processes selected (29 Ergebnisse)

XIX, 629 p. Softcover. Einband bestoßen, daher Mängelexemplar gestempelt, sonst sehr guter Zustand. Imperfect copy due to slightly bumped cover, apart from this in very good condition. Stamped. Lecture Notes in Mechanical Engineering. Sprache: Englisch.

Zustand: New. In.

Zustand: Hervorragend. Zustand: Hervorragend | Sprache: Englisch | Produktart: Bücher.

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - This book offers a timely yet comprehensive snapshot of innovative research and developments in the area of manufacturing. It covers a wide range of manufacturing processes, such as cutting, coatings, and grinding, highlighting the advantages provided by the use of new materials and composites, as well as new methods and technologies. It discusses topics in energy generation and pollution prevention. It shows how computational methods and mathematical models have been applied to solve a number of issues in both theoretical and applied research. Based on selected papers presented at the Grabchenko's International Conference on Advanced Manufacturing Processes (InterPartner-2019), held in Odessa, Ukraine on September 10-13, 2019, this book offers a timely overview and extensive information on trends and technologies in the area of manufacturing, mechanical and materials engineering. It is also intended to facilitate communication and collaboration between different groups working on similar topics, and to offer a bridge between academic and industrial researchers.

Zustand: New. In.

Zustand: New. In.

Zustand: New. In.

hardcover. Zustand: Good. cover warped minor wear and creasing.

Paperback. Zustand: Brand New. 652 pages. 9.25x6.10x1.31 inches. In Stock.

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - This book offers a timely snapshot of innovative research and developments at the interface between manufacturing, materials and mechanical engineering, and quality assurance. It covers various manufacturing processes, such as grinding, boring, milling, broaching, coatings, including additive manufacturing. It focuses on cutting, abrasive, stamping-drawing processes, shot peening, and complex treatment. It describes temperature distribution, twisting deformation, defect formation process, failure analysis, as well as the convective heat exchange and non-uniform nanocapillary fluid cooling, highlighting the growing role of quality control, integrated management systems, and economic efficiency evaluation. It also covers vibration damping, dynamic behavior, failure probability, and strength performance methods for aviation, heterogeneous, permeable porous, and other types of materials. Gathering the best papers presented at the 4th Grabchenko's International Conference on Advanced Manufacturing Processes (InterPartner-2022), held in Odessa, Ukraine, on September 6-9, 2022, this book offers a timely overview and extensive information on trends and technologies in manufacturing, mechanical, and materials engineering, and quality assurance. It is also intended to facilitate communication and collaboration between different groups working on similar topics and to offer a bridge between academic and industrial researchers.

Buch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - This book offers a timely snapshot of innovative research and developments at the interface between manufacturing, materials and mechanical engineering, and quality assurance. It covers various manufacturing processes, such as grinding, boring, milling, broaching, coatings, including additive manufacturing. It focuses on cutting, abrasive, stamping-drawing processes, shot peening, and complex treatment. It describes temperature distribution, twisting deformation, defect formation process, failure analysis, as well as the convective heat exchange and non-uniform nanocapillary fluid cooling, highlighting the growing role of quality control, integrated management systems, and economic efficiency evaluation. It also covers vibration damping, dynamic behavior, failure probability, and strength performance methods for aviation, heterogeneous, permeable porous, and other types of materials. Gathering the best papers presented at the 4th Grabchenko's International Conference on Advanced Manufacturing Processes (InterPartner-2022), held in Odessa, Ukraine, on September 6-9, 2022, this book offers a timely overview and extensive information on trends and technologies in manufacturing, mechanical, and materials engineering, and quality assurance. It is also intended to facilitate communication and collaboration between different groups working on similar topics and to offer a bridge between academic and industrial researchers.

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - This book offers a timely yet comprehensive snapshot of innovative research and developments at the interface between manufacturing, materials and mechanical engineering, and quality assurance. It covers a wide range of manufacturing processes, such as cutting, grinding, assembly, and coatings, including ultrasonic treatment, molding, radial-isostatic compression, ionic-plasma deposition, volumetric vibration treatment, and wear resistance. It also highlights the advantages of augmented reality, RFID technology, reverse engineering, optimization, heat and mass transfer, energy management, quality inspection, and environmental impact. Based on selected papers presented at the Grabchenko's International Conference on Advanced Manufacturing Processes (InterPartner-2020), held in Odessa, Ukraine, on September 8-11, 2020, this book offers a timely overview and extensive information on trends and technologies in production planning, design engineering, advanced materials, machining processes, process engineering, and quality assurance. It is also intended to facilitate communication and collaboration between different groups working on similar topics and offer a bridge between academic and industrial researchers.

Zustand: Hervorragend. Zustand: Hervorragend | Sprache: Englisch | Produktart: Bücher.

Zustand: New. In.

Zustand: New. In.

Zustand: Sehr gut. Zustand: Sehr gut | Sprache: Englisch | Produktart: Bücher.

Paperback. Zustand: Brand New. 615 pages. 9.25x6.10x1.24 inches. In Stock.

Hardcover. Zustand: Brand New. 615 pages. 9.25x6.10x1.31 inches. In Stock.

Paperback. Zustand: Brand New. 880 pages. 9.25x6.10x1.74 inches. In Stock.

Zustand: New. In English.

Zustand: New.

