Gesamtpreis (1 Artikel Artikel):
Versandziel:
Manufacturing Engineering and Materials Processing (132 Ergebnisse)
Direkt zu den wichtigsten Suchergebnissen
Suchfilter
Produktart
- Alle Product Types
- Bücher (132)
- Magazine & Zeitschriften (Keine weiteren Ergebnisse entsprechen dieser Verfeinerung)
- Comics (Keine weiteren Ergebnisse entsprechen dieser Verfeinerung)
- Noten (Keine weiteren Ergebnisse entsprechen dieser Verfeinerung)
- Kunst, Grafik & Poster (Keine weiteren Ergebnisse entsprechen dieser Verfeinerung)
- Fotografien (Keine weiteren Ergebnisse entsprechen dieser Verfeinerung)
- Karten (Keine weiteren Ergebnisse entsprechen dieser Verfeinerung)
- Manuskripte & Papierantiquitäten (Keine weiteren Ergebnisse entsprechen dieser Verfeinerung)
Zustand Mehr dazu
- Neu (104)
- Wie Neu, Sehr Gut oder Gut Bis Sehr Gut (4)
- Gut oder Befriedigend (19)
- Ausreichend oder Schlecht (5)
- Wie beschrieben (Keine weiteren Ergebnisse entsprechen dieser Verfeinerung)
Weitere Eigenschaften
- Erstausgabe (3)
- Signiert (Keine weiteren Ergebnisse entsprechen dieser Verfeinerung)
- Schutzumschlag (Keine weiteren Ergebnisse entsprechen dieser Verfeinerung)
- Angebotsfoto (40)
Sprache (1)
Gratisversand
Land des Verkäufers
Verkäuferbewertung
-
Introduction to Manufacturing Processes and Materials
Buch 22 von 37: Manufacturing Engineering and Materials ProcessingAnbieter: ThriftBooks-Atlanta, AUSTELL, GA, USA
Verkäuferbewertung 5 von 5 Sternen
Hardcover. Zustand: Very Good. No Jacket. May have limited writing in cover pages. Pages are unmarked. ~ ThriftBooks: Read More, Spend Less.
-
Introduction to Manufacturing Processes and Materials
Buch 22 von 37: Manufacturing Engineering and Materials ProcessingAnbieter: ThriftBooks-Atlanta, AUSTELL, GA, USA
Verkäuferbewertung 5 von 5 Sternen
Hardcover. Zustand: Good. No Jacket. Pages can have notes/highlighting. Spine may show signs of wear. ~ ThriftBooks: Read More, Spend Less.
-
Introduction to Manufacturing Processes and Materials
Buch 22 von 37: Manufacturing Engineering and Materials ProcessingAnbieter: ThriftBooks-Dallas, Dallas, TX, USA
Verkäuferbewertung 5 von 5 Sternen
Hardcover. Zustand: Good. No Jacket. Pages can have notes/highlighting. Spine may show signs of wear. ~ ThriftBooks: Read More, Spend Less.
-
Understanding the Manufacturing Process Vol. 12 : Key to Successful Cad/cam Implementation
Buch 36 von 37: Manufacturing Engineering and Materials ProcessingAnbieter: Better World Books, Mishawaka, IN, USA
Verkäuferbewertung 5 von 5 Sternen
Erstausgabe
Zustand: Very Good. 1st Edition. Pages intact with possible writing/highlighting. Binding strong with minor wear. Dust jackets/supplements may not be included. Stock photo provided. Product includes identifying sticker. Better World Books: Buy Books. Do Good.
-
Understanding the Manufacturing Process: Key to Successful Cad/CAM Implementation
Buch 36 von 37: Manufacturing Engineering and Materials ProcessingAnbieter: ThriftBooks-Atlanta, AUSTELL, GA, USA
Verkäuferbewertung 5 von 5 Sternen
Hardcover. Zustand: Very Good. No Jacket. May have limited writing in cover pages. Pages are unmarked. ~ ThriftBooks: Read More, Spend Less.
-
Manufacturing engineering: An introduction to the basic functions (Manufacturing engineering and materials processing)
Buch 25 von 37: Manufacturing Engineering and Materials ProcessingAnbieter: ThriftBooks-Atlanta, AUSTELL, GA, USA
Verkäuferbewertung 5 von 5 Sternen
Hardcover. Zustand: Very Good. No Jacket. Former library book; May have limited writing in cover pages. Pages are unmarked. ~ ThriftBooks: Read More, Spend Less 1.05.
-
Assembly Automation and Product Design (Manufacturing Engineering and Materials Processing) (Volume 37)
Buch 10 von 37: Manufacturing Engineering and Materials ProcessingAnbieter: Anybook.com, Lincoln, Vereinigtes Königreich
Verkäuferbewertung 5 von 5 Sternen
EUR 10,84
EUR 15,33 Versand
Versand von Vereinigtes Königreich nach USAAnzahl: 1 verfügbar
In den WarenkorbZustand: Fair. Volume 37. This is an ex-library book and may have the usual library/used-book markings inside.This book has hardback covers. In fair condition, suitable as a study copy. No dust jacket. Please note the Image in this listing is a stock photo and may not match the covers of the actual item,800grams, ISBN:0824785479.
-
Assembly Automation and Product Design
Buch 10 von 37: Manufacturing Engineering and Materials ProcessingAnbieter: Anybook.com, Lincoln, Vereinigtes Königreich
Verkäuferbewertung 5 von 5 Sternen
EUR 10,84
EUR 15,33 Versand
Versand von Vereinigtes Königreich nach USAAnzahl: 1 verfügbar
In den WarenkorbZustand: Poor. This is an ex-library book and may have the usual library/used-book markings inside.This book has hardback covers. In poor condition, suitable as a reading copy. No dust jacket. Please note the Image in this listing is a stock photo and may not match the covers of the actual item,800grams, ISBN:0824785479.
-
Assembly Automation and Product Design (Manufacturing Engineering and Materials Processing) (Volume 37)
Buch 10 von 37: Manufacturing Engineering and Materials ProcessingAnbieter: Anybook.com, Lincoln, Vereinigtes Königreich
Verkäuferbewertung 5 von 5 Sternen
EUR 10,84
EUR 15,33 Versand
Versand von Vereinigtes Königreich nach USAAnzahl: 1 verfügbar
In den WarenkorbZustand: Fair. Volume 37. This is an ex-library book and may have the usual library/used-book markings inside.This book has hardback covers. In fair condition, suitable as a study copy. No dust jacket. Please note the Image in this listing is a stock photo and may not match the covers of the actual item,800grams, ISBN:0824785479.
-
Factory Information Systems: Design and Implementation for CIM Management and Control
Buch 33 von 37: Manufacturing Engineering and Materials ProcessingAnbieter: ThriftBooks-Dallas, Dallas, TX, USA
Verkäuferbewertung 5 von 5 Sternen
Hardcover. Zustand: Very Good. No Jacket. Former library book; May have limited writing in cover pages. Pages are unmarked. ~ ThriftBooks: Read More, Spend Less.
-
Strengthening of Ceramics : Treatment, Tests, and Design Applications (Manufacturing Engineering and Matreials Processing; 3)
Buch 14 von 37: Manufacturing Engineering and Materials ProcessingSprache: Englisch
Verlag: Marcel Dekker, Inc., New York, New York, U.S.A., 1979
ISBN 10: 0824768515 ISBN 13: 9780824768515
Anbieter: PsychoBabel & Skoob Books, Didcot, Vereinigtes Königreich
Verkäuferbewertung 5 von 5 Sternen
Erstausgabe
EUR 26,27
EUR 14,30 Versand
Versand von Vereinigtes Königreich nach USAAnzahl: 1 verfügbar
In den Warenkorbhardcover. Zustand: Acceptable. Zustand des Schutzumschlags: No Dust Jacket. First Edition, First Printing. Cover has general wear of head and tail of spine and corners. Head of spine detached from covers and repaired with tape. Large scrape to tail of spine. Second inner paper hinge split. Library plate on front inside cover. Library stamp on prelims and back inside cover. One dog-eared page. Pages are clean and bright. Ex-Library.
-
Manufacturing Engineering and Materials Processing: Manufacturing Engineering Processes (Volume 40)
Buch 29 von 37: Manufacturing Engineering and Materials ProcessingAnbieter: Anybook.com, Lincoln, Vereinigtes Königreich
Verkäuferbewertung 5 von 5 Sternen
EUR 29,89
EUR 15,33 Versand
Versand von Vereinigtes Königreich nach USAAnzahl: 1 verfügbar
In den WarenkorbZustand: Good. Volume 40. This is an ex-library book and may have the usual library/used-book markings inside.This book has hardback covers. Clean from markings. In good all round condition. No dust jacket. Please note the Image in this listing is a stock photo and may not match the covers of the actual item,900grams, ISBN:0824791290.
-
Manufacturing Engineering: An Introduction to the Basic Functions, Second Edition, Revised and Expanded
Buch 25 von 37: Manufacturing Engineering and Materials ProcessingAnbieter: ThriftBooks-Dallas, Dallas, TX, USA
Verkäuferbewertung 5 von 5 Sternen
Hardcover. Zustand: Very Good. No Jacket. May have limited writing in cover pages. Pages are unmarked. ~ ThriftBooks: Read More, Spend Less.