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - This book offers a timely snapshot of innovative research and developments at the interface between manufacturing, materials and mechanical engineering, and quality assurance. It covers a wide range of manufacturing processes, such as grinding, boring, milling, turning, woodworking, coatings, including additive manufacturing. It focuses on laser, ultrasonic, and combined laser-ultrasonic hardening treatments, and dispersion hardening. It describes tribology and functional analysis of coatings, separation, purification and filtration processes, as well as ecological recirculation and electrohydraulic activation, highlighting the growing role of digital twins, optimization and lifecycle management methods, and quality inspection processes. It also covers cutting-edge heat and mass transfer technologies and energy management methods. Gathering the best papers presented at the 3rd Grabchenko's International Conference on Advanced Manufacturing Processes (InterPartner-2021), held in Odessa, Ukraine, on September 7-10, 2021, this book offers a timely overview and extensive information on trends and technologies in manufacturing, mechanical, and materials engineering, and quality assurance. It is also intended to facilitate communication and collaboration between different groups working on similar topics and to offer a bridge between academic and industrial researchers.

Buch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - This book offers a timely snapshot of innovative research and developments at the interface between manufacturing, materials and mechanical engineering, and quality assurance. It covers a wide range of manufacturing processes, such as grinding, boring, milling, turning, woodworking, coatings, including additive manufacturing. It focuses on laser, ultrasonic, and combined laser-ultrasonic hardening treatments, and dispersion hardening. It describes tribology and functional analysis of coatings, separation, purification and filtration processes, as well as ecological recirculation and electrohydraulic activation, highlighting the growing role of digital twins, optimization and lifecycle management methods, and quality inspection processes. It also covers cutting-edge heat and mass transfer technologies and energy management methods. Gathering the best papers presented at the 3rd Grabchenko's International Conference on Advanced Manufacturing Processes (InterPartner-2021), held in Odessa, Ukraine, on September 7-10, 2021, this book offers a timely overview and extensive information on trends and technologies in manufacturing, mechanical, and materials engineering, and quality assurance. It is also intended to facilitate communication and collaboration between different groups working on similar topics and to offer a bridge between academic and industrial researchers.

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - This book offers a timely snapshot of innovative research and developments at the interface between design, manufacturing, materials, mechanical and process engineering, and quality assurance. It covers various manufacturing processes, such as grinding, milling, broaching, and gear machining, including additive manufacturing, vibrational-centrifugal strengthening, laser-ultrasonic surface hardening, and antifriction coatings. It focuses on computer and numerical simulation, mathematical and integrated process modeling, parametric synthesis, virtual prototyping, automatic control, design of manufacturing, mechanical and mechatronics systems. It describes innovative cutting and abrasive processes and combined technologies. It also covers the formation, strengthening, and thermomechanical rolling. It also investigates the temperature field behavior, thermal stability, wear resistance, and other processes of various materials. Gathering the best papers presented at the 5th Grabchenko'sInternational Conference on Advanced Manufacturing Processes (InterPartner-2023), held on September 5-8, 2023, in Odessa, Ukraine,this book provides a comprehensive and up-to-date examination of design, manufacturing, mechanical, materials, and process engineering, as well as quality assurance trends and technologies. Yet, it also aims at fostering international and interdisciplinary communication and collaborations, offering a bridge between the academic and industrial sector.

Buch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - This book offers a timely snapshot of innovative research and developments at the interface between design, manufacturing, materials, mechanical and process engineering, and quality assurance. It covers various manufacturing processes, such as grinding, milling, broaching, and gear machining, including additive manufacturing, vibrational-centrifugal strengthening, laser-ultrasonic surface hardening, and antifriction coatings. It focuses on computer and numerical simulation, mathematical and integrated process modeling, parametric synthesis, virtual prototyping, automatic control, design of manufacturing, mechanical and mechatronics systems. It describes innovative cutting and abrasive processes and combined technologies. It also covers the formation, strengthening, and thermomechanical rolling. It also investigates the temperature field behavior, thermal stability, wear resistance, and other processes of various materials. Gathering the best papers presented at the 5th Grabchenko'sInternational Conference on Advanced Manufacturing Processes (InterPartner-2023), held on September 5-8, 2023, in Odessa, Ukraine,this book provides a comprehensive and up-to-date examination of design, manufacturing, mechanical, materials, and process engineering, as well as quality assurance trends and technologies. Yet, it also aims at fostering international and interdisciplinary communication and collaborations, offering a bridge between the academic and industrial sector.

Buch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - This book offers a timely snapshot of innovative research and developments at the interface between design, manufacturing, materials, mechanical and process engineering, and quality assurance. It covers various manufacturing processes, such as grinding, turning, drilling, milling, broaching, and gear machining, including additive manufacturing, strengthening, electro-mechanical processing, vacuum technology, and deforming broaching. It focuses on computer and numerical simulation, mathematical and reliability modeling, and machine learning models for manufacturing systems and processes. It describes innovative cutting and abrasive processes and combined technologies. It also investigates the electrical resistance, self-sharping effect, strengthening, heat treatment, surface peening, and heat resistance of various coatings and materials. Gathering the best papers presented at the 6th Grabchenko's International Conference on Advanced Manufacturing Processes (InterPartner-2024), held in Odesa, Ukraine, on September 10-13, 2024, this book provides a comprehensive and up-to-date examination of design, manufacturing, mechanical, materials, and process engineering, as well as quality assurance trends and technologies. It also aims to foster international and interdisciplinary communication and collaborations, offering a bridge between the academic and industrial sectors.

Paperback. Zustand: Brand New. 740 pages. 9.25x6.10x1.65 inches. In Stock.

Hardcover. Zustand: Brand New. 601 pages. 9.25x6.10x1.57 inches. In Stock.

Hardcover. Zustand: Brand New. 871 pages. 9.25x6.10x9.25 inches. In Stock.