-
Assembly Automation and Product Design
Buch 10 von 37: Manufacturing Engineering and Materials ProcessingAnbieter: Majestic Books, Hounslow, Vereinigtes Königreich
Verkäuferbewertung 4 von 5 Sternen
EUR 44,88
EUR 7,44 Versand
Versand von Vereinigtes Königreich nach USAAnzahl: 1 verfügbar
In den WarenkorbZustand: New. pp. 413.
-
Assembly Automation and Product Design
Buch 10 von 37: Manufacturing Engineering and Materials ProcessingAnbieter: Better World Books Ltd, Dunfermline, Vereinigtes Königreich
Verkäuferbewertung 5 von 5 Sternen
EUR 49,81
EUR 5,72 Versand
Versand von Vereinigtes Königreich nach USAAnzahl: 1 verfügbar
In den WarenkorbZustand: Good. Former library copy. Pages intact with minimal writing/highlighting. The binding may be loose and creased. Dust jackets/supplements are not included. Includes library markings. Stock photo provided. Product includes identifying sticker. Better World Books: Buy Books. Do Good.
-
Internationale AusgabeAssembly Automation and Product Design (Manufacturing Engineering and Materials Processing)
Buch 10 von 37: Manufacturing Engineering and Materials ProcessingAnbieter: Salish Sea Books, Bellingham, WA, USA
Verkäuferbewertung 5 von 5 Sternen
Zustand: Good. 2. ** Indian / International Edition published in Softcover binding under ISBN 1574446436 **; Good; Softcover; 2nd Edition; Covers are still glossy with a few minor handling-marks; The endpapers and text pages are all clean and unmarked; The binding is excellent with a straight spine; This book will be shipped in a sturdy cardboard box with foam padding; Medium Format (8.5" - 9.75" tall); 1.9 lbs; Gray, yellow, and black covers with title in black lettering; 2005, CRC Press; 530 pages; "Assembly Automation and Product Design (Manufacturing Engineering and Materials Processing)," by Geoffrey Boothroyd.
-
Assembly Automation And Product Design
Buch 10 von 37: Manufacturing Engineering and Materials ProcessingAnbieter: Romtrade Corp., STERLING HEIGHTS, MI, USA
Verkäuferbewertung 5 von 5 Sternen
Zustand: New. This is a Brand-new US Edition. This Item may be shipped from US or any other country as we have multiple locations worldwide.
-
ASSEMBLY AUTOMATION AND PRODUCT DESIGN
Buch 10 von 37: Manufacturing Engineering and Materials ProcessingAnbieter: Easton's Books, Inc., Mount Vernon, WA, USA
Verkäuferbewertung 5 von 5 Sternen
Hardcover. Zustand: VG+. Hardback in Very Good+ condition without dust jacket. Manufacturing Engineering And Materials Processing. 165 X 25 X 241 millimeters. 432 pages. Straight volume with clean interior and minor bumping to corners. Quick shipping, excellent customer service. All books carefully packaged in boxes and ship with tracking information.
-
Internationale Ausgabe
Statistical Process Control In Manufacturing Practice (Hb 1997)
Buch 35 von 37: Manufacturing Engineering and Materials ProcessingAnbieter: Romtrade Corp., STERLING HEIGHTS, MI, USA
Verkäuferbewertung 5 von 5 Sternen
Zustand: New. Brand New. Soft Cover International Edition. Different ISBN and Cover Image. Priced lower than the standard editions which is usually intended to make them more affordable for students abroad. The core content of the book is generally the same as the standard edition. The country selling restrictions may be printed on the book but is no problem for the self-use. This Item maybe shipped from US or any other country as we have multiple locations worldwide.
-
Internationale Ausgabe
COLD ROLLING OF STEEL
Buch 21 von 37: Manufacturing Engineering and Materials ProcessingAnbieter: Romtrade Corp., STERLING HEIGHTS, MI, USA
Verkäuferbewertung 5 von 5 Sternen
Zustand: New. Brand New. Soft Cover International Edition. Different ISBN and Cover Image. Priced lower than the standard editions which is usually intended to make them more affordable for students abroad. The core content of the book is generally the same as the standard edition. The country selling restrictions may be printed on the book but is no problem for the self-use. This Item maybe shipped from US or any other country as we have multiple locations worldwide.
-
Cold Rolling of Steel
Buch 21 von 37: Manufacturing Engineering and Materials ProcessingAnbieter: Better World Books, Mishawaka, IN, USA
Verkäuferbewertung 5 von 5 Sternen
Zustand: Good. Pages intact with minimal writing/highlighting. The binding may be loose and creased. Dust jackets/supplements are not included. Stock photo provided. Product includes identifying sticker. Better World Books: Buy Books. Do Good.
-
Manufacturing Engineering: An Introduction to the Basic Functions
Buch 25 von 37: Manufacturing Engineering and Materials ProcessingAnbieter: Anybook.com, Lincoln, Vereinigtes Königreich
Verkäuferbewertung 5 von 5 Sternen
EUR 56,23
EUR 15,33 Versand
Versand von Vereinigtes Königreich nach USAAnzahl: 1 verfügbar
In den WarenkorbZustand: Good. This is an ex-library book and may have the usual library/used-book markings inside.This book has hardback covers. In good all round condition. Please note the Image in this listing is a stock photo and may not match the covers of the actual item,700grams, ISBN:0824774043.
-
Manufacturing Vol. 63 : Design, Production, Automation, and Integration
Buch 8 von 37: Manufacturing Engineering and Materials ProcessingAnbieter: Better World Books, Mishawaka, IN, USA
Verkäuferbewertung 5 von 5 Sternen
Zustand: Very Good. Pages intact with possible writing/highlighting. Binding strong with minor wear. Dust jackets/supplements may not be included. Stock photo provided. Product includes identifying sticker. Better World Books: Buy Books. Do Good.
-
Programmable Controllers for Factory Automation
Buch 32 von 37: Manufacturing Engineering and Materials ProcessingAnbieter: PBShop.store US, Wood Dale, IL, USA
Verkäuferbewertung 5 von 5 Sternen
PAP. Zustand: New. New Book. Shipped from UK. Established seller since 2000.
-
Programmable Controllers for Factory Automation
Buch 32 von 37: Manufacturing Engineering and Materials ProcessingAnbieter: PBShop.store UK, Fairford, GLOS, Vereinigtes Königreich
Verkäuferbewertung 4 von 5 Sternen
EUR 79,31
EUR 5,74 Versand
Versand von Vereinigtes Königreich nach USAAnzahl: 4 verfügbar
In den WarenkorbPAP. Zustand: New. New Book. Shipped from UK. Established seller since 2000.
-
Adhesives in Manufacturing
Buch 24 von 37: Manufacturing Engineering and Materials ProcessingAnbieter: ThriftBooksVintage, Tukwila, WA, USA
Verkäuferbewertung 5 von 5 Sternen
Erstausgabe
Hardcover. Zustand: Good. No Jacket. First Edition. First edition, first printing. Shelf and handling wear to cover and binding, with general signs of previous use. Previous owner's name on lower edge block. Text is clear of markings. Binding is secure. Secure packaging for safe delivery.
-
Factory Information Systems: Design and Implementation for Cim Management and Control
Buch 33 von 37: Manufacturing Engineering and Materials ProcessingAnbieter: Majestic Books, Hounslow, Vereinigtes Königreich
Verkäuferbewertung 4 von 5 Sternen
EUR 85,54
EUR 7,44 Versand
Versand von Vereinigtes Königreich nach USAAnzahl: 3 verfügbar
In den WarenkorbZustand: New. pp. 256.
-
Strengthening of Ceramics: Treatments: Tests, and Design Applications (Manufacturing Engineering and Materials Processing)
Buch 14 von 37: Manufacturing Engineering and Materials ProcessingAnbieter: Majestic Books, Hounslow, Vereinigtes Königreich
Verkäuferbewertung 4 von 5 Sternen
EUR 85,54
EUR 7,44 Versand
Versand von Vereinigtes Königreich nach USAAnzahl: 3 verfügbar
In den WarenkorbZustand: New.
-
Metallurgical Design of Flat Rolled Steels (Manufacturing Engineering and Materials Processing)
Buch 34 von 37: Manufacturing Engineering and Materials ProcessingAnbieter: Majestic Books, Hounslow, Vereinigtes Königreich
Verkäuferbewertung 4 von 5 Sternen
EUR 86,56
EUR 7,44 Versand
Versand von Vereinigtes Königreich nach USAAnzahl: 3 verfügbar
In den WarenkorbZustand: New. pp. 726.
-
Introduction to Manufacturing Processes and Materials
Buch 22 von 37: Manufacturing Engineering and Materials ProcessingAnbieter: Majestic Books, Hounslow, Vereinigtes Königreich
Verkäuferbewertung 4 von 5 Sternen
EUR 89,29
EUR 7,44 Versand
Versand von Vereinigtes Königreich nach USAAnzahl: 3 verfügbar
In den WarenkorbZustand: New. pp. 412.